Results 5,026 to 5,050 of 13303
Thread: Ask the experts
-
06-22-2021, 02:18 PM #5026
Can you post a pic? Your verbal description is a little confusing.
Forum Cross Pollinator, gratuitously strident
-
06-22-2021, 03:48 PM #5027Registered User
- Join Date
- Feb 2008
- Location
- Donner Summit
- Posts
- 1,251
Another option for the bar/commute ride - get some "normal" looking shoes that are walkable but will take an SPD cleat. Something like this:
https://www.moosejaw.com/product/gir...-shoe_10486385
https://www.specialized.com/us/en/2f...=300591-187391
Or even this:
https://www.rei.com/product/111667/s...e-sandals-mens
-
06-22-2021, 05:28 PM #5028
Questions about parts compatibility....
So at some point I'm going to have to replace the 12-speed Eagle drivetrain on my Spur. 12-speed selection is still very limited and I'm not sure I could stomach the prices for XG level components anyways. $300-400 for an XG cassette??? Fuck....
Might drop back to 11 speed or switch to Shimano depending on availability. What is compatible with what these days between SRAM/Shimano and 11 and 12 speed?
I think I could use a 12 speed chain on 11 speed drivetrain. Can I use 12 speed shifter/derailler with an 11 speed cassette and just limit shifting using limit screws? Can I use Shimano cassette/chain with SRAM shifter/derailler or vice versa? Are chainrings or cranks specific to one speed or the other, or do you just have to have the correct mounting interface for each?
Any other compatibility gotcha's or hacks to consider?
-
06-22-2021, 05:30 PM #5029
What freehub body (or hub) do you have?
That may guide some of this, at least on the wheel.Forum Cross Pollinator, gratuitously strident
-
06-22-2021, 05:46 PM #5030
The Spur is a Stans Neo something or other, with SRAM Eagle drivetrain - so XD drive. Still have Mojo3 which is currently Shimano 11 speed, so HG.
Converting the Spur to HG is a possibility. Probably wouldn't go to Microspline - if I'm going to switch to Shimano it would likely be 11 speed since 12 isn't available and is more expensive anyways.
-
06-22-2021, 05:54 PM #5031
Ok, just making sure you had the freehub part covered.
Forum Cross Pollinator, gratuitously strident
-
06-22-2021, 06:43 PM #5032
I'm hardly an expert but I think I have some answers. An 11 speed cassette doesn't just have one less gear but different spacing between gears so mixing and matching 11 speed and 12 speed generally doesn't work with some very limited exceptions (I'll get to that shortly).
SRAM shifters cannot be mixed with Shimano derailleurs and vice versa because the shifters pull different amounts of cable for each click.
You have some things going for you, though, mainly the XD driver. HG drivers will only let you go down to an 11 tooth cog. With XD you can go down to 9.
If you replace 12 speed parts on your Spur what are your needing other than the cassette? If you go to 11 speed you'll need a shifter, cassette, and possibly derailleur.*
*With Shimano 10 and 11 speed you could run a 10 speed shifter with an 11 speed derailleur. I did this a few times to run a wide range 10 speed cassette because the 10 speed derailleur didn't with as well with wide range cassettes. This is possible because the shifter is responsible for the gear indexing, not the derailleur. You might be able to do this with SRAM - not sure.
If all you are replacing is the cassette, gx might be more cost effective than buying an 11 speed shifter, derailleur and cassette. If you are currently running a 10-51 tooth cassette and use the 51 very often you'll need to find an 11 speed cassette with similar range or change your chainring. I have personally had good success with the e*thirteen 9-46 11 speed cassette.
Hope that helps. Maybe somebody else can fill in the gaps.
Seth
Sent from my SM-N986U using Tapatalk
-
06-22-2021, 06:45 PM #5033
-
06-22-2021, 07:21 PM #5034
Ask the experts
Where do you find these “new chains” you speak of?
The shops don’t have any, the online retailers do t have any and 75% of the chains currently being sold on Amazon are counterfeits.
The story of counterfeit chains is directly from a bigger bike brand’s product manager, who has complete bikes (less a chain) ready to ship, but can’t get Shimano,SRAM, KMC to supply them with chains.
They started to order and pay retail for chains, and once the actual online bike business suppliers dried up, they went to Amazon, but soon realized 75% of every chain they received was a counterfeit.
-
06-22-2021, 07:27 PM #5035
Any recommendations for a cell phone holder for the mtb bars for the occasional ride where I need to keep checking that I'm on the right trail? I really prefer to not have to put a special case on the phone if there is a good alternative. Anyone have anything cheap and reliable that fits the bill?
