Results 1 to 7 of 7
-
03-19-2019, 09:41 AM #1Registered User
- Join Date
- Nov 2010
- Posts
- 1,426
Bsl adjust on really old look pivot full concept?
Guessing these bindings got to be 15 or 20 yrs old.
Any of you old shop rats know proper way to set bsl / forward pressure on these bindings?
I'm not super familiar with modern pivots but these seem very different anyway.
Screw at back moves heel piece fore and aft but there's no movement of heel piece when stepping in like in a modern binding and i dont see any indicator for correct adjustment.
I'm sure I'm going to die but if I can beat my kid in the dual panel slalom this weekend I'll at least die a happy man.
-
03-19-2019, 09:49 AM #2Registered User
- Join Date
- Jan 2009
- Posts
- 133
I believe the original Axials are set correctly when the forward pressure screw is even with the housing when you click the boot in. That's how I always set mine, anyway.
Sent from my Pixel 2 using TGR Forums mobile appLast edited by goran; 03-19-2019 at 10:34 AM.
-
03-19-2019, 10:05 AM #3Registered User
- Join Date
- Nov 2010
- Posts
- 1,426
-
03-19-2019, 10:26 AM #4I drink it up
- Join Date
- Oct 2002
- Location
- my own little world
- Posts
- 5,874
Yup. They aren’t that old. I’d say 2004-2006? There may be marks on the screw? If not, I think you have it right.
focus.
-
03-19-2019, 11:23 AM #5
-
03-19-2019, 11:29 AM #6
IIRC, those are from the early to mid 00s.
Anyway, screw flush with the top of the hole is correct.
-
03-19-2019, 12:00 PM #7Registered User
- Join Date
- Apr 2004
- Location
- Chamonix
- Posts
- 1,012
04/05 was the last year of Pivots/Axials. Those are likely a few years older.
Bookmarks