Results 6,926 to 6,950 of 13303
Thread: Ask the experts
-
01-26-2022, 05:53 PM #6926
Ask the experts
Has Five Ten ever explained why for Flats if you want a stiff DH shoe, you can have the wide last with laces? Maybe one variation of it, but it’ll be such a marketing committee abomination it’ll only come up once every 3-4 years?
And why, if you want a softer shoe, you get a dozen variations. Then the real kicker is, they’re all narrow?
Oh, and if you want laces with a Velcro strap over, you can fuck right off?
Sent from my iPhone using TGR ForumsHowever many are in a shit ton.
-
01-26-2022, 06:06 PM #6927Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
Same scenario with a reconstructed ACL, the pro's never said I should unclip but it seemed like a smart idea, I still had some old hightop 661 axo duallys from the free ride days, they have a whole bunch of ankle padding which I like for when i get caught between a rock and a hard place but really I don't think it matters that much what flat shoe
Got a pair of Race Face Chesters, they have long screws that fit in the squiggly pattern on the soles for pretty good traction on the peddle but I think Chester will rip up the shins never mind the rocks so I don't get on the bike without knee & elbow pads
I have since gone E-bike and probably won't go back to clips, besides Flats are better for bar hoppingLee Lau - xxx-er is the laziest Asian canuck I know
-
01-26-2022, 06:38 PM #6928
-
01-26-2022, 06:52 PM #6929Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
Chester is cheap, some kind of plastic that doesnt stick to rocks doesnt break with some big screws sticking out, all flats have big screws sticking out, I'm pretty sure the traction comes from the big screws, a big screw is a big screw
Lee Lau - xxx-er is the laziest Asian canuck I know
-
01-26-2022, 10:04 PM #6930
-
01-26-2022, 11:43 PM #6931
-
01-27-2022, 08:17 AM #6932www.dpsskis.com
www.point6.com
formerly an ambassador for a few others, but the ski industry is... interesting.
Fukt: a very small amount of snow.
-
01-27-2022, 08:20 AM #6933www.dpsskis.com
www.point6.com
formerly an ambassador for a few others, but the ski industry is... interesting.
Fukt: a very small amount of snow.
-
01-27-2022, 09:06 AM #6934
For sure. Even if "meaningful" is kind of a low bar if you can remember how to separate the observations between meaningful and not.
For example, I'm pretty sure you could mount up the greatest wheels and tires ever and not hide the suck of trying to climb a hill with 25% AS suspension.
What I parsed from joetron's post went something like this: a loaner wheel/tire combo had a moderately high moment of inertia (didn't accelerate particularly quick) so was either heavy, carrying a lot of weight in the rim and tire, or both. The combo allowed the bike/rider to hold a line with more stability, so either less torque imparted to the bars or less course corrections or both (the fact of holding the intended net line at the end of a corner carries some weight here). That could stem from added gyro effect or more compliance, either in the rim or the tire (or both). There's more, but climberevan probably gets the idea. This isn't MTBR, it's just off season.
I'll probably ask more questions later. Just by way of a trigger warning.
-
01-27-2022, 09:32 AM #6935Not a skibum
- Join Date
- Aug 2002
- Location
- PA
- Posts
- 2,664
-
01-27-2022, 09:39 AM #6936
I got a pair of one ups for my hardtail that my wife and I share with the mac-ride for our son, we don't thrash them, to be fair, but decent platform and lots of grip
https://can.oneupcomponents.com/coll...cts/comp-pedal
-
01-27-2022, 10:12 AM #6937Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
A flat pedal is a chunk of plastic or aluminium with 8 screws sticking out, if I can't taste the coolaid do have covid ?
yeah the Fookers look like a Chester knock-off or the question might be whom is knocking off whom ? They come in 6 colors so you can match something on the bike or whatever
Shop bro thru in the Chesters, sez he has probably sold 150 pair and only had one come back so I doubt i will need to buy more pedals
To keep that E-motor on the boil I tend to just keep pedaling at the same cadence to keep moving and hit a LOT of rocks stumps & stuff that I would not on an acoustic bikeLee Lau - xxx-er is the laziest Asian canuck I know
-
01-27-2022, 10:44 AM #6938one of those sickos
- Join Date
- Oct 2005
- Location
- Tahoe-ish
- Posts
- 3,152
How does this jive with the common argument that mopeds actually require effort and somehow allow their riders to gain MORE fitness by going longer? It sure sounds like you're aknowledging the fact that the only effort required is to keep the pedals moving in circles....
My GF has Chester/Fooker pedals and complains that they are TOO grippy. I've told her that pedals are supposed to be grippy and that they don't strive to create slippery ones. She's just terrified beyond all reason of crashing and not getting her feet free. I gave up on trying to get her to go clipless after she started regularly doing 50 mile MTB rides on her flats. It obviously works for her, so it's not worth arguing over.
To further stir the pot: when you guys compare skis do you do it on different days, in different conditions, and in different boots?ride bikes, climb, ski, travel, cook, work to fund former, repeat.
-
01-27-2022, 10:45 AM #6939
-
01-27-2022, 10:59 AM #6940
Of course not. I make a list at the beginning of the year, and on January 7th (the day that, according to meteorological data has the most representative snow conditions for North America), I show up at the hill with 30 pairs of skis that have all been structured and waxed identically, and with bevels set to the factory recommendations. I diligently ski precisely the same run on each ski and note my conclusions in a spreadsheet. It gets tricky though, because by about 11:30 a.m. the snow has warmed up a bit, which obviously renders any further comparisons completely meaningless.
-
01-27-2022, 11:24 AM #6941
That's what I try to do, but I'm short on stamina so I narrow it down to about 6. Good call using January 7, though, that's always my go to as well. It's probably the wrong forum for it, but my spreadsheet coefficients for accounting for tiring legs could really use some help. I'm stuck in a linear regression model like it's the 1990's or something. Perhaps the spreadsheet guys can assist?
-
01-27-2022, 11:31 AM #6942Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
Shop bro told me they don't sell electric mopeds cuz they are not legal but you could get an argument from somebody who sells electric mopeds, I could order an E moped with a throttle on line and the courier will deliver it to my door
In comparison your local LBS ( norco, Santa cruz ect ) sells pedal assisted E-bikes with no throttle, they are governed to < 32 kph, yes you can just move the pedals or you can pedal harder, I think most mtn bikers will pedal harder
For me I go out for the same amount of time or usually longer as I did on the acoustic bike on the exact same trails as i did on an acoustic bike, they are all on a bluff so go straight up, I pedal at a constant rate and ride about 3 times as far, and I do lose weight that I never did on an acoustic bike
so to answer your question IME the motor smooths out the effort needed and lengthens the ride on steep hills, keeps the heart at a healthier BPM, and I lose weight
I supose how a flat grips will depend on the shoe/ pin interface, I'm using a shoe that was popular 20 yrs ago, seems to work
IME/IMO you can't really compare skis on different conditionsLast edited by XXX-er; 01-27-2022 at 12:00 PM.
Lee Lau - xxx-er is the laziest Asian canuck I know
-
01-27-2022, 11:32 AM #6943
-
01-27-2022, 11:35 AM #6944
-
01-27-2022, 11:42 AM #6945
-
01-27-2022, 03:46 PM #6946
Seconded. HAB's way gnarlier than me, but I fully agree.
Chesters flat out suck. It's almost irresponsible how many folks get sold Chesters as their introduction to flat pedals, and never get a chance to try something better. Deftraps are a night and day difference in terms of grip and stability. Something about the shape of the Chester makes it more likely to flip under pressure and kick your feet off and eat your shins/calf.
In the last few years I went from Crampons (made my feet cramp and not enough grip) to Stamps (pretty good, but not enough grip and they needed a rebuild faster than I'd have expected) to OneUps (thought they were perfect until I tried Deftraps) to Deftraps. Might get weird and try some Tennets, but for the price, it's damn near impossible to beat Deftraps.
-
01-27-2022, 06:00 PM #6947
Hey there: I’m hoping to find a 29er boost wheelset in the i40-50 range (looking to seat 2.6” up to 3.0” tires), and I’d prefer carbon but I’d also prefer not to wait a year. I’m out of the loop, just spent a couple months moving across country. I’d prioritize availability over price. Also no clue what the ideal iw is for that tire size.
-
01-27-2022, 06:57 PM #6948one of those sickos
- Join Date
- Oct 2005
- Location
- Tahoe-ish
- Posts
- 3,152
Farsports and Light Bicycle probably have rims in stock, so delivery would be a few weeks.
On our 29+ bikes she has 50mm IW and I have 40mm. I think the 50 gives a better profile for the 3.0" tires, but if you're likey to go 2.6-2.8" a 40 would prob be better.ride bikes, climb, ski, travel, cook, work to fund former, repeat.
-
01-27-2022, 08:01 PM #6949Registered User
- Join Date
- Oct 2010
- Posts
- 1,961
-
01-27-2022, 08:21 PM #6950
I am running Line Pro 40s on my 29+ bike with 3" tires. I'm with Evan on this one. My 41mm IW rims do fine but 50 would probably be better. Currently running 2.8 studded Terrene Cake Eaters for the winter and they measure out to about 2.7".
Sent from my SM-N986U using Tapatalk
Bookmarks