Results 1 to 13 of 13
-
09-06-2017, 09:37 PM #1Registered User
- Join Date
- Feb 2017
- Posts
- 43
$250 for Beast 16 + Bibby Pro's (2012) w/ BD Skins **Needs some love**
Awesome touring setup, selling because I'm using normal skis for patrol this season and I don't wanna keep swapping out the heel inserts to fit DH bindings. Definitely needs some some work, I would do it myself but I don't have time right now. Really just a couple big scrapes from the end of last season that need filling (see photos), and the skins definitely need to be re-glued. If your up to the task this'll be a rad touring setup for next season. The skis technically have 3 mounts -- once with MFD plates, then with Beasts, and once moving the toe pieces back to accomodate smaller boots. The sliding plate on one of the brakes is missing, and one of the toe-piece actuators needs to be manually popped back up sometimes (a pretty common Beast issue, I popped it down in the photos so you can see what I'm talking about) but neither affects touring or skiing performance, and the bindings passed all the official tests when I had them mounted at OGE in Burlington.
Definitely still a sweet setup once the few kinks have been worked out. I hope these find a good home!
$250.00 + Shipping (from Vermont)
-
09-06-2017, 09:40 PM #2
Potential dibs pending BSL?
-
09-06-2017, 10:28 PM #3
I'll hop in line.
-
09-07-2017, 03:26 AM #4
I will too. Just in case.
Perfer et obdura, hic dolor olim utior tibi. -Ovid
-
09-07-2017, 04:41 AM #5
This is what this board USED to be about! Maggots hooking ppl up. Love it!
If all else falls through, I'm down the road from ya- likely no shipping!
-
09-07-2017, 07:25 AM #6Registered User
- Join Date
- Feb 2017
- Posts
- 43
Shoot forgot to include that -- Skis are 190s and the BSL is 297 with the heel pieces moved pretty far forward. Definitely enough room to move them back to 307ish and possible 315, but I'm not sure how far you're supposed to move the heel pieces back (there's about 2cm on the track behind the current position but I'd feel better keeping them a bit off the end). In the photos they're at 297 and you can see the bolt that moves them back.
-
09-07-2017, 09:09 AM #7
bindings alone are worth the $250
-
09-07-2017, 10:33 AM #8
BSL won't work for me, so i will pass on this sweet deal. Next in line!
-
09-07-2017, 02:12 PM #9
I will also hop in line *very* just in case haha.
-
09-08-2017, 11:24 AM #10
Great deal!
-
09-08-2017, 11:36 AM #11
Pick the Vermonter!
-
09-08-2017, 11:54 AM #12
-
09-10-2017, 10:44 AM #13Registered User
- Join Date
- Feb 2017
- Posts
- 43
Sold to PlayItLeo
Bookmarks