FS Dyna Dukes $65 shipped

[mcfarlandandrew]

Grabbed these