GW soled boot w/o walk mode?

[Whiteroom_Guardian]

So I have always enjoyed lange boots and have been on Freetour 130s in low volume for past 2 seasons. Great boot to tour in. Walk mode is meaningless with a power wrap liner anyway though.

They are just too soft though. My latest pair of skis is just a little too stiff for these boots and I can't drive them hard enough.

I need an alpine boot that will fit my foot (apparently pretty low volume, but high arch) with a rubber GW sole and NO walk mode.

I wish I could just have a separate pair of regular din soled alpine boots, but the hike at MLB is sketch and I basically walk out there at least once every time I ski inbounds, so rubber sole is a must.

Which boot?

[oftpiste]

Put grip-walks on your alpine boots. works great.

[Whiteroom_Guardian]

Put grip-walks on your alpine boots. works great.

Wouldn't you have to sand off a ton of material from the bottom of a regular alpine sole in order to do this?

[DGamms]

Don’t next years Atomic Hawx Ultra 130s come with GripWalk soles?

[Judo Chop!]

Wouldn't you have to sand off a ton of material from the bottom of a regular alpine sole in order to do this?

if the Langes fit you feet, just get some RX 130's and these: http://www.lange-boots.com/product/k...p-walk-soles1p

[Whiteroom_Guardian]

if the Langes fit you feet, just get some RX 130's and these: http://www.lange-boots.com/product/k...p-walk-soles1p

Ahhh, did not realize the new RX had that capability. That will probably be the way to go then.

[onenerdykid]

Any Atomic boot that has replaceable toes & heels can go GripWalk. Not sure if the US/Canada has brought in the spare parts to do it yet. Fall 2019 for sure.

[Abol98]

Nordica Promachine GW, Roxa Element 120

[XavierD]

Most Alpine boots with replaceable soles can go Grip walk.

All Tecnica Mach 1s, Nordica Pro Machines, Lange RXs, Atomic Hawx, K2 Recon, Dalbello KR2 and DS

[oftpiste]

Yes. Any boot shop can do it. Grind, not sand. Have had walk soles but on my boots for years, currently have Grip-walks on my Krypton Pros. I wouldn't do it any other way at this point.

Wouldn't you have to sand off a ton of material from the bottom of a regular alpine sole in order to do this?