Results 1 to 6 of 6
  1. #1
    Join Date
    Dec 2004
    Location
    Simi Valley, CA
    Posts
    5,077

    FS: 178 Blizzard Zero G 95, SoCal

    **SOLD**
    So I'm not super fired up to sell these, but not currently using them and thought I'd put out a feeler. Truly excellent condition: mint topsheets, mint edges and bases, really the only thing to mention are two small very shallow marks and some faint swirl marks on bases from rubbing on my pack when a-framed. You can't feel the swirl marks with your fingertip, but can see them if the light is right. Trivial. Probably less than 20 runs on the skis, basically two half-days of spring lift-served and a few one-and-done backcountry runs. Like these a lot, but just have way too many good skis, and am slowly shifting my touring quiver to lengths in the low 170's.

    Binding Freedom inserts for Vipec / Tecton on line for 305 BSL (inserts will fit 295mm BSL to 320mm). Perfect insert job with G/Flex epoxy, done on a vertical mill with digital readout and accurate to 0.001". Yeah it's silly, but if you have access to that kind of equipment, use it.

    **SOLD** $310 net to me, with free shipping to lower 48.

    If these Vipec / Tecton inserts work for you, this is a nice deal considering the cost of the inserts and labor. If the current inserts don't work for you, you might as well spend a little more and get a new pair from the current Spring sales instead. These sticks rally hard, and it wouldn't break my heart to keep 'em.

    Click image for larger version. 

Name:	2017-zero-g-95.jpg 
Views:	84 
Size:	1.16 MB 
ID:	281154
    Last edited by 1000-oaks; 05-11-2019 at 01:34 PM.

  2. #2
    Join Date
    Sep 2016
    Location
    Telluride, CO
    Posts
    22
    Pm sent

  3. #3
    Join Date
    Dec 2004
    Location
    Simi Valley, CA
    Posts
    5,077
    Current inserts fit Vipec / Tecton from 295mm BSL to 320mm, on line for 305. Size 27 Alien RS (294 BSL) can be properly adjusted with the heel all the way forward (I checked it), but that's as short a BSL as you can go.
    Last edited by 1000-oaks; 05-07-2019 at 08:03 AM.

  4. #4
    Join Date
    Dec 2004
    Location
    Simi Valley, CA
    Posts
    5,077
    Got a couple inquiries about local pickup, could do $280. Will also throw in an M5 screw kit (with Vibra-Tite) and hex key.

    SOLD - Also have a pair of twice-used Climbing Skins Direct skins I could throw in for $50. (They're cut for 183 Bro Fat, so you'd have to trim them to fit the narrower 0G.)

    Click image for larger version. 

Name:	IMG_20190510_080831.jpg 
Views:	3 
Size:	993.4 KB 
ID:	282171
    Last edited by 1000-oaks; 05-11-2019 at 07:48 PM.

  5. #5
    Join Date
    Dec 2014
    Location
    Colorado Front Range
    Posts
    2,846
    So normally, the typical "rules" are to subtract $$$ for previous mounts. In the case of 1000-oaks' precision work, I'd argue that there should be an up-charge for the insert installation.

    ... Thom
    Galibier Design
    crafting technology in service of music

  6. #6
    Join Date
    Dec 2004
    Location
    Simi Valley, CA
    Posts
    5,077
    Thanks Thom, lol.

    SOLD - these will be spending some quality time in the Eastern Sierra.
    Last edited by 1000-oaks; 05-11-2019 at 07:46 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •