Results 1 to 3 of 3
Thread: BD 01 mount pattern?
-
04-12-2018, 06:12 AM #1User
- Join Date
- Oct 2003
- Location
- Ogden
- Posts
- 9,158
BD 01 mount pattern?
I'm trying to decide if a pair of used skis that have been mounted once, on the line, for a 315 bsl with a BD01, would interfere with an alpine mount. I would be mounting for a 305ish bsl on the line with either a Salomon s912ti or a Rossi Axial 2 140.
It looks like the BD01 had four holes for the toe and two for the heel? From internet images, it appears that the toe holes are narrow and spread far from front to back. I figured someone here with a good memory and good tech skills may be able to spit ball this for me.
-
04-12-2018, 03:23 PM #2User
- Join Date
- Oct 2003
- Location
- Ogden
- Posts
- 9,158
Never mind, I was too slow! They were the elusive 2014 Cochise for cheap and I missed it.
-
04-13-2018, 09:09 AM #3
FYI: For the most part, “standard” tele mounts, such as the O1, don’t interfere with alpine mounts. The heel holes are in the center of the ski so the heel is not an issue. The toe holes are quite narrow and widely spaced compared to most alpine patterns.
Bookmarks