Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2016
    Location
    Idaho
    Posts
    495

    Skin Length Concerns...

    Looking to buy a set of new skins off a guy for cheap

    Black Diamond Ascension Nylon STS 140 MM

    There is no length indicated on the box or anything but the guy says the "nylon" part is 6ft long = 183" cm

    My skis are 187cm

    I've never skinned and am wondering if they're too short for my skis?

    Seems like after the tail clip and the top clip, slightly moved down the ski, i should be fine for length?

    Am I right to assume they'll work?

    Thanks

  2. #2
    Join Date
    Dec 2007
    Location
    T-town, CO. USA
    Posts
    2,098
    They'll work fine. In fact, you'll probably still end up trimming the length when you install them since "skin length" is always several cm's shorter than true ski length.
    Leave No Turn Unstoned!

  3. #3
    Join Date
    Mar 2016
    Location
    Idaho
    Posts
    495
    Supposedly they run pretty true to size like maybe 186cm but thanks for the heads up!

  4. #4
    Join Date
    Dec 2007
    Location
    T-town, CO. USA
    Posts
    2,098
    Quote Originally Posted by ALFONSO618 View Post
    Supposedly they run pretty true to size like maybe 186cm but thanks for the heads up!
    Remember, the tail clip and tip loop fixtures end up putting the skin itself well back from both ends of the ski. Skins don't run "tip-to-tail."
    Leave No Turn Unstoned!

  5. #5
    Join Date
    Mar 2016
    Location
    Idaho
    Posts
    495
    Quote Originally Posted by DropCliffsNotBombs View Post
    Remember, the tail clip and tip loop fixtures end up putting the skin itself well back from both ends of the ski. Skins don't run "tip-to-tail."
    Thanks! I figured I'd be ok but I thought i would ask...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •