Wanting to repair some peeling goggle foam. What do you __know__. Some glues make the foam disintegrate. And screw this ridiculous $200+ for goggles ripoff.
Wanting to repair some peeling goggle foam. What do you __know__. Some glues make the foam disintegrate. And screw this ridiculous $200+ for goggles ripoff.
Merde De Glace On the Freak When Ski
>>>200 cm Black Bamboo Sidewalled DPS Lotus 120 : Best Skis Ever <<<
Had good results 're foaming goggles with contact cement. Take care with the application of the glue and cut the foam a red Cunt hair bigger than the location.
I used contact cement as well. Doesn’t take much.
Sent from my iPhone using TGR Forums
Well maybe I'm the faggot America
I'm not a part of a redneck agenda
I used some super glue on an old pair where most of the foam was peeling off. Foam didn't seem to be affected by the glue. Got another year or so out of the goggles.
I have used SeamSeal by McNett for years. Works great, put a small amount on each side and put together. I usually put the goggles on a round object (large bleach bottle) to hold everything in place while it cures. Den
Looks to be re-branded as Seam Grip https://www.rei.com/product/603034/g...ip-seam-sealer
Seam seal, seam grip, aqua seal, shoo goo is ^^ all made by Mcnett, its all liquid urethane in various consistencies so use whatever you got
I also used silicone caulking to glue goggle foam
Lee Lau - xxx-er is the laziest Asian canuck I know
Aqua seal should work also.
Any tips on a foam to use if previous foam is shot?
Is the 3M spray glue able to stick together goggle foam to more goggle foam? Logically, makes sense that it should.
My goal is to cut out some foam from my old goggles and stick it onto my current goggles that aren't providing a solid seal under my nose bridge (and yes I already have low bridge fit goggles).
I havnet tried this in a long time, I used some foam out of an IBM CST selectric sound deadening kit
but any glue that does not eat the foam would work, I seem to remember 70 didnt but 90 did ??
Lee Lau - xxx-er is the laziest Asian canuck I know
3m spray glue is probably the best. We used it all the time to glue higher density foam together to outfit our ww kayaks. It worked well.
Makes me think of a trip to Mustang cat skiing circa 2010. There was someone from this forum there in our cat. He tried using epoxy and ended up with a wicked chemical burn on his forehead..can't think of what his user name was....needless to say it didn't work well....
Bookmarks