Results 1 to 17 of 17
-
01-11-2019, 03:20 PM #1
SALOMON 997 AND 900 - 3 PAIRS $50/50/50
EDIT: Everything is sold.
EDIT: all toes are plastic, heels are metal, all pairs are 6-14 DIN.
Two pairs of 997s in great shape considering their age. The little plastic corners are all still attached, and the AFDs are in good shape. I had them on sollyfits, but all of the original screws will be included. One pair has long screws for use with the plastic plates, but they could be ground, and/or new ones can be purchased from SlideWright. All have skinny brakes, but they're interchangeable with most (all?) pre-STH2 brakes.
$50 each
One pair of banana yellow 900s. I bought these "used" from a mag years ago, but I don't think he ever actually used them. I had them on one pair of skis that I only skied a handful of times, and they've been under my workbench ever since. They have long screws for riser plates, and skinny brakes. (both included).
$50Last edited by pisteoff; 01-14-2019 at 08:47 PM.
-
01-11-2019, 03:24 PM #2
-
01-11-2019, 04:51 PM #3
Are the 900s 14 or 16s?
I don't need them at all, but have never had a sexy yellow pair like that..
So I just might need them
-
01-11-2019, 05:15 PM #4
I will take the yellow star wars 997s if they are 14 din
-
01-11-2019, 05:50 PM #5
SALOMON METAL 997 AND 900 - 3 PAIRS $50/50/50
2nd on the yellow 900s
-
01-11-2019, 06:21 PM #6
They're all 14s.
Another mag got in early on the 997s with a pm, but If he's out, they're going to soups.
The 900s are still up for grabs for JPH, and ACH...
-
01-11-2019, 06:45 PM #7
-
01-11-2019, 07:47 PM #8Banned
- Join Date
- May 2007
- Location
- Sandy, Utah
- Posts
- 14,410
I had those red one. Red is always good.
Sent from my Pixel 2 using TGR Forums mobile app
-
01-11-2019, 08:16 PM #9
Oh man - don’t need, but the Solly hoarder in me is oh so tempted. Must resist.
Sent from my iPhone using Tapatalk
-
01-12-2019, 01:10 AM #10
Just FYI I'm pretty sure those 14 din 997 toes are plastic. The 17 and 20 din toes are metal. Heel cups on 14, 17, and 20 din are all metal.
-
01-12-2019, 11:44 AM #11
I just had a really good look at them, and you're right, the toe wings are plastic. The housing feels like metal, but doesn't pass the tap with a screwdriver test. I've got so much ski shit, I can't even keep it straight anymore... mea culpa on that one.
-
01-12-2019, 12:02 PM #12
Will take either pair of 997s if still available. Thanks.
-
01-12-2019, 01:11 PM #13
depending on how this all sets up, I have an interest in the long screws and riser plates.
Also the 997s, but it appears those are spoken for. If we get to a stage of nobody wanting long screws and plates, I'd like those please.
-
01-12-2019, 02:46 PM #14
Yo dudes I sniped both pairs of 997s. I'm pretty much at hoarding capacity but these looked too pristine to pass up. I'll take an inventory when I get back to CO next week, but will likely have one or two pairs to pass along (same colors, less pristine paint).
Ill-Advised, I requested that plates and long screws be sent your way, since I wouldn't have any use for them aside from adding some extra neon to my longboard day sticks. If you have a regular length set of screws you could send my way I'd be stoked, but no worries if not.
-
01-12-2019, 02:48 PM #15
Ok yeah, that’s a gameplan.
-
01-12-2019, 09:06 PM #16
Pisteoff found a set of regular length screws so I'm all set.
-
01-14-2019, 08:46 PM #17
Everything is sold. Thanks!
Bookmarks