Results 226 to 250 of 349
Thread: Lupo Pro HD thread
-
11-23-2021, 12:09 AM #226I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
Canting options for Lupo?
Also, tech binding canting options? I see cant strips at Tognar that I could custom cut. Anything else out there?
-
11-24-2021, 11:05 PM #227
Cantology makes Dalbello specific ones, but for some reason their website / web presentation is poor.
These won’t work if in pin mode.
-
11-25-2021, 12:19 AM #228I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
Thanks. I'll check it out.
For the pin set up I would be looking at shimming the binding. Not as crucial as the hill set up but it would be nice to be consistent.
That being said, I wonder if cantology shims cause sole clearance issues in tech bindings and is there enough material to router off on the lugs above the tech fittings.
-
11-25-2021, 07:07 AM #229
In a tech binding, you are “floating” on the pins, so no need to router & many (not all) shop techs don’t router the lil amount the cantology changes the lugs. 1 degree is really nothing- dirt/snow are more.
I have used the Tognor shims w good results- just make certain you have 3-4 threads showing to secure the ski.
Cold River Ski Tools also makes shims & can’t kits.
https://shopcoldriver.com/
-
11-25-2021, 10:52 AM #230I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
I’m more like a 3 degree adjustment. I realize the pins make the boot float but essentially the shimmed side of my sole will be a few mm lower when hanging from the pins. I’m curious if that would cause issue, potentially when stepping in.
Some of the confusion might be because I am talking about adjusting for tech bindings and for alpine bindings. On The tech set up I would shim the bindings. On the alpine set up I would shin the sole and router the lugs.
So the question remains, is there a conflict when you router a few mm off the lug above the tech insert? It’s seems like there is only 3mm of material there on other boots I have.
-
11-25-2021, 12:21 PM #231
Shim the binding w tognar stuff.
-
12-02-2021, 11:50 PM #232Registered User
- Join Date
- Jul 2014
- Posts
- 81
-
12-03-2021, 07:00 AM #233Registered User
- Join Date
- Oct 2007
- Posts
- 12,664
Anyone tried and compared the Krypton 130 vs the Lupo HD? I ordered both recently and I'm trying to decide between em. From what I can tell so far, Lupo is cheaper, lighter, walk mode, and removable tongue. The Krypton seems to just be burlier, with a beefier liner, maybe warmer, but has none of those other options.
Basically switching over to one of these two from Lange XT3 140 because I cannot get in and out of that boot without excruciating pain and bruising of my feet. Love the way it skis though!
-
12-03-2021, 12:43 PM #234Registered User
- Join Date
- Mar 2018
- Posts
- 82
Tried the HDs over the summer and didn't like how upright they were. My Kryps are on their forward-most setting, and HDs didn't feel close. Ended up passing on them, though I know people have DIY'd some shims onto the cuff. Fit felt slightly roomier due to different liner too.
Not sure if you've seen the Kryptlupo thread, but people have been replacing the HD carbon cuffs for the PU one from Kryps for more power.
-
12-03-2021, 10:12 PM #235Registered User
- Join Date
- Sep 2020
- Posts
- 21
FYI alpine ski and snowboard co has the 20/21 Pro HD for less than $400 atm
-
12-08-2021, 07:08 PM #236I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
It seems like all the pro HDs this year have the teeth on the ankle buckle t nut poking through the shell. I checked a few boots and saw it. As well as ovalizing the turret on boots that have never been skied.
I’m not sure why they recessed the T nut so far into the shell.
Anyone else notice this? Any failures as a result?
-
12-09-2021, 10:35 AM #237Registered User
- Join Date
- Oct 2007
- Posts
- 12,664
So I bought some Lupo HDs, two pair actually. One is last year's and one is this year's. Any major differences that y'all are noticing besides color? I do like the new one's color a little better, but they'll be $150 more than last years.
-
12-09-2021, 06:18 PM #238King potato
- Join Date
- Feb 2011
- Location
- BC
- Posts
- 1,947
-
12-10-2021, 09:27 AM #239I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
From Dalbello: The ovalization comes like that from the factory and is part of their dynalink patent. As for the t nut, they went with longer teeth this year to hold better but obvs they are too long.
-
12-10-2021, 10:04 AM #240Registered User
- Join Date
- Aug 2006
- Location
- Calgary
- Posts
- 1,888
We had a 120AX warrantied last year that was punched in that exact spot, the circumference where the t-nut is was weakened from stretching and then broke off. I didn't know this when the customer came to get his new warrantied pair and wanted the same spot punched so now that same circumference is weakened again (plastic is 'whitened') so no doubt that will fail on him soon too.
