Check Out Our Shop
Page 555 of 579 FirstFirst ... 550 551 552 553 554 555 556 557 558 559 560 ... LastLast
Results 13,851 to 13,875 of 14453

Thread: Ask the experts

  1. #13851
    Join Date
    Sep 2006
    Location
    North Van
    Posts
    3,791
    Question for the experts - have any of you done a home service on a Rockshox Charger 3 damper? I bought the $75 kit to convert it to Charger 3.1 and am contemplating whether to do the service myself or send it in.

    In terms of comfort with the job, I've done as far as bleeding a Charger 2.1 damper, but have never done a full tear-down. Looking at the service manual, there are a few steps and parts, but no proprietary tools. For those who have taken apart a Charger 3, do you recommend I give it go? Is there anything that's easy to mess up (other than dropping a small part on the floor and having it disappear)? How many beers job is it?

  2. #13852
    Join Date
    Feb 2014
    Location
    NorCal coast
    Posts
    2,152
    Quote Originally Posted by Huskier View Post
    My X2 is making "squish sqwuarsh" sounds and generally riding like shit (blowing through travel despite adequate pressure and 2 spacers), but it has not yet exploded. How do I get Fox to warranty based on funny sounds? Do I loop in the bike mfg? My LBS?

    Second question: I do not want to run another X2, or any Fox for that matter. The hell do I do with the replacement X2 they try to give me? Aren't they sort of infamous for shiftiness at this point?

    Third question: Vivid vs SuperDeluxe. Is the weight penalty juice worth the squeeze? 150mil bike that spends a lot of time on chunky roots.

    Sent from my Pixel 5 using Tapatalk
    My brother bought a used bike with an X2 that shit itself pretty quickly. Filled out a service request from Fox since shock was out of warranty, mailed it in to them and paid the $170 for service. Got a brand new 2024 one sent back. Anecdotally, I've heard the changes in the latest version do fix the self destructive nature of the X2.

    I've got SDUs and Vivids for both my pedal and ebikes. If you're on roots a lot, I'd say the Vivid is worth it. In deep travel they feel pretty similar, but the Touchdown tech on the Vivid damper is really special for small bump. Basically it's position sensitive damping, where the first 15% (?) of shock stroke have the damping full open. SDU is a nice poppy shock that I'd favor for flow trails or trying to weight weenie (it's 200g less for same size).

  3. #13853
    Join Date
    Feb 2014
    Location
    NorCal coast
    Posts
    2,152
    Quote Originally Posted by D(C) View Post
    Question for the experts - have any of you done a home service on a Rockshox Charger 3 damper? I bought the $75 kit to convert it to Charger 3.1 and am contemplating whether to do the service myself or send it in.

    In terms of comfort with the job, I've done as far as bleeding a Charger 2.1 damper, but have never done a full tear-down. Looking at the service manual, there are a few steps and parts, but no proprietary tools. For those who have taken apart a Charger 3, do you recommend I give it go? Is there anything that's easy to mess up (other than dropping a small part on the floor and having it disappear)? How many beers job is it?
    I just got that kit and was going to do it in the next few days. I'll try to remember to say how it goes. I've never worked on a shock damper, but I did damper surgery on a pair of Super Deluxes a few months ago and it wasn't difficult, so this looks comparatively easy as long as I have the instructions in front of me and take my time.

  4. #13854
    Join Date
    Jul 2021
    Posts
    187
    I have warrantied two x2s in the past 6 months with that exact description, no further damage or oil leaking externally needed. They just sent me a brand new 2024 version. Not sure where you are located, but a previous thread made it sound like the west coast Reno service center was a lot more laid back about it than the east coast one.

  5. #13855
    Join Date
    Oct 2002
    Location
    Shadynasty's Jazz Club
    Posts
    10,291
    Quote Originally Posted by Robik View Post
    They are dumping old stocks since Mara Pro V2 got released a few days ago.

