Page 1 of 2 1 2 LastLast
Results 1 to 25 of 28
  1. #1
    Join Date
    Aug 2007
    Posts
    6,251

    Enve M60 Forty HV 29" Rims

    These carbon rims only have a few rides on them, No dents and nothing more than some surface scratches on them. One can be registered for warranty with Enve. Comes with unknown aero spokes that came with the Enve rims, and enve nipples, rim tape.

    I'm struggling with a fair price for these. I have them listed locally (UT) for $600, will do $500 for mag? I think that's fair. Shipping to lower 48 for cost of shipping from SLC.

  2. #2
    Join Date
    Dec 2007
    Location
    Hell Track
    Posts
    9,506
    Quote Originally Posted by muted View Post
    Comes with unknown aero spokes that came with the Enve rims, and enve nipples, rim tape.
    Most (all?) Enves I've seen come with Sapim CX-Rays. Which means those are really nice spokes - like $250 worth of spokes.

  3. #3
    Join Date
    Jul 2008
    Posts
    2,918
    What hubs? Boost? Driver type? Been looking for an XC-ish set for some slicker totes for the hardtail.

  4. #4
    Join Date
    Jan 2008
    Location
    BC to CO
    Posts
    2,305
    Quote Originally Posted by muted View Post
    These carbon rims only.
    Comes with unknown aero spokes that came with the Enve rims, and enve nipples, rim.
    Quote Originally Posted by volklpowdermaniac View Post
    What hubs? Boost? Driver type? Been looking for an XC-ish set for some slicker totes for the hardtail.
    I read that they are rims only.
    So I guess they can be what ever hubs you want, what ever spacing you want. What ever driver you want. Even whatever spokes and nipples you want.
    Last edited by Dee Hubbs; 06-02-2019 at 05:12 PM.

  5. #5
    Join Date
    Jul 2008
    Posts
    2,918
    Ha! After I posted that I considered they were probably rims only, then I just went on living my life.

  6. #6
    Join Date
    Aug 2007
    Posts
    6,251
    Click image for larger version. 

Name:	IMG_8463.jpg 
Views:	156 
Size:	2.13 MB 
ID:	284981

    Whoops, sorry I missed these comments. Yes, get what ever hub you want, get them built and have a bad-ass new set of rims for cheaper than some equivalent used ones. Or is my math off?

    Again, one of these can be warrantied. That means use it as a back rim, to me. I think they offer a discount to ones that aren't registered/bought used but check the enve site to be sure.

    These are in near perfect shape. And the spokes def look like bladed Sapim CX-Rays. but there's no logo or anything to identify them.

  7. #7
    Join Date
    Aug 2007
    Posts
    6,251
    Not sure why I can't sell these, make me an offer....

  8. #8
    Join Date
    Oct 2002
    Location
    Shadynasty's Jazz Club
    Posts
    8,586
    Quote Originally Posted by muted View Post
    Not sure why I can't sell these
    Name:  294BC1F5-7E16-4E4C-BADA-FC96D0245C7F-8686-0000057139B992DC.jpg
Views: 652
Size:  94.8 KB
    Remind me. We'll send him a red cap and a Speedo.

  9. #9
    Join Date
    Aug 2007
    Posts
    6,251
    Quote Originally Posted by bagtagley View Post
    Name:  294BC1F5-7E16-4E4C-BADA-FC96D0245C7F-8686-0000057139B992DC.jpg
Views: 652
Size:  94.8 KB
    I've gone to shock therapy to stop this and to get them sold.

    Dropping them to $400 or OBO. 28 holed carbon hoops, get some.

  10. #10
    Join Date
    Mar 2006
    Location
    Missoula, MT
    Posts
    20,745
    It's not that I don't want them...

    Anyway, isn't spoke length an issue as to whether or not you can use the included spokes?

    Are the nipples/spokes used? Is that an issue?

    A bike tech once mentioned to me that you can't reuse rims since once they've been laced up, there is a notch in the hole and therefore it won't fit being laced to a different hub with presumably different dimensions. Bullshit? Depends on the rim?
    No longer stuck.

    Quote Originally Posted by stuckathuntermtn View Post
    Just an uneducated guess.

  11. #11
    Join Date
    Dec 2007
    Location
    Hell Track
    Posts
    9,506
    Quote Originally Posted by stuckathuntermtn View Post
    A bike tech once mentioned to me that you can't reuse rims since once they've been laced up, there is a notch in the hole and therefore it won't fit being laced to a different hub with presumably different dimensions. Bullshit? Depends on the rim?
    Bullshit.