I must say, after having owned the 130 (did ski well) and fitted enough people in the Lupos, Dalbello QC is weak and I'm quite hesitant to put any more people into the boot.
-
12-10-2021, 12:32 PM #241I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
-
12-27-2021, 07:31 PM #242I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
Is Dalbello on crack?
Why is the Lupo HDax softer than the AX120? The former has the C tongue, the latter has a P tongue.
Especially weird given the HD moniker made it stiffer in the 98mm last lupo.
-
12-30-2021, 05:50 PM #243I Like Snow
- Join Date
- Jun 2008
- Location
- Golden
- Posts
- 1,025
I can’t find the post for the fellow who used the krytpon forward lean shim on his lupos. He screwed it into the ledge. I’m about to do the same thing but I want to see if it lasted for him, or how much it ducked to get the boot into and out of walk mode.
-
12-30-2021, 06:17 PM #244King potato
- Join Date
- Feb 2011
- Location
- BC
- Posts
- 1,947
-
01-06-2022, 08:38 PM #245Registered User
- Join Date
- Aug 2021
- Posts
- 343
For anyone with fatter feet considering the Lupo AX HD vice the Pro HD, it's a good boot. Yah, it's marketed with a C tongue, and with said tongue, it's soft AF in the fore, but the clog (PU) and cuff are stiff making it plenty stiff aft and laterally. Swapped for a P or B tongue they are a 130ish flex for sure. For ref, I am 6'2/210, ski bigger lines at a bigger mtn, and push around a Moment CMD 108 and 118 in this boot without issue. Coming from a Lange XT Free Pro and a Doberman Pro before that. Have about 50 days in em now in the stock liner so they're def broken in. Feet are 103/105 mm/high arch and instep, and this is the first boot that gives me the performance I need and didn't need a punch (good for me, maybe not you). Yah, they're upright, more upright than my previous two boots, but after a few days I got used to it (too lazy to DIY). P tongue is sweet spot for me but have the B's on standby should I need em. Use em as a dedicated inbounds boot with some slackcountry. Much prefer these to the XT Free (Grilamid!); too long since I've skied the Doberman's to know but I liked those too. Perhaps too soft for those who ski plugs (I wouldn't know), but anyone looking for a wider performance resort boot that can walk, these fit the bill for sure. Wish I had time in the Pro to provide a direct compare, buuuut, I don't. YMMV.
Last edited by Sylvan; 01-06-2022 at 09:01 PM.
-
01-07-2022, 08:01 AM #246Registered User
- Join Date
- Jan 2022
- Posts
- 9
I was surprised to not see anyone else having issues with the quick lace buckle being a pressure point. Tucking the quick lace buckle behind the tongue causes immense shin pain for me. I had to remove the lacing from the liner to avoid this. Just me?
-
01-07-2022, 04:32 PM #247Registered User
- Join Date
- Aug 2021
- Posts
- 343
-
01-08-2022, 09:19 AM #248Registered User
- Join Date
- Jan 2022
- Posts
- 9
-
01-08-2022, 11:28 AM #249
Update: Intuition Tour wrap + pro HD is a good combo, on the high volume side. No shin issues. If I was only skiing these inbounds I'd be interested in trying the pro wrap instead. I had to add a thicker footbed (super feet green) to fill some of the space, but now I can get a good snug-to-tight fit. Hopefully the liners hold up for a while.
I had some arch pain during the first couple days of use, that's gone now and they are good for a full day of skiing with no pain. I've done maybe 10 miles of uphill in them, no issues there either. These walk so nicely despite the weight... There's not a lot of resistance in the ROM.
I'm happy with this boot... Thankful for advice that steered me in this direction.
Sent from my SM-G965U using Tapatalk
-
02-01-2022, 05:58 AM #250Registered User
- Join Date
- Jan 2022
- Posts
- 9
I see others have reported that the boot boards are moving while they hike.
I have experienced the same problem, with the compound problem that the boot boards are disintegrating around where the lugs in the shell engage.
The boards appear to be made out of some sort of weird material that reminds me more of sturdier styrofoam than plastic, which is probably great for insulating against the cold ground, but is also probably the cause of the easy wear.
Anyone else having this issue?
Bookmarks