Results 1 to 19 of 19
-
12-16-2018, 06:49 PM #1
ON3P Veneer Jeffrey 114s with Attack 18 Bindings 186cm
Sold
Sooooo. I really, really want to keep these. Been waiting to get on these for two seasons while I wait for my back to heal.
However, planning my trips this winter has made me realize that I indeed cannot bring all five of my ~115mm underfoot skis with me. My travel quiver is going all demo bindings so I can stuff more into the bag
Thus these should go to a good home where they will actually be used as they deserve.
They are in great shape. A little wear, but the edges, topsheets, and bases are very good. One base has a couple very shallow scratches that were filled in with Ptex, not even close to core shots. Yellow storage wax on them currently, which you can see in the picture.
Currently on their second mount. Brand new Tyrolia/4FRNT Attack 18 Bindings. These have a shit ton of metal in them (more than the attack 16), similar amount to Pivot 18s. Super bomber construction. Previous mount was for large Andrenalin frame bindings which has a very long mount pattern, so there is tons of room for another couple mounts too.
Bindings will adjust from 290-327mm bsl. My boot is 295mm and is about .75cm behind the line
Asking $550 plus shipping or free local Colorado Pickup. No trades.
PM me if interested
Last edited by Muggydude; 01-09-2019 at 01:26 AM.
-
12-16-2018, 06:53 PM #2
Dibs, pending more mount info. PM incoming.
-
12-16-2018, 07:01 PM #3
ON3P Veneer Jeffrey 114s with Attack 18 Bindings 186cm
Sorry, updated the post. Bindings adjust from 290-326mm. Current mount has me at 295mm somewhere between 0-.5cm behind the line.
-
12-17-2018, 08:11 AM #4
Passing. Thanks for the mount info.
Free bump for sick skis.
-
12-17-2018, 10:14 AM #5
These look more directional than I thought this model was. Is that just and optical illusion?
-
12-17-2018, 10:30 AM #6
ON3P Veneer Jeffrey 114s with Attack 18 Bindings 186cm
Yes, the tips are tails are very similar. Think the camera angle is misleading. Tips are 8mm wider than tails
-
12-17-2018, 10:47 AM #7
And they are a fairly progressive mount? Again the pic makes the binding position look pretty traditional. The Blister review shows the factory line is -4.6cm from center. So your mount is -.5 from that and a 305 BSL setting would be -1 from the recommedned or -5.6 from center? Sound right?
-
12-17-2018, 10:53 AM #8
Yep you’d be -1.25 actually, I measured last night and I’m -.75
-
12-17-2018, 10:54 AM #9
That veneer is so much nicer than all the usual heinous on3p topsheets.
::.:..::::.::.:.::..::.
-
12-18-2018, 02:48 PM #10
Bump
-
12-20-2018, 05:44 PM #11
Ttt.
Would potentially trade for something similar that’s shorter in length (175-180cm) for my friend
-
12-21-2018, 12:25 AM #12
Trade for a pair of 183 Faction Royales, excellent condition, one mount? Fat freestyle ski circa 2011-2012
Sent from my iPad using TGR Forums
-
12-22-2018, 03:43 PM #13
Not really short enough, sorry
-
12-23-2018, 06:44 PM #14
Ttt
-
12-24-2018, 07:27 AM #15
As a former owner I can vouch for these being a great ski. Very versatile, if I had to have just one ski these would be great. Sure I was looking for a little more length and stiffness, but aren’t we all. These were great for patrol, ski clinics, long arching turns, buttering, deep pow, popping off things, quick turns in tight spaces. I could also hand the off to anyone and make their day, from my intermediate level skier sister, to ripping 16yo cousin, to backseat arm waving friend. Ok the back seat arm waving friend felt worked. They do prefer a centered slightly forward stance, but if I weren’t afflicted with a holy grail ski quest similar to Beetlejuice I might still Be happily skiing these
Sent from my iPad using TGR Forums
-
12-26-2018, 02:06 PM #16
Truly an awesome do-it-all ski ^^^
Getting custom veneer Kartel 116s from ON3P would cost $1050 alone, Bindings are $400 on backcountry right now... sweet setup
-
12-28-2018, 06:53 PM #17
Bump
-
12-31-2018, 02:59 PM #18
Ttt
-
01-03-2019, 11:55 AM #19
pmed
Bookmarks