Results 101 to 125 of 526
Thread: Kingpin charging
-
01-26-2018, 10:37 PM #101Registered User
- Join Date
- Oct 2005
- Location
- Truckee
- Posts
- 1,041
I never had any problems pre-releasing with my marker Kingpin set on din 11. Re Frozen chunder at the resort, 10 to 15 foot Hucks and balls out powder skiing all in ski mode. But I just sold them to get a pair of the Salomon mtn bindings so I could lighten my setup. Hopefully those hold just as well. Reviews sound promising
Sent from my VS987 using TGR Forums mobile app
-
01-27-2018, 10:14 AM #102Registered User
- Join Date
- Feb 2016
- Location
- Rossland
- Posts
- 136
Ive put about 25 days on my Kingpins mounted on Billy Goats, about 15 days of solid inbounds shredding in all conditions. I've prereleased twice from the heel so far in slightly forward landings (like Judo Chop!) but bumped the DIN up to 10 and havent had another prerelease yet. I weigh around 165 but ski hard and jump off all kinds of stuff into questionable snow. The Kingpins haven't slowed me down yet but I don't see them lasting nearly as long as my all metal binders.
-
01-27-2018, 10:28 AM #103
Kingpin charging
Day 5 on this pair. Glad the heel popped off on the skin track and not the chute right before. Worm gear and screw are somewhere West of Sadzele in Gudauri, Georgia.
-
01-27-2018, 11:24 AM #104
Wow that sucks.
Marker makes cheap plastic bullshit*t. Who knew?
Also, for interested parties, their warranty Dept is complete garbage. My shop can't even get a hold of them to get an RMA number. Like, won't pick up the phone. Called to grease the wheels, woman literally refused to sell me things because I didn't have "an account". Uh, shut up and take my money?
-
01-27-2018, 11:34 AM #105
Well phooey. I’ve been having great luck so far, but these reports are troubling. I’m 5’11”, 200, no prerelease or any other warning signs. I experimentally got a used pair of tectons, but was ready to pass them on for a few reasons.....now I have my doubts. Damnit!
Sent from my iPhone using TGR ForumsGravity always wins...
-
01-27-2018, 01:06 PM #106
-
01-27-2018, 07:01 PM #107
-
01-29-2018, 02:09 PM #108
-
01-29-2018, 05:28 PM #109
Just skied my new KP setup for the first time this weekend. Honestly felt no different than any alpine binding I've been on. I guess being light helps here..
-
01-30-2018, 05:45 PM #110
Same shit is happening to me right now. Broke a toe pin two weeks ago (posted the story in another "tech binding broken toe pin" thread); luckily it happened inbound (and it happened on a groomed run on the way to the chairlift - not while landing a 40 feet cliff).
If I would have been in my usual backcountry spot I would have died trying to walk back to the car.
Seems that it's mandatory to go through a shop to get a Marker product warrantied; yet shops can't reach them.
In sum, their warranty department is on par with their product: cheap and unreliable. This is my last Marker binding. Never again. Fuck these assholes.
/rant
-
01-30-2018, 09:59 PM #111Registered User
- Join Date
- Jan 2009
- Location
- The Granite State
- Posts
- 349
Anyone having issues with the heel piece icing in place and not sliding? I’m on a warranty replacement pair due to heel freezing and snapping the carbon fiber arm (shouldn’t have forced it).
Both Heels on new pair iced up tonight in 15 degree weather on lap #3. (Second day using them). Went to the car and defrosted them.
Anyone have a remedy to get the heel to slide if I’m not able to defrost or better preventative maintenance to avoid the issue all together?
Sent from my iPhone using TGR Forums
-
01-30-2018, 10:01 PM #112Rod9301
- Join Date
- Jan 2009
- Location
- Squaw valley
- Posts
- 4,667
Try lubing the parts with a low temp grease that doesn't damage plastic.
Sent from my Moto G (5) Plus using TGR Forums mobile app
-
02-01-2018, 05:29 PM #113
Silicone spray probably is good too, and easy to apply. [And won't attract a lot of dirt etc.]
I'd probably prefer silicone, personally.
[Well, I'd actually prefer which works better and lasts longest - but I have no idea which meets those criteria.]
-
02-01-2018, 07:22 PM #114Registered User
- Join Date
- Jan 2006
- Location
- VT
- Posts
- 201
Don't know if it's bad for the material, but I use none stick cooking spray, figured how bad can it be if you can eat it, seems to work. Year 2 on KP no visible signs of damage. Used it on Dukes for many years. I also carry a small stiff bristle brush with me for cleanup if things look iced.
Sent from my XT1254 using TGR Forums mobile app
-
02-01-2018, 09:01 PM #115
I've broken two toe pins in a week on a roughly 1 year old binding. While getting the first toe piece warrantied, discovered both heel pieces had cracks along the female part of the rail system. This week broke a toe pin in the non warrantied heel piece while on a hut trip. That's all 4 corners of the binding system that lasted under a year.
-
02-01-2018, 10:49 PM #116Registered User
- Join Date
- Oct 2008
- Posts
- 369
A little unnerving to see the pin issue.
I have about 40 days soli patrolling on mine with no issues. I'm 190lbs and always have a heavy pack on. No pre release issues and feel much more comfortable hard skiing kingpins than dynafits.
Only issue so far is the heels really don't like to click if you have any snow on your boots.
-
02-01-2018, 11:47 PM #117
They need to get those pins 100% right. Someone’s going to get hurt. All the years on dynafit I just haven’t seen that issue . Kingpins overall probably get put thru the ringer more on average but I’ve seen some stooopid shit on dynafits and they just keep going and going
-
02-02-2018, 10:28 AM #118
I've probably put 25 days on a pair, including two freeride comps (mellow ones) and lots of jumps to all sorts of landings. I love how they ski, no issues with durability yet, but I was at about 165lb last year and about 145lb this year, so not heavy.
I don't really want to wait until they break though.
I've got kingpins on old heavy hojis and atk/dyna combo on new light hojis.
The last few years I was day tripping to the Arlberg where a quick tour gets the good, so I skied pin bindings almost exclusively for years. Now I've got a lift out of town and have a more "inbounds" type ski area. I think I'll just go to alpine bindings on heavy skis. Then I've got a light binding for touring.
Or I just wait until next year and get the Shift...
-
02-02-2018, 11:06 AM #119
What's a post without some stoke, last sunday:
-
02-02-2018, 11:08 AM #120
That is skiing aggressively on kingpins! Stoneground for sure he win!
Sent from my iPhone using TGR ForumsI rip the groomed on tele gear
-
02-02-2018, 11:38 AM #121
It's worth noting the very smooth landings (that's a compliment) so not putting too much stress on the bindings regardless of weight. Which is also why the whole "a bunch of pro skiers spent X days on these bindings and had no problems" always makes me skeptical compared to being tested by the general population.
-
02-02-2018, 11:42 AM #122
-
02-02-2018, 01:06 PM #123
-
02-04-2018, 11:08 PM #124Registered User
- Join Date
- Feb 2016
- Location
- Rossland
- Posts
- 136
My blown knees are slowing me down much more than my Kingpins.
-
02-05-2018, 11:45 AM #125Registered User
- Join Date
- Feb 2017
- Posts
- 71
Bookmarks