PRAXIS JUNKIES WHAT MODELS DO YOU OWN

[tharmor]

^196cm protest look yummy


Sent from my iPhone using TGR Forums

[Norseman]

For sale:

Rx 189cm, flex 4, heavy core + carbon

2 mounts for pivot @ 316mm bsl, one at the dot and the other 2cm back

edges and bases 9/10

putting here for the fanbois so the jongs don't swoop GS

$200 for cheese factor

[skibrd]

For sale:

Rx 189cm, flex 4, heavy core + carbon

2 mounts for pivot @ 316mm bsl, one at the dot and the other 2cm back

edges and bases 9/10

putting here for the fanbois so the jongs don't swoop GS

$200 for cheese factor

...

...but I can’t get Pivots in at 306...

Shit... I’d have to fill the holes with dowels and sand them down, I’d ruin these. I PMd Norseman to get them, but I’m going to have to pass...

[galibier_numero_un]

...

...but I can’t get Pivots in at 306...

Shit... I’d have to fill the holes with dowels and sand them down, I’d ruin these. I PMd Norseman to get them, but I’m going to have to pass...

You'd be fine. Just look at some of Splat's Swiss Cheese projects.

... Thom

[Norseman]

...

...but I can’t get Pivots in at 306...

Shit... I’d have to fill the holes with dowels and sand them down, I’d ruin these. I PMd Norseman to get them, but I’m going to have to pass...

Your box is full, M.

[eskido]

For sale:

Rx 189cm, flex 4, heavy core + carbon

2 mounts for pivot @ 316mm bsl, one at the dot and the other 2cm back

edges and bases 9/10

putting here for the fanbois so the jongs don't swoop GS

$200 for cheese factor

Good lord that build is perfection for that ski! Thinking about it more, I don’t think I could fit a 326 Pivot in there either? Steal of a deal! Some mag get some!!!

[Sinecure]

I've probably posted this before. But what the hell.

Santa Skis on Praxis.

[Sinecure]

Santa also has one of the first pair of SND's that Keith ever made. As you can tell from the age of the snowboarder, this is an older pic of Santa and his elves.

[skibrd]

Your box is full, M.

Cleared a bunch of messages out


Sent from my iPhone using TGR Forums

[ASP]

Anyone trying to sell Q’s, Concepts, RX’s or GPOs?

[3PinGrin]

Anyone trying to sell Q’s, Concepts, RX’s or GPOs?

You keep fishing all over the place for skis. But, if you are interested in Praxis models, good deals going on now (as I pointed out in another thread sometime back)

[SUPERIOR]

I have some 194cm Praxis Freerides with 1.5 mounts in excellent condition. Prism top sheet. Trying to decide if I’m going to mount them up and charge some runs at Big Sky with them ... they are BIG.

If anyone is looking for this exact ski, send me a PM... I may consider selling.

I also have 187 Protests I’m excited to ski this year. Considering putting Beast 16s on them for a BBowl slackcountry touring rig.

Finally, I sold my 187 carbon GPOs last year, and it was a heartbreaker, but I needed cash, plus they were mounted with Vipecs and had little room for remounts. Would enjoy a new set of GPOs to put a different tech binder on. Best pow touring rig!

[Norseman]

For sale:

Rx 189cm, flex 4, heavy core + carbon

2 mounts for pivot @ 316mm bsl, one at the dot and the other 2cm back

edges and bases 9/10

putting here for the fanbois so the jongs don't swoop GS

$200 for cheese factor

Anyone trying to sell Q’s, Concepts, RX’s or GPOs?

...

[TrueNorth]

184 Piste Jib and 190 Powderboards for sale over in gear swap
https://www.tetongravity.com/forums/...98-Praxis-ON3P

[ASP]

Any idea if it would be possible to squeeze in any mount point around a 320 on those RX's near the recommended line? Not picky on bindings.... I admittedly know very little about binding patterns/etc... Looking for some guidance.

[Norseman]

Any idea if it would be possible to squeeze in any mount point around a 320 on those RX's near the recommended line? Not picky on bindings.... I admittedly know very little about binding patterns/etc... Looking for some guidance.

