Results 51 to 75 of 984
-
04-14-2017, 09:00 PM #51Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,040
-
04-14-2017, 10:40 PM #52
Not the least bit hurt. I have thick skin. I had trouble understanding what you were trying to say, and I didn't have my tea leaves handy, so I made a best guess ... admittedly in shotgun style.
No doubt, at some point in the life-cycle of CAST-1, they evaluated how well it met their design goals and what could be improved: skiability/tourability, use and handling in the field, reliability/durability, ease of manufacture, modularity (your concern), etc.
I think if you free yourself from the Solly-fit/Dyna-look concept, it will make more sense. The product isn't evolving that way. I think Judo Chop! said it best:
If the product is bomber, it will develop a reputation and grow within its admittedly small market segment and Salomon aficionados will happily adopt it. They might lose a few sales to people who want to adapt their own bindings, but sometimes those sales are the ones that cost you more than you ever expected. Ask me how I know ;-)
Cheers,
ThomLast edited by galibier_numero_un; 04-15-2017 at 04:27 AM.
Galibier Designcrafting technology in service of music
-
04-19-2017, 09:38 AM #53Registered User
- Join Date
- Feb 2011
- Location
- ID
- Posts
- 31
Does anyone have a link to a video of the new version? I remember when V.1 came out CAST had some nice product videos on their site, but I don't see anything like that for v.2.
-
04-19-2017, 10:58 AM #54Registered User
- Join Date
- Aug 2014
- Posts
- 3,342
-
04-19-2017, 01:48 PM #55Registered User
- Join Date
- Feb 2011
- Location
- ID
- Posts
- 31
-
04-20-2017, 06:58 PM #56Registered User
- Join Date
- Mar 2006
- Location
- da hood
- Posts
- 1,119
-
04-20-2017, 08:01 PM #57
This new CAST system looks great except you are limited to Alpine DIN or WTR soles. So no go with ISO 9523 soles like the Salomon MTN Lab boots.
-
04-21-2017, 03:15 PM #58
Regarding AFD...
"This part is made by LOOK to make the Pivot or FKS 18 binding WTR compatible. You have to unscrew the toe piece from the ski to swap out the AFD's. The WTR norm is based on the ISO 9253 with added AFD's to make the boots release properly. The vulcans are ISO 9253 so they will fit into the bindings with the right geometry but may not release as well as a full WTR boot because they have different material and flatness at the AFD , (binding contact point)."Fear, Doubt, Disbelief, you have to let it all go. Free your mind!
-
04-21-2017, 03:38 PM #59
As has been pointed out many times by both myself and others, many touring boots with ISO 9253 soles DO NOT fit in WTR bindings. I don't give a fuck what the spec theoretically says, they don't all fit, due to not enough height adjustment. That's why Salomon changed the first generation Guardian "WTR" binding to the Guardian "WTR MNC." The MNC version fits heavily rockered touring boots such as Maestrale RS, Mercury/Vulcan, etc. The original WTR version does not.
I have not specifically tried the Pivot 14 WTR or the new CAST WTR binding with boots like this, nor do I have any experience with the MTN Lab so can't comment on the fit of any of those. But don't assume that any ISO 9253 sole will fit in any binding designed around the WTR spec, because that is not accurate.
-
04-21-2017, 04:26 PM #60
Agree with 'adrenalated'. I personally would not use an ISO 9253 boot in a WTR binding that has a fixed AFD, even if it appeared to fit. Assuming the binding has enough adjustment range to adjust the toe height properly, the issue still remains with the soft rubber on the boot sole interfacing with a fixed AFD. This is why most (all?) MNC bindings use a moveable/sliding AFD.
As for the Look P18/CAST system, it's a double whammy because there is no toe height adjustment AND the AFD is fixed. They are able to do WTR because of the hard plastic section on the toe area of WTR boots.
Note: It is great that CAST made the Alpine DIN and WTR AFDs easily swappable without having to unscrew the toe piece as you would normally need to do on a regular P18.
-
04-21-2017, 08:04 PM #61Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,040
Does anybody really use Vulcans or mtnlabs in a P18 toe piece and altho that heel piece will probably work better than most alpine bindings with a thicker boot AT heel that is not the boot heel it was designed for either
Is a mtnlab owner seriously the focus group CAST was aiming for, wasn't CAST designed to allow a user the ability to tour up with any alpine boot ( but probably big & stiff as fuck ) the user has modded with a tech fitting ??Lee Lau - xxx-er is the laziest Asian canuck I know
-
04-21-2017, 09:20 PM #62
A lot of options these days. Be great with my lupo c ti. My cast 1 with sth is working good but the toe height and wings loosen and need readjusting . Blue loctite on the toe height screw works for a while but the wings need adjustment daily. Plate the tech toe is mounted on is getting more sloppy too. Cast 2 would solve all that and more. Lange free tour , Cochise, guide pro , atomic xtd are other good options too probably. I don't think they have rocketed soles. But then again, I've run tr9's in 997's and lived
-
04-21-2017, 10:16 PM #63
-
05-26-2017, 12:13 PM #64
Well, this is a change in strategy:
Customers must purchase their alpine bindings separately and send them to Cast for the installation of our components.Price for the kit plus installation
MSRP: $350.00
Special Pre-Order Price: $305.00
I wonder if they will accept used bindings for conversion? That could be a good thing for a lot of mags.