  12. #12
    Join Date
    Mar 2006
    Location
    Missoula, MT
    Posts
    20,745
    I kinda figured as much.
    No longer stuck.

    Quote Originally Posted by stuckathuntermtn View Post
    Just an uneducated guess.

  13. #13
    Join Date
    May 2008
    Location
    On a genuine ol' fashioned authentic steam powered aereoplane
    Posts
    12,823
    Am I wrong in thinking this is a screaming fucking deal?

  14. #14
    Join Date
    Jul 2008
    Posts
    2,918
    I want these for my hardtail, but I have no more moneys to give.

  15. #15
    Join Date
    Aug 2007
    Posts
    6,251
    Quote Originally Posted by toast2266 View Post
    Most (all?) Enves I've seen come with Sapim CX-Rays. Which means those are really nice spokes - like $250 worth of spokes.
    Quote Originally Posted by Whiteroom_Guardian View Post
    Am I wrong in thinking this is a screaming fucking deal?
    OK, I'm ready to just get rid of these fucking things. Dropped the price from $600, now it's $350 OBO.

  16. #16
    Join Date
    Jan 2005
    Location
    Access to Granlibakken
    Posts
    7,786
    Are these 26 mm inner width? I’m building up a wheel set for the GF, looking for 30 mm rims.

  17. #17
    Join Date
    Aug 2007
    Posts
    6,251
    Quote Originally Posted by frorider View Post
    Are these 26 mm inner width? I’m building up a wheel set for the GF, looking for 30 mm rims.
    Yes, specs are here:

    https://www.enve.com/en/installation...chives/m60-hv/

  18. #18
    Join Date
    Jul 2008
    Posts
    2,918
    Quote Originally Posted by muted View Post
    OK, I'm ready to just get rid of these fucking things. Dropped the price from $600, now it's $350 OBO.
    How many holes? Looking at cheap hubs now to see how I can get this whole build under budget
    Do I detect a lot of anger flowing around this place? Kind of like a pubescent volatility, some angst, a lot of I'm-sixteen-and-angry-at-my-father syndrome?

    fuck that noise.

    gmen.

  19. #19
    Join Date
    Jan 2008
    Location
    BC to CO
    Posts
    2,305
    Possible interest. What is the spoke length?

  20. #20
    Join Date
    Aug 2007
    Posts
    6,251
    Quote Originally Posted by volklpowdermaniac View Post
    How many holes? Looking at cheap hubs now to see how I can get this whole build under budget
    28

    Quote Originally Posted by Dee Hubbs View Post
    Possible interest. What is the spoke length?
    I can check tonight

  21. #21
    Join Date
    Jan 2008
    Location
    BC to CO
    Posts
    2,305
    Quote Originally Posted by muted View Post
    I can check tonight
    Or what hub came out of them, I can figure out the length from that.

  22. #22
    Join Date
    Aug 2007
    Posts
    6,251
    OK, they are 292 end-to-end, but I learned that I shoulda measured from end-to-mid-curve if that makes sense. So 292is 1-2mm off is my guess. If you want a more exact measurement I can tonight.

  23. #23
    Join Date
    Apr 2008
    Location
    Treading Water
    Posts
    4,853
    Yea, hook the J-bend over the end of your ruler. The threaded end will give you the length.
    They might all be one length, or there could be 42 of one length and 14 of another length. Or three different or 4 different lengths. It's annoying, but you kinda gotta measure each one to not miss 2mm differences.

    Really, to utilize the spokes, you'd either need to match the hub they came off, or just sell them on ebay.
    Still, that's a Siiiiiiiiiiccckkkkk deal for 2 Enve rims even without the spokes. I'm sure they're a lot more burly than Chinese Ebay hoops.
    Lots of Cream, Lots of Sugar

  24. #24
    Join Date
    Aug 2007
    Posts
    6,251
    Thanks JM2e.

    These are the hubs they came off of: https://wheelbuilder.com/dt-swiss-24...ake-front-hub/

  25. #25
    Join Date
    Apr 2008
    Location
    Treading Water
    Posts
    4,853
    Well fuck me sideways.
    Chances are the flange size/spacing is the same as 6-Bolt 240s as well as with 350s. If so, much bigger potential to match up those spokes.


    Sent from my iPhone using TGR Forums
    Lots of Cream, Lots of Sugar

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •