Results 1 to 17 of 17
  1. #1
    Join Date
    Sep 2010
    Location
    Salt Lake City
    Posts
    222

    FS: Bishop Bomber / HammerHead swap plates. Make an offer!

    I'd like to re-home a pair of Bishop Bomber / HammerHead swap plates. I used these several years ago to swap between Bombers at the resort and HammerHeads for touring. These are Bishop Bomber manufactured plates that also work with the 22Designs 6 hole pattern. All the hardware is included. You can mount with a 4 / 6/ 8 hole pattern. Stack height is 6mm (slightly less than a 1/4 inch).

    Make an offer and cover shipping and I'll get them out to you. I no longer Tele so they need a new home.

    Thanks!

    Click image for larger version. 

Name:	IMG_1627.jpg 
Views:	37 
Size:	1.35 MB 
ID:	253671

    Click image for larger version. 

Name:	IMG_1628.jpg 
Views:	35 
Size:	1.37 MB 
ID:	253672

    Click image for larger version. 

Name:	IMG_1629.jpg 
Views:	34 
Size:	1.27 MB 
ID:	253673
    Last edited by NShultz; 11-02-2018 at 06:20 PM.

  2. #2
    Join Date
    Apr 2016
    Location
    Top o pahto
    Posts
    124
    I think Doremite was talking about going down this road...I will page him to the white courtesy phone.

  3. #3
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    3,097

    FS: Bishop Bomber / HammerHead swap plates. Make an offer!

    Yes. Here. To be clear these work for AXLs?These homemade?
    Uno mas

  4. #4
    Join Date
    Apr 2016
    Location
    Top o pahto
    Posts
    124
    AFAIK, all 22designs bindings share the same six hole toe mounting pattern.

  5. #5
    Join Date
    Sep 2010
    Location
    Salt Lake City
    Posts
    222
    ^^^ As River59 said, yes these should work with all 22 Designs Tele bindings. I just verified it on their website that they all have the same mounting pattern. And to be clear I was using HammerHead 22Designs bindings and BishipBombers with these plates. Interchanging a couple times between the two. Mostly I used HammerHeads.
    These are Bishop Bomber branded and very similar to the current 22Designs shift plate. Link below:

    http://www.twentytwodesigns.com/Shift-Plates_p_117.html
    Last edited by NShultz; 11-02-2018 at 06:21 PM. Reason: corrected info.

  6. #6
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    3,097

    FS: Bishop Bomber / HammerHead swap plates. Make an offer!

    Figured on the 22 6 hole pattern. Thanks. Just find it odd either of those companies would make a plate w both the 6 hole and standard 4 hole.

    That a 4 screw mount of plate to ski?
    Uno mas

  7. #7
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    3,097
    PM replied to. I am going to pass as I prefer a 6 hole toe mount.
    Uno mas

  8. #8
    Join Date
    Sep 2010
    Location
    Salt Lake City
    Posts
    222
    Maybe someone that knows mounting tele bindings better than I can chime in... Are these a 4 hole or 6 hole mount? I used them with Hippy Stinks that were factory inserted and don't 100% recall. It's been several years since I Tele'd. I looks to me like you could mount these with a 6 hole pattern? Anyone know from looking at the pics? Thanks!

  9. #9
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    3,097

    FS: Bishop Bomber / HammerHead swap plates. Make an offer!

    These appear to be bishop built. Similar to their lift plates you can mount 4, 6, or 8 screws in the base plate. I used to go belt and suspenders and mount 8. Likely overkill.
    They also have more rise than the current 22D shifts which gives me pause but that is totally personal preference and no knock on the design.
    Uno mas

  10. #10
    Join Date
    Sep 2010
    Location
    Salt Lake City
    Posts
    222
    Thanks for the all the helpful feedback and identification. These plates are 6mm thick which is the same as the current production 22Designs plates that are 1/4 inch. Same, same stack height.

  11. #11
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    3,097
    Sorry that makes total sense given you need space for the inserts.
    Uno mas

  12. #12
    Join Date
    Sep 2010
    Location
    Salt Lake City
    Posts
    222
    No worries! Thanks for all of your help ironing out the details of these plates. You want em? Seems like they fit all the criteria you were looking for.

  13. #13
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    3,097
    Just shot you a PM. Going to pass as I was hoping to drop them into an existing AXL mount and these would require new holes. Thanks again for all the quick replies.
    Uno mas

  14. #14
    Join Date
    Sep 2010
    Location
    Salt Lake City
    Posts
    222
    Sold pending payment. Thanks all.

  15. #15
    Join Date
    Dec 2010
    Location
    Haverhill, MA
    Posts
    50
    I would like these if the deal fell through. Let me know!

    Sent from my SM-G960U using TGR Forums mobile app

  16. #16
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    3,097
    I may have an extra bomber base plate around if that helps someone. Just for bombers tho. PM me.
    Uno mas

  17. #17
    Join Date
    Sep 2010
    Location
    Salt Lake City
    Posts
    222
    I ship em out today. Sorry!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •