(Longshot) WTT: 30.9 dropper for 31.6 dropper

[sethschmautz]

I have two 125mm 30.9 non-stealth droppers - a KS Supernatural (i950) and a Reverb both in good condition. I would love to trade one for a 31.6 stealth.

It's a longshot, but I figured someone *may* be in the opposite situation.

Seth

Sent from my SM-N970U using Tapatalk

[Dee Hubbs]

To switch Lower/Outer Tube on the Reverb is a pretty easy job. Especially on the non-stealth.
11.6815.009.020 Lower/Outer Tube 355x100, 380x125/100 31.8
Part is $30. No other parts needed. Just a bleed when done.

[sethschmautz]

DH,

Does that just change 30.9 to 31.6?

Thanks!

Seth

Sent from my SM-N970U using Tapatalk

[Dee Hubbs]

Yep, every internal part is the same. Just the outer tubes are a different sizes/part number for either 30.9, or 31.6.
I might actually have one in the garage. I'll look a bit later tonight.

[sethschmautz]

Thanks!

Sent from my SM-N970U using Tapatalk

[radam]

Or just get this https://www.jensonusa.com/Problem-So...YaAjBUEALw_wcB

Been running one for a long while on my wife's bike (which I have commandeered for stints when my bike has been out of service). Works just fine.

[El Chupacabra]

You could get a shim to fit the 30.9 into a 31.6 sized frame. I did that for a year or two, worked fine.

[WaistDeepGroomers]

To switch Lower/Outer Tube on the Reverb is a pretty easy job. Especially on the non-stealth.
11.6815.009.010 Lower/Outer Tube 355x100, 380x125/100 30.9
Part is $30. No other parts needed. Just a bleed when done.

Do they make these for a 150 mm Reverb?

I have not one but TWO 31.6 150 mm travel dropper posts, would love to convert at least one to 30.9.

[Dee Hubbs]

Do they make these for a 150 mm Reverb?
I have not one but TWO 31.6 150 mm travel dropper posts, would love to convert at least one to 30.9.

Yes if its an A1 or A2 version. (Pre 2017 - Identified by no gold Logo on the station below the saddle clamp)
No if it the B1 version (2017-2019 - Identified by Gold "Rockshox" logo below the saddle clamp)
No it its the C1 version (2020 - Identified by the Gold "Reverb 150" logo below the saddle clamp)

So if its a A1/A2 yes the part # 11.6818.020.030 Lower/Outer Tube 430x150 30.9 - Reverb (includes lower/outertube only).

[Dee Hubbs]

DH,
Does that just change 30.9 to 31.6?
Thanks!
Seth
Sent from my SM-N970U using Tapatalk

See my above post about model identification.
I have the 31.6 lower tube for you if your model is A1/A2.
PM me and I'll post it out to you.

[sethschmautz]

See my above post about model identification.
I have the 31.6 lower tube for you if your model is A1/A2.
PM me and I'll post it out to you.

I will check when I get home. Thanks!!

Seth

Sent from my SM-N970U using Tapatalk

[WaistDeepGroomers]

Yes if its an A1 or A2 version. (Pre 2017 - Identified by no gold Logo on the station below the saddle clamp)
No if it the B1 version (2017-2019 - Identified by Gold "Rockshox" logo below the saddle clamp)
No it its the C1 version (2020 - Identified by the Gold "Reverb 150" logo below the saddle clamp)

So if its a A1/A2 yes the part # 11.6818.020.030 Lower/Outer Tube 430x150 30.9 - Reverb (includes lower/outertube only).

Thank you!!

[sethschmautz]

See my above post about model identification.
I have the 31.6 lower tube for you if your model is A1/A2.
PM me and I'll post it out to you.

Looks like I have the A1 or A2 version. No gold logo.

Sent from my SM-N970U using Tapatalk

[livefreerdie]

Not sure, you may have this resolved, but I am also playing musical cockpits. I have a 2017 Reverb Stealth A2 in 31.6 diameter, 125mm travel, needs to be bled. Push-button lever type. I need a 30.9 external dropper or a 31.6 external dropper for other bikes.