Fence Installation Question
Collapse
X
-
Here's a fence I built a few years ago. Eastern white cedar left unfinished. Stainless steel screws except to hold the vertical slats in place. They have a cleat on each side and I just tacked in a stainless brad to hold them vertical. Screws wouldn't work on the 1x1 pieces without splitting. I was concerned about the large spacing not being private enough but it works great.
Sent from my SM-G950U using TGR Forums mobile appComment
-
-
Comment
-
Once built a 6โ fence with my father in our side yard when I was 16. Cedar posts and square topped pickets with pyramidal tops to finish the posts which extended a couple inches above the pickets. Looked really nice.
We pulled a permit and followed the code. Apparently there was some kind of waiting period we failed to understand. The city came back after we were finished and said the fence could not exceed 48โ.
My dad was so furious when he got the letter from the city he said โcome with me...โ. We snapped a level chalk line at 48โ and he walked the length of the fence with a circular saw and just cut everything off square. Project complete.
One of my favorite memories of my dad :-)
Sometimes the hardest part about building a fence is neither the fasteners or the wood, but the neighbors.Comment
-
Comment
-
Comment
-
Comment