Results 1 to 10 of 10
-
10-03-2018, 10:35 AM #1
ISO: Front IS to post mount adapter
Hey folks,
Anyone have an IS to post mount adapter laying around in their parts bin? Recently picked up a post mount fork. Have Magura Marta caliper with 160 rotors.
Thanks,
Dave
-
10-03-2018, 10:45 AM #2
I'm sure I do. Let check the garage.
fork: IS
caliper: PM
correct?
-
10-03-2018, 11:34 AM #3
-
10-03-2018, 11:43 AM #4
-
10-03-2018, 11:59 AM #5
-
10-03-2018, 01:36 PM #6
Not sure such a thing exists, at least I've never seen it. Honestly not sure it's even possible to go that way, no room. Sorry, no help here.
There's nothing better than sliding down snow, and flying through the air
-
10-05-2018, 09:40 AM #7
ISO: Front IS to post mount adapter
PS fork to IS caliper. 160 is going to be tricky. They do exist, just not common or cheap.
https://clee-cycles.co.uk/P1043/product
-
10-05-2018, 12:35 PM #8Registered User
- Join Date
- Mar 2011
- Location
- LA
- Posts
- 293
OK, I'll try next. Will check the bin this evening. Was running a Louise FR on a Van36 until recently, and I still have that adapter.
- Joe
-
10-05-2018, 07:51 PM #9Registered User
- Join Date
- Mar 2011
- Location
- LA
- Posts
- 293
So what you want, if not the Clee, is a Magura #3. That's what I have, but I need to see if I can use it to run the Louise FRs on my SS before I let it go, and I may not get to that chore for a while. They're no longer made, but if you can't find one on ebay, you could try this: https://www.ebay.com/itm/KCNC-Rotor-.../130867284694? Both would likely bump you up a rotor size.
-
10-09-2018, 07:26 AM #10
Thanks All,
I ended up locating one on-line from Clee-Cycles. Should have it this week. Definitely hard to come by.
Dave
Bookmarks