    Sent from my Pixel 7 Pro using Tapatalk
    Been on sale for a while, so I was beginning to wonder. Mezzer has too, like a year. Guessing they’ve got an upgraded Mezzer coming out as well but they’re taking their time. So much so that they have 44mm in stock again, which is making it nearly impossible not to order one.
    Remind me. We'll send him a red cap and a Speedo.

  6. #13856
    Join Date
    Sep 2004
    Posts
    578
    Quote Originally Posted by toast2266 View Post
    That doesn't sound like a tire problem. Maybe a suspension setup problem. Or maybe just getting used to a bike that has a bit more travel (albeit mostly in the front) and different kinematics.

    Sent from my SM-S901U using Tapatalk
    I had my offering setup with 160mm fork as well so…


    Sent from my iPhone using TGR Forums

  7. #13857
    Join Date
    Apr 2008
    Location
    Treading Water
    Posts
    7,021

    Ask the experts

    Quote Originally Posted by Whiteroom_Guardian View Post
    Tubeless tires on "non tubeless ready" wheels issue. Ever notice how some brands of tires are tighter than others? Like same wheels and one brand of tire you fight to get on the rim and another brand you can easily pop on by hand with little to no effort?

    I've been running Maxxis Rambler 40 or 42mm tires on these older carbon XC rims for several years now. They only stay on the rims if at 50 pounds or more at least for the first while until the sealant like "glues" the beads in. I had a spoke break recently so had to pull everything apart and start the process over again. I didn't have time to immediately go ride 20 miles so the tire deflates quickly and then the beads unseat and you start all over again. Need a real compressor to get them to seat, throw valve core in as fast as possible, hand inflate to 60psi, frantically start on a ride, still lose PSI but at least the beads stay.

    https://www.feedthehabit.com/easton-...eelset-review/

    Should I stop fucking around and just get actual tubeless gravel wheels?
    2015 called and asked for their question back.
    Seriously, just stick tubes in there. It’s a gravel bike.


    Sent from my iPhone using TGR Forums
    However many are in a shit ton.

  8. #13858
    Join Date
    Mar 2008
    Location
    northern BC
    Posts
    32,625
    Quote Originally Posted by Whiteroom_Guardian View Post
    Tubeless tires on "non tubeless ready" wheels issue. Ever notice how some brands of tires are tighter than others? Like same wheels and one brand of tire you fight to get on the rim and another brand you can easily pop on by hand with little to no effort?

    I've been running Maxxis Rambler 40 or 42mm tires on these older carbon XC rims for several years now. They only stay on the rims if at 50 pounds or more at least for the first while until the sealant like "glues" the beads in. I had a spoke break recently so had to pull everything apart and start the process over again. I didn't have time to immediately go ride 20 miles so the tire deflates quickly and then the beads unseat and you start all over again. Need a real compressor to get them to seat, throw valve core in as fast as possible, hand inflate to 60psi, frantically start on a ride, still lose PSI but at least the beads stay.

    https://www.feedthehabit.com/easton-...eelset-review/

    Should I stop fucking around and just get actual tubeless gravel wheels?
    If you got a known working combo ok but otherwise its a crapshoot and a huge waste of time & money IME
    Lee Lau - xxx-er is the laziest Asian canuck I know

  9. #13859
    Join Date
    Oct 2017
    Location
    Evergreen Co
    Posts
    1,048
    Tubeless works great on gravel bikes… maybe more important than mountain bikes (maybe not when remember getting 2 flats per ride on 26” wheels with tubes) but to the actual question….

    Rim and tire spec matters. There are big variations in tires. You could choose some tires that have a tight fit and call it a day. The hacked version is to add .5-1 more wraps of rim tape. This won’t help them hold pressure initially though.

    Quote Originally Posted by jm2e View Post
    2015 called and asked for their question back.
    Seriously, just stick tubes in there. It’s a gravel bike.


