gear rumors 18/19

[grinch]

Brakes extra? 245g?

Wonder what the ramp angle is and if they’ll be available in 2018 fall. And if the 2 spring toe is a POS or if it’s kingpin decent.

[NorCalNomad]

I would’ve used that d fit booster today. Cat skiing terrain off the hill is a 10-20 minute skin traverse. Doesn’t gain much vert. Lap in lap out

Actually think that's the most interesting/ innovative thing in that catalogue...but once shift comes out.... Also the P49 ridiculous ski run binding, not for everyone but interesting to see how far the ski runners take weight reduction.

[N1CK.]

Looks like new color for pivots?

Attachment 221155

Attachment 221172

[grinch]

Actually think that's the most interesting/ innovative thing in that catalogue...but once shift comes out.... Also the P49 ridiculous ski run binding, not for everyone but interesting to see how far the ski runners take weight reduction.

Ya it seems like that rare product that is engineered for old standards and to be combined with another companies products. Don’t often see that from a relatively big market brand. Pic shows it with a trad Solomon toe piece. I’m guessing that’s the hole pattern width, to fit with a solly toe.

[reckless toboggan]

Looks like new color for pivots?

Attachment 221155

New old colour. Pretty sure those were around in mid 80s or early 90s.

[NorCalNomad]

New old colour. Pretty sure those were around in mid 80s or early 90s.

Pair those up with those retro graphic'd k2 catamaran or marksman for your dose of 80's steeze

[mntlion]

Pair those up with those retro graphic'd k2 catamaran or marksman for your dose of 80's steeze

like this???

[grinch]

Mohawk requirement

[NorCalNomad]

like this???

Those would work as well, but I guess I was thinking about this years.

[sf]

New Fischer Ranger Free announced today. Looks to be pretty good competition for the Atomic XTD.

https://www.fischersports.com/us_en/...ts/ranger-free

Sent from my Pixel 2 XL using TGR Forums mobile app

Looks very interesting. They had a magazine-invite-demo-thing a month a go. Norwegian magazine Friflyt was stoked. If this is as good as they claim it could replace my Cochise/Mtn Lab combo, and make me buy a 1000g-boot for longer tours.

https://www.friflyt.no/Ski/Fischers-stive-topptursko
https://pfpitches.com/fischer-sports/ranger-free/

For some reason I feel that the cuff/liner looks a bit taller than Cochise etc......which would be welcome for me.

[kootenayskier]

Having to reach down and pivot the entire heel piece in order to change between heel raiser heights is a deal breaker for me, given that there are multiple otherwise functionally equivalent alternatives that don’t require such a significant inconvenience many times per day.

[Skidog]

Mohawk requirement

And colored zinc oxide for your nose. Toss in some old Oakley's and a headband and you're in 80s ski heaven

Sent from my XT1650 using TGR Forums mobile app

[lordf]

Pair those up with those retro graphic'd k2 catamaran or marksman for your dose of 80's steeze

I have a pair of Day Glow Sploders earmarked for these...

[grinch]

Having to reach down and pivot the entire heel piece in order to change between heel raiser heights is a deal breaker for me, given that there are multiple otherwise functionally equivalent alternatives that don’t require such a significant inconvenience many times per day.

May still be a deal breaker but it was just the mid height riser that required turning the heel. Seemed like the mid height was minimal(5degree?) difference from flat and he almost mentioned it as an afterthought. Flat and the 3rd level riser didn’t require turning the heel. Maybe the 3rd is too high for regular use though. Idk

And colored zinc oxide for your nose. Toss in some old Oakley's and a headband and you're in 80s ski heaven

Sent from my XT1650 using TGR Forums mobile app

Those were the days, under the snik parasol, honey bronzed and very desirable

[skiitsbetter]

Scarpa Alien RS with a carbon cuff (Alien RS 1.0?)?

[::: :::]

This carefully concealed death machine has been spotted on Hood





After he goes public, I wonder if it will be allowed at Alta

[Skidog]

May still be a deal breaker but it was just the mid height riser that required turning the heel. Seemed like the mid height was minimal(5degree?) difference from flat and he almost mentioned it as an afterthought. Flat and the 3rd level riser didn’t require turning the heel. Maybe the 3rd is too high for regular use though. Idk



Those were the days, under the snik parasol, honey bronzed and very desirable

#daffys

Sent from my XT1650 using TGR Forums mobile app

[Skidog]

This carefully concealed death machine has been spotted on Hood





After he goes public, I wonder if it will be allowed at Alta

Wow.... interesting I guess

Sent from my XT1650 using TGR Forums mobile app

[trogdortheburninator]

Scarpa Alien RS with a carbon cuff (Alien RS 1.0?)?

New A1.0 (not RS). Takes some nice design features from the RS, the A3.0 and the current A1.0. Should be a great race boot.

[stuckathuntermtn]

Is that Fischer boot DIN compatible? Vacuum Fit? Still made in Italy?

[adrenalated]

Is that Fischer boot DIN compatible? Vacuum Fit? Still made in Italy?

The video on their site shows it clicking into a MBS13 alpine binding, which I think would mean DIN compatible. No idea on the other stuff though.

[NorCalNomad]

This carefully concealed death machine has been spotted on Hood

After he goes public, I wonder if it will be allowed at Alta

LOLOLOL

I wonder if this is one of the designers from Ghost Works, they design Hoka's shoes among many other, as clued from that sticker.

[kootenayskier]

May still be a deal breaker but it was just the mid height riser that required turning the heel. Seemed like the mid height was minimal(5degree?) difference from flat and he almost mentioned it as an afterthought. Flat and the 3rd level riser didn’t require turning the heel. Maybe the 3rd is too high for regular use though. Idk



Those were the days, under the snik parasol, honey bronzed and very desirable

5 degrees without rotating the heel piece, 0 and 9 degrees with 90 degree rotation of the heel piece. Seems you’d either make do with just the 5 degree setting, or 0 and 9. Going back and forth would be annoying.

[gregL]

5 degrees without rotating the heel piece, 0 and 9 degrees with 90 degree rotation of the heel piece.

Missing one essential data point - with what BSL boot?

[dcpnz]

Is that Fischer boot DIN compatible? Vacuum Fit? Still made in Italy?

Fischer website says and shows Vibram Gripwalk soles.