FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

[waveshello]

Prices shipped CONUS, will ship elsewhere if we can work something out.

$140 -- FKS 155 w/ Alpine AFDs, all screws included, your choice of new 130mm brakes or old 75mm brakes bent to fit a 90mm ski. Whichever brake/turntable doesn't sell with the binders will be available separately.




$50 -- FKS 155 orphan heels only


Or $200 for all of it--all the pivot pieces you need for a CAST setup on two pairs of skis.






Sent from my SM-G965U using Tapatalk

[altacoup]

I’ll take those heel pieces. PM incoming

[waveshello]

Complete FKS sold, heels sold!

130mm brakes/turn tables remaining, $50 shipped to you. They are in good shape--only have ~10 days on them.

[jbrine]

Anybody know if these are indemnified for shops to mount? Have a local guy asking before he picks up:

[rudy]

Anyone interested in a pair of turntables w 130mm brakes (have) to swap for 115mm brakes only (need)?

[F#*k you cat]

Anyone hoarding snowbird edition pivots???

Interested in a pair.

Sent from my Pixel 6 using Tapatalk

[jbrine]

Have a pair on skis currently. Like them but open to options.

Would swap them if you have options with GW compatible toes.


Sent from my iPhone using Tapatalk

[DigSki]

Anyone hoarding snowbird edition pivots???

Interested in a pair.

Sent from my Pixel 6 using Tapatalk

I have a pair. Dildos are on skis so some options:
- if you have dildos to spare I'd do a swap + a little cash for the toes.
- if the trade for GW compatible with jbrine doesn't work, I'll get in line behind them for that swap.
- I'll just sell them to you if someone else in this thread pops up with some dildos for sale, or full heel setups with 95mm brakes

[EWG]

I need a single Look SPX or Axial 3 Binding - or even just the heel. I know it's not a pivot, but anybody holding?

[S.B.]

Looking for Pivot 14/15/18, GW compatible (or can be made compatible with new AFD), 95mm brakes, any color other than forza. Will buy, or have STH2s and 2x Attack2s to trade

Sent from my SM-G960U using TGR Forums mobile app

[skuff]

I'm sure it's in this thread somewhere, but there's a lot to sift through...

Are grip walk soles (on alpine boots) compatible with the older, AFD race toes? Or is the plan to order replacement grip walk AFDs and modify them to accommodate the older style toe base (pedestal?)

Thinking about getting new Full Tilt boots with grip walk soles to replace my older Full Tilt boots without grip walk soles, and I have 1 pair of skis with the alpine AFD I'd like to use with the new boots.

edit: Here's the answer to my question if anyone else is curious
https://www.tetongravity.com/forums/...-Vs-WTR-Pivots

[mr walker]

skuff check your PMs, thanks!

[JWoody]

I have 2 toe pieces and a heel for FKS 140 available. Been sitting around a while and I haven't done anything with them after blowing the missing heel off and never finding it. Anyone in need? I think the remaining brake is a 115? Had them on Bibbys.

[JWoody]

The heel, I think, is spoken for by Vitamin 1. I didn't specify in the original post, I don't want any cash for these so if anybody needs toe pieces just pay the shipping and they will be out the door.

[JWoody]

All spoken for

[rfconroy]

Probably should post in tech talk, but figured: "eh what the hell, these jabronis would know"

Anyone ever paint their Pivot 14s before? Does the plastic din window on the toes pop out and back in easily?
I tried giving it a wee bit of pressure, but was worried I was going to break it so I backed off.

[caulfield]

searching for 95mm brake/turntable assembly, or heels w/ 95mm...or full bindings with GW toes

[phatty]

Anyone ever replaced Attack bindings with Pivot at same BSL? Was looking at doing that but want to avoid hole conflicts. Yes, I know I can download the templates but figured I would ask the Pivot experts first. Will have a few pairs hitting the market here soon.

[caulfield]

Anyone ever replaced Attack bindings with Pivot at same BSL? Was looking at doing that but want to avoid hole conflicts. Yes, I know I can download the templates but figured I would ask the Pivot experts first. Will have a few pairs hitting the market here soon.

rear pair of toe holes are pretty close, but not overlapping. I've done the swap in both directions with bad bbq skewers and good epoxy, still alive. In skis with quality cores though. I think the pivot pattern is inside the attack pattern, so moving it slightly forward just gives you 4 conflicts instead of 2

[nonamenoneed]

Searching for a pair of white pivot 14s,15s, or 18s
95mm brake width preferably.
Located in Jackson but more than willing to pay shipping and then some

[ASP]

Searching for a complete set of 15s or 18s. Any color but forza...

[rfconroy]

Probably should post in tech talk, but figured: "eh what the hell, these jabronis would know"

Anyone ever paint their Pivot 14s before? Does the plastic din window on the toes pop out and back in easily?
I tried giving it a wee bit of pressure, but was worried I was going to break it so I backed off.

Bumping this for knowledgeable mags before I kick it over to techtalk

[S.B.]

Bumping this for knowledgeable mags before I kick it over to techtalk

There was a big how to thread about this last year on newschoolers, but I think they were painting pivot 18s. I'll try to find it

Sent from my SM-G960U using TGR Forums mobile app

[jackattack]

Anyone ever replaced Attack bindings with Pivot at same BSL? Was looking at doing that but want to avoid hole conflicts. Yes, I know I can download the templates but figured I would ask the Pivot experts first. Will have a few pairs hitting the market here soon.

Download this file and hide/show layers in a pdf viewer to compare mount patterns. So easy.

https://drive.google.com/file/d/1Zc7...usp=share_link

[S.B.]

Bumping this for knowledgeable mags before I kick it over to techtalk

https://www.newschoolers.com/forum/t...om-Look-Pivots

https://www.newschoolers.com/forum/t...-skis-tutorial

Sent from my SM-G960U using TGR Forums mobile app