Results 1 to 25 of 79
-
11-21-2018, 01:11 PM #1Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
FS: Freeride Systems Black Friday Sale 40% off everything !
We are going to have a black Friday sale on our website for mags only. On Friday enjoy a 40% discount on anything that is on there. I will post the code on Thursday night.
CODE IS LIVE: BF IS THE CODE
I cannot promise anything other than we will be shipping for delivery before December 25th.
Our inventory has been ravaged. We are down to the last units in some sizes/colors. There may be situations where you put in an order and we have to back it out and change to something else. This is due to exchanges whereby our online inventory does not always get updated with the exchange. This should be limited to those single digit, last of products. Just be flexible please.
All jackets can be bought through this sale.
Get a made in Colorado technical ski jacket for the holidays !
Please compare our jacket flat measurements below to a jacket you already own and or provide these measurements below to help us confirm. Our jacket runs a size bigger than most other brands So, if you wear a Size Large Patagonia Guide Jacket, Marmot, or Arcteryx Theta, etc type jacket, you most likely will wear a size Medium with us. If you measure a jacket vs the sizes we have provided of laid flat measurements of our jacket and they match something you already own and that fits, you probably have the right size and do not need to provide any measurements unless you want to be totally be safe.
Small
Pit to pit underarm across front 23"
Across back of shoulders seam to seam at widest point 19"
Length of jacket: bottom of neck down back to bottom of jacket 26"
Center of back to end of cuff 35"
Hips area at bottom of jacket before cinching 21"
Small Tall
Pit to pit underarm across front 23"
Across back of shoulders seam to seam at widest point 19"
Length of jacket: bottom of neck down back to bottom of jacket 28"
Center of back to end of cuff 35"
Hips area at bottom of jacket before cinching 21"
Medium
Pit to pit underarm across front 24"
Across back of shoulders seam to seam at widest point 20"
Length of jacket: bottom of neck down back to bottom of jacket 28"
Top of shoulder to end of cuff 26"
Hips area at bottom of jacket before cinching 23"
Medium Tall
Pit to pit underarm across front 24"
Across back of shoulders seam to seam at widest point 20"
Length of jacket: bottom of neck down back to bottom of jacket 30"
Top of shoulder to end of cuff 26"
Hips area at bottom of jacket before cinching 23"
Large
Pit to pit underarm across front 25"
Across back of shoulders seam to seam at widest point 21"
Length of jacket: bottom of neck down back to bottom of jacket 29.5"
Top of shoulder to end of cuff 26.5"
Hips area at bottom of jacket before cinching 25.5"
XL
Pit to pit underarm across front 26"
Across back of shoulders seam to seam at widest point 23.5"
Length of jacket: bottom of neck down back to bottom of jacket 30.5"
Top of shoulder to end of cuff 27.5"
Hips area at bottom of jacket before cinching 27"
A. Pit to Pit
B. Bottom of jacket
C. Top of Shoulder to cuff
D. across back wides part of shoulders
E. bottom of collar down back to bottom of jacket
Here are some of the festive colors (Antero 3 LTE pictured) (hmmm, just noticed the plastic bags in hoods....those will not be included.....lol :
Last edited by MiCol; 11-23-2018 at 01:27 PM.
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-21-2018, 05:30 PM #2
Rad. Have had my Antero II for four-ish years and am a huge fan. I've had several positive experiences where I've ripped my gear and you've been quick to repair it.
-
11-21-2018, 06:17 PM #3Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
^we try to keep our people skiing, if we can fix it, we will do it, thanks for reppin us out there!
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-21-2018, 09:21 PM #4
FS: Freeride Systems Black Friday Sale 40% off everything !
This is awesome, thanks MiCol!
Fear, Doubt, Disbelief, you have to let it all go. Free your mind!
-
11-21-2018, 09:39 PM #5Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
^ welcome, I am so glad I can do this.......funny......I had to ask permission from my own shipping department because they were scared of the consequences....lol.....they like the nice steady eddy order flow....
They about killed me for that blue shirt deal last year 2 fer 69....man they were pissed...lolwww.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-21-2018, 09:46 PM #6
-
11-22-2018, 11:52 AM #7Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
If you will be participating in our sale tomorrow...prepare to step up.... 40% code coming tonight at midnight....
to our Colorado made.......
SAR worn....
Patrol worn....
Colorado Avalanche Information Center worn....
maggot/skier/rider worn....
hell, even big 3 network worn.....
So if you like getting out in this.....
Drop your coin.....
on this maggot made technical outerwear...
.
Don't buy just one.....
cause you never know when it might be gone.....
Stay out of trouble this season.....
and have some fun....
you can always work from the field......
Last edited by MiCol; 11-22-2018 at 12:56 PM.
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 12:17 PM #8
Any chance you found a large Bross on the floor of the loading dock?
-
11-22-2018, 12:36 PM #9Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
i have one.... lol, it is with me and has the tags, i have been traveling with it trying to decide whether to keep for me, or let it go....i have not figured that out yet....trying to figure out if my layer quiver has it covered....or to keep for nostalgic reasons. ......we dont have the fabric anymore....this is the last one,.....unless a big fabric order made...so not sure yet, but know that i have it with me.....so it is safe...if i let it go it will be to you....
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 01:01 PM #10
Great promo for mags. Thanks
After a medium tall. Do I see correctly only A2 in red for that size?
-
11-22-2018, 01:01 PM #11
Clap. Happy Thanksgiving Mike!
-
11-22-2018, 01:31 PM #12Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 01:31 PM #13Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 01:45 PM #14Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
hey G, is it only the 3.0 you are after or is 2.0 on the table?
reason is, i am going to make a very small batch run of 2.0 R1 hoodies....fabric is being prepared to cut now, i will be announcing in another thread soon. however, i want to see if you were after the heavier dwr 3.0 (better stand alone) version or 2.0 (better layering) one
what was your intended use?www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 01:54 PM #15
-
11-22-2018, 02:07 PM #16Registered User
- Join Date
- Oct 2008
- Location
- Orygun
- Posts
- 593
If there was a mag priced 2.0 R1 hoodie I'd be interested.
-
11-22-2018, 02:10 PM #17
FRS stuff at a heavy discount is the best deal out there.
I have the Bross 2. I'd buy a backup if they came around again.
-
11-22-2018, 02:12 PM #18Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 02:14 PM #19Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 03:36 PM #20
-
11-22-2018, 04:03 PM #21
Excellent hype post above. Just want to add that beyond all the professional burliness, FRS also knows how to create a great snuggle piece. Appreciate you!
-
11-22-2018, 05:11 PM #22Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 06:11 PM #23
-
11-22-2018, 06:20 PM #24Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
Pm’d
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
-
11-22-2018, 06:21 PM #25Jacket Cobbler
- Join Date
- Nov 2007
- Location
- 8,290'
- Posts
- 5,358
www.freeridesystems.com
ski & ride jackets made in colorado
maggot discount code TGR20
ok we'll come up with a solution by then makers....
Bookmarks