Pretty sure it'd be easy. Maybe use a set of PX 12/14/15/18, which reuses the toe holes and has a much wider heel pattern.

I have some PX14 that I need to sell anyway. I'll lay out the mount tonight and get a more concrete answer.

[ASP]

Pretty sure it'd be easy. Maybe use a set of PX 12/14/15/18, which reuses the toe holes and has a much wider heel pattern.

I have some PX14 that I need to sell anyway. I'll lay out the mount tonight and get a more concrete answer.

Thank you so much!

[kidwoo]

This thread made me realize I have a problem. Or that I fit right in with you wierdos.

188 protests
187 GPO
183 GPO with walkin stuff
188 Wootest 2.0 with walkin stuff
178 9d8 with walkin stuff

All wood and fiberglass because Um a real man.

My snowboard is a K2 and my split is a jones that sucks CO2 out of the air every step I take so I'm not a total praxis dork.

[whyturn]

192 protest FKS 18
196 wootest inbounds?
187 wootest 2.0 with tecton


Sent from my iPhone using TGR Forums

[Norseman]

Pretty sure it'd be easy. Maybe use a set of PX 12/14/15/18, which reuses the toe holes and has a much wider heel pattern.

I have some PX14 that I need to sell anyway. I'll lay out the mount tonight and get a more concrete answer.

Last clutter post here before a dedicated FS thread goes up...

PX would work for 310mm BSL and up, using existing toe holes.

Forward holes for PX heel are 2-3 cm behind the rear holes for Pivot heel, using a 316mm BSL boot for rough estimation and the toe pieces on the old holes.

Holeholeholeholehole




I'll throw in these PX14 with the skis if that helps. Both toes need new AFD strips glued in. Thin cuttingboard would work ok.

[pfluffenmeister]

You may not have as much of a minority opinion as you think. I pretty much second everything you say about the Qs. I did notice on groomers that I could drive the front of the ski a bit, just had to remember the front is where the uphill inside edge contacts the snow, not the downhill inside edge, so 10ish cm back from where you think.

I had an awesome 5 days in Steamboat on the Qs, everything from no snow to over head blower. I grabbed them at home to ski in Granite and had a Tabke moment, blew up, a ski came off, and I was pissed. 95% awesome, 5% going to kill me. I did start a discussion with Keith about building a pair of flat/rocker Qs, because I feel like that would keep the tips from ever catching and maybe remove the 5% kill you. Just a thought in my head.



I’ve got the following Praxis for now. The Praxis wishlist is pretty short and specific, maybe once we learn the new Praxis plan I’ll try to order them.
Attachment 296425

Left:
Praxis Super Freerides - 195cm, +10mm build, enduro core with carbon, 4 flex, Max top sheet on cherry veneer

Right:
Praxis Protest - 196cm, enduro core with carbon, 4 flex, Tsunami top sheet on white oak



Wish list:
200cm Praxis Powboards
194cm Praxis Quixote’s built fully rocker/flat


Sent from my iPhone using TGR Forums

this makes me laugh as I didn't know who posted this, but recognized the skis and was like: "skibrd?"

Here are my Praxis babies:



191 Lhasa Fat Enduro Core, 3/4 stiff, Carbon & Veneer (Curly tineo)
192 Protest MAP Core, 3 stiffness, Veneer (Bubinga baby!)

[Norseman]

Mount those motherfuckers!

[pfluffenmeister]

Mount those motherfuckers!

Agreed.

Biinders on hand for the Lhasa Pows.
Need to track down some STH2s to drop in the holes on the Protests.

[2FUNKY]

Agreed.

Biinders on hand for the Lhasa Pows.
Need to track down some STH2s to drop in the holes on the Protests.

Before mounting the Lhasa check the mount line, it was moved up, not Keiths doing per our conversation. Make sure to compare with your old ones if you liked that location.

[Muggydude]

I ended up on the dimple and loved them there


Sent from my iPhone using TGR Forums