-
05-26-2017, 10:11 PM #65
You could see it headed this way. Much as I'm sure the extra $$$ of being a value-added seller of Look bindings appealed to them, the idea of floating the cash to stock the inventory must have been prohibitive.
If there's a structural difference in the modded parts of the Pivot 18 vs. Pivot 14 toes, I might be in a bit of a conundrum. I run about 8-1/2 on my toes, and would hesitate to get into a binding with a minimum DIN setting of 8. The 15 was really appealing. It might be time to start hunting for softer springs.
... ThomGalibier Designcrafting technology in service of music
-
05-26-2017, 11:27 PM #66
Don't see any model but the 18 working with the new toe pedestal, 14 is out.
I wouldn't worry a bit about running it at 8.5 or even 8. Trust the folks at DIN.
-
05-27-2017, 01:01 PM #67
What concerns me isn't so much "normal" situations (I didn't make that clear). Once or twice while recovering from an injury, I dialed down one toe piece into the 7 range.
I'll bet the equivalent to Pivot-15 springs can be had. It's been way too long since I've had a Look binding in my hands however, and I don't know if replacing a spring is as simple (no proprietary tools) as replacing a Dynafit spring.
Shimano road brake levers come to mind. Shops have no problems tearing down Campy Ergo shifter levers, but they won't touch a Shimano.
I'll watch this unfold with great interest.
... ThomGalibier Designcrafting technology in service of music
-
05-27-2017, 01:47 PM #68
Take an 18 and count the number of turns (or partial turns) it takes to increase one DIN setting. If you want to be ocd, count turns from 8-18 and divide by ten. Drop back to exactly 8, and count the number of turns to the point where the spring no longer has any preload. There's how far you can go below 8, since binding springs are linear. You know the mechanism can go lower than 8 without internal friction becoming an issue, because the Pivot 15 exists.
I'll bet you can drop down to at least 7 before running out of spring, and you could always have a shop test the release to confirm it.
-
05-27-2017, 06:11 PM #69
That's just too simple ;-) I'll bet I can get down to at least 7.5 if not 7, which would give me all the comfort range I'd (hopefully never) need.
... ThomGalibier Designcrafting technology in service of music
-
05-30-2017, 04:36 PM #70
I got the email update this morning, that confirmed what my best guess was - the sourcing agreement with LOOK fell through.
Looks like they will be willing to do the conversion with not new bindings, so that's good... They also mention the possibility of a 2nd ski kit. However the 14 DIN version looks to be DOA.
-
05-30-2017, 07:23 PM #71Registered User
- Join Date
- Mar 2006
- Location
- da hood
- Posts
- 1,119
I'm sure the Look attorneys shot this down as they have no control over the modification of their bindings and any resulting injuries and lawsuits.
That being said, I'm excited that the price tag drops significantly with anybody holding a pair of P18s. The additional toe plate to add to a second pair of skis also brings in a lot of options.
-
05-30-2017, 07:58 PM #72Galibier Designcrafting technology in service of music
-
06-07-2017, 06:28 PM #73Registered User
- Join Date
- Jun 2017
- Posts
- 93
My original CAST plates are only one season old, and I still love them. I'm going to continue to run them next season but I'm very curious to see how people like the new and improved version.
I still think the CAST system is the only AT system that doesn't compromise performance on climbing or skiing.
Stoked to see pictures of skis mounted with new CAST systems in this thread come November.
-
07-04-2017, 10:47 AM #74Registered User
- Join Date
- Jan 2016
- Posts
- 12
Will springs out of a set pivot 14 work in pivot 18
-
07-04-2017, 10:57 AM #75Registered User
- Join Date
- Sep 2010
- Location
- SW CO
- Posts
- 5,597
CAST might be able to convert an old P/FKS 155. Or follow 1000 Oaks method above for backing the rv down to under 8. But really, if you routinely run an rv under 8, are you really skiing hard enough to need a CAST system?
"Alpine rock and steep, deep powder are what I seek, and I will always find solace there." - Bean Bowers
photos
Bookmarks