Results 1 to 6 of 6
-
12-03-2018, 11:04 AM #1Registered User
- Join Date
- Nov 2016
- Posts
- 416
WTB: B&D Shims for Classic Dynafits
Looking for toe shims for the classic Dynafit pattern (Verts, Comforts, etc.). I'm interested in the 4.x and 6.xmm sizes and need multiple pairs. Anyone holding?
-
12-03-2018, 11:17 AM #2
FYI it may be cheaper to just buy a sheet of LDPE and make your own with a dremel.
Last edited by John_B; 12-03-2018 at 11:51 AM.
-
12-03-2018, 12:25 PM #3Registered User
- Join Date
- Jan 2014
- Location
- Gaperville, CO
- Posts
- 5,852
You just looking to save money off of buying them via Skimo.co?
-
12-03-2018, 12:34 PM #4
-
12-03-2018, 01:28 PM #5Registered User
- Join Date
- Nov 2016
- Posts
- 416
Essentially... but depending on how inexpensive they are or are not, I may resort to making my own (probably rough them out on a table saw then clean them up with a router and a tracer bit). I just like the routed out underside of the B&D shims and am hoping to avoid having to go through that much work. Hoping someone has moved onto new clamps and has a set or a couple of sets in a parts bin somewhere.
Sent from my iPhone using TGR Forums
-
12-03-2018, 02:29 PM #6Registered User
- Join Date
- Nov 2010
- Posts
- 1,426
I'm going to be needing some of these soon too.
If you looking at making some, last year I saw a post that someone had made a set with a 3d printer and was looking at either producing them or selling the file to print yourself. I don't know sh#t about materials or 3d printing but my local library has one that anyone can use. Don't know if plan happened and can't find post now - will edit if I come across it again.
Edit - found thread, what i referred to in posts 45 and 50
https://www.tetongravity.com/forums/...d.php?t=309297Last edited by dcpnz; 12-03-2018 at 09:15 PM.
Bookmarks