    Sent from my iPhone using TGR Forums

  10. #13860
    Join Date
    Feb 2014
    Location
    NorCal coast
    Posts
    2,152
    Quote Originally Posted by Andeh View Post
    I just got that kit and was going to do it in the next few days. I'll try to remember to say how it goes. I've never worked on a shock damper, but I did damper surgery on a pair of Super Deluxes a few months ago and it wasn't difficult, so this looks comparatively easy as long as I have the instructions in front of me and take my time.
    I did it last night. It took about 3 hours but I did get interrupted in the middle to cook/eat dinner. I didn't think any of it was especially technically challenging, but I do recommend having the instructions printed out to follow along. There was one point at which I started to reassemble part of the compression damper backwards, but caught it quickly and only had to backtrack a couple steps. So, it wasn't hard but it was time consuming. If I like the 3.1 and decide to put it on my other bike's fork, I may just get the complete assembly to save time, since it's just drop-in.

  11. #13861
    Join Date
    Sep 2006
    Location
    North Van
    Posts
    3,791
    Quote Originally Posted by Andeh View Post
    I did it last night. It took about 3 hours but I did get interrupted in the middle to cook/eat dinner. I didn't think any of it was especially technically challenging, but I do recommend having the instructions printed out to follow along. There was one point at which I started to reassemble part of the compression damper backwards, but caught it quickly and only had to backtrack a couple steps. So, it wasn't hard but it was time consuming. If I like the 3.1 and decide to put it on my other bike's fork, I may just get the complete assembly to save time, since it's just drop-in.
    Thanks for the update. Sounds like it’s worth a shot, though making sure I have adequate time blocked off.

  12. #13862
    Join Date
    May 2008
    Location
    On a genuine ol' fashioned authentic steam powered aereoplane
    Posts
    17,109
    So I just went back to the trusty gorilla tape method with two layers. Actual rim tape too thin. Shakeout ride this AM and I think she is good to go again.

    Tubeless at 50psi+ on a steel gravel bike is a dream honestly. I used to run tubes on this same bike for like 1 day and it was WAY harsher.

  13. #13863
    Join Date
    Nov 2005
    Location
    Down In A Hole, Up in the Sky
    Posts
    36,289
    Do, last time I had to do that, I ran a layer of electrical tape first, then one strip of Gorilla Tape. Made removal easy peasy, zero residue. Lasted on my wife’s wheel for over a year.
    I also just got this for cheap.

    Click image for larger version. 

Name:	IMG_1948.jpg 
Views:	60 
Size:	236.7 KB 
ID:	496596
    Forum Cross Pollinator, gratuitously strident

  14. #13864
    Join Date
    Mar 2022
    Posts
    1,187
    Quote Originally Posted by Whiteroom_Guardian View Post
    So I just went back to the trusty gorilla tape method with two layers. Actual rim tape too thin. Shakeout ride this AM and I think she is good to go again.

    Tubeless at 50psi+ on a steel gravel bike is a dream honestly. I used to run tubes on this same bike for like 1 day and it was WAY harsher.
    50+ seems high for tires that size, no?

    I only go that high if I'm not actually riding gravel...pavement or smooth super hardpack.

  15. #13865
    Join Date
    May 2008
    Location
    On a genuine ol' fashioned authentic steam powered aereoplane
    Posts
    17,109
    These tires are rated up to 60psi. All the gravel here is accessed by pavement anyway. To just ride gravel you gotta drive out somewhere and then park. I'm on gravel after a mile or two of pavement from the house. I have run lower pressures and it just feels too slow to me.

  16. #13866
    Join Date
    Jan 2006
    Location
    Carbondale
    Posts
    12,644
    Quote Originally Posted by Whiteroom_Guardian View Post
    These tires are rated up to 60psi. All the gravel here is accessed by pavement anyway. To just ride gravel you gotta drive out somewhere and then park. I'm on gravel after a mile or two of pavement from the house. I have run lower pressures and it just feels too slow to me.
    Most of that may be psychological, which sometimes is reason enough. YMMV
    www.dpsskis.com
    www.point6.com
    formerly an ambassador for a few others, but the ski industry is... interesting.
    Fukt: a very small amount of snow.