-
06-22-2021, 10:22 PM #5036
To move back from 12sp to 11sp I'd need a new cassette, possibly a chain - I'll have to check the parts bin. Pretty sure I still have two pairs of 11sp SRAM shifter and rear D. One used but in good shape, the other new. Prolonging cassette life by swapping out chains more frequently like D(C) mentions is definitely an option. Does this preserve chainring life as well?
Regardless I'd like to have some spares on hand in case anything breaks. If I stay with 12sp and try to prolong drivetrain life I'd want a new rear D and possibly shifter to be safe, plus a chain or two. Parts availability is an issue there since this would all be 12sp, and these are things I'd want now. On the other hand I could gather a complete 11sp drivetrain and replace it all when current drivetrain is worn out or something breaks. 11sp stuff would be easier to find now.
Hmm...
I hear you. I'm accustomed to running a drivetrain into the ground then replacing cassette/chain/chainring. But that is with cassettes only costing $70. The math changes when they cost several times that. If I can't find chains hands are tied though.
Just planning ahead. Availability is definitely a concern so part of the math is considering stepping back to 11sp which seems a bit easier to find than 12sp. Hell, I'd even go back to 10sp. I used to be able to push a 36T cassette. Going to a smaller chainring up will help compensate. And at a lighter weight. I don't need the higher gears. By the time I could make use of a 9 speed cog I'd have to be going downhill anyways, in which case I'll just let gravity take over.
-
06-22-2021, 10:22 PM #5037
Here’s more depressing info regarding chains:
https://zerofrictioncycling.com.au/w...017/12/RRG.pdf
If you’re replacing your chains at 0.5, you’ll be going through a lot of chains.
-
06-22-2021, 10:59 PM #5038Registered User
- Join Date
- Oct 2010
- Posts
- 1,961
-
06-22-2021, 11:13 PM #5039
With most 11 speed chains or cheaper 12 speed chains, they only last 2-3 month. For 11 speed, my strategy is to buy the cheapest chain I can find and replace as needed.
X01 and better SRAM chains are quite impressive. They’ll go a whole year before reaching 0.5% elongation. They’re definitely worth the money over GX or NX. No idea about Shimano.
And yeah, buying chains is a problem. I have an okay hoard going.
-
06-23-2021, 12:37 AM #5040
Apparently I milk my chains while others queso theirs. 2 months??
-
06-23-2021, 02:25 AM #5041
-
06-23-2021, 05:25 AM #5042
FWIW all of my and my wife's bikes are still on 11 speed for the reasons you bring up - generally better cost and availability. I've also standardized on driver type to make spare swapping much easier. This has saved me in a pinch. Maybe it does make sense if you have other bikes with 11 speed already...
Sent from my SM-N986U using Tapatalk
-
06-23-2021, 07:55 AM #5043
This may have been covered but are Dynaplugs much more effective than bacon strips? I put a new rear tire on a couple weeks ago and of course punctured it almost immediately. Bacon stripped it on the ride and it held fine until the next ride when the bacon pulled out while climbing a rock garden. Checked out the dynaplugs at my LBS and they seem more secure due to the bead head thingy securing the plug on the inside of the tire, but I passed since it's $50 for a kit of like 4 plugs which is borderline insane.
Alternatively for a more permanent repair is it best to just patch the inside of the tire? I ran out of bacon and had to put a tube in there on the second flat so I have to take the tire off regardless. I've always had success with bacon strips being essentially permanent repairs as long as it's not a sidewall puncture but this hole seems more finicky than others (hehe)
-
06-23-2021, 08:01 AM #5044
-
06-23-2021, 08:05 AM #5045
Stan’s Darts kick both of there asses up and down the block, in my experience.
(Sample size of six darts)Forum Cross Pollinator, gratuitously strident
-
06-23-2021, 08:22 AM #5046
-
06-23-2021, 08:38 AM #5047
Haven't tried them yet, but the darts look really good.
But the main selling point of dynaplugs is that plugging and reinflation happens all at the same time. The air goes in through the hole that's being plugged. It's not really meant to be long lasting - it's meant to be a super quick fix so you can finish a race without losing much time.
-
06-23-2021, 09:12 AM #5048
The dynaplug kit I was looking at didn't have an air component hence why I was thrown off by the $50 price tag, but I see they do make that which definitely looks cool for a rapid fix. I don't race so a long lasting plug is far more important to me than a super speedy application. I'll give the darts a shot and see how they go
-
06-23-2021, 09:23 AM #5049
I bet that was the whole kit you saw - it's pretty small. The applicator tip has an air port in it. So you screw a CO2 onto the tool, jam the tool with a plug into the tire, crack the CO2 and inflate. Then when you pull the tool out, the plug stays in and the tire (theoretically) stays inflated. It's a slick system, but yeah, there's better options for no hurry / long term repairs.
-
06-23-2021, 09:23 AM #5050
Bookmarks