  17. #13867
    Join Date
    Feb 2020
    Location
    Wenatchee
    Posts
    153
    Quote Originally Posted by Whiteroom_Guardian View Post
    These tires are rated up to 60psi. All the gravel here is accessed by pavement anyway. To just ride gravel you gotta drive out somewhere and then park. I'm on gravel after a mile or two of pavement from the house. I have run lower pressures and it just feels too slow to me.
    I think the standard argument when people claim that lower pressures feel slower is just that you're not feeling your fillings rattling out of your teeth. All the bro-science would indicate that lower pressures are proven to be quicker as long as you hit the sweet spot. Faffing around with the Silca pressure calculator led to me trying some dramatically lower pressures than I typically would have and I was pleasantly surprised. That said, do whatever damn well please. Its just bikes.

    https://silca.cc/blogs/silca/tire-pr...ator-explained

  18. #13868
    Join Date
    May 2008
    Location
    On a genuine ol' fashioned authentic steam powered aereoplane
    Posts
    17,109
    Hmmm, the calculator said I should be at 42/40 psi. I've been around 50-55. Might have to experiment.

  19. #13869
    Join Date
    Mar 2022
    Posts
    1,187
    I think that’s about right: it might feel slower because of the smoothness, but if you had a power meter and a speedometer you’d see improvements over the same terrain.

  20. #13870
    Join Date
    Apr 2008
    Location
    Treading Water
    Posts
    7,021
    When you guys replace a spoke, do you jut cut a hole in the tape and then “patch” over it with a bit of tape? Or do you pull off all the old tape and start over?


    Sent from my iPhone using TGR Forums
    However many are in a shit ton.

  21. #13871
    Join Date
    Dec 2007
    Location
    Hell Track
    Posts
    14,492
    Quote Originally Posted by jm2e View Post
    When you guys replace a spoke, do you jut cut a hole in the tape and then “patch” over it with a bit of tape? Or do you pull off all the old tape and start over?


    Sent from my iPhone using TGR Forums
    I do a full retape. I've never had good luck with tape patches.

    Sent from my SM-S901U using Tapatalk

  22. #13872
    Join Date
    Jan 2009
    Location
    SLC burbs
    Posts
    4,413
    Quote Originally Posted by Whiteroom_Guardian View Post
    Hmmm, the calculator said I should be at 42/40 psi. I've been around 50-55. Might have to experiment.
    I started in the mid 50s on my gravel steed and a buddy who spends a lot of time out told me to drop that shit. Running 35 to 40ish depending on terrain now but even on pavement the comfort gains vastly offset any loss of efficiency IMO. Makes it possible to bunny hop stuff without fearing for your C-spine.
    "Your wife being mad is temporary, but pow turns do not get unmade" - mallwalker the wise

  23. #13873
    Join Date
    Dec 2007
    Location
    Hell Track
    Posts
    14,492
    I know nothing about gravel tire pressures, but world cup XC guys run around 15 psi, and those tires aren't *that* different than gravel tires. If higher psi was faster, those guys would definitely be running higher pressures. It's not apples to apples, but it's at least apples to some other apple adjacent fruit.

  24. #13874
    Join Date
    Feb 2016
    Location
    Los Angeles/Mammoth
    Posts
    1,360
    Step 1: Go to Silca Calculator and input your specs
    Step 2: Find out that you should be running pressures much lower than you thought
    Step 3: Do it, and go ride

    I and others have likely found out we should be running lower pressures. Give it a shot.

    I run 60 psi in my 32mm road tires, 42 psi in my 40mm semi slicks, 34 psi in my 48mm gravel tires, and 28 in my Race King 2.2s. For reference, I'm 175 lbs


    Sent from my Pixel 8 using Tapatalk

  25. #13875
    Join Date
    Oct 2011
    Posts
    1,337
    Eating crow about my Kryptotal and on a roll with dumb questions: I cannot keep air in my front tire. It's losing at least 10lbs/24hrs. Not a fast enough leak to lose air while riding but still kind of annoying. I've tried adding sealant twice to no avail. Going to try breaking and reseating the bead, are there any special tricks to get it to seat properly? I typically use an air compressor to do the job. It's like I got 99% of the way there... But just short. Failing that, is there any way to troubleshoot a valve core short of just sticking a new one in?

    Sent from my Pixel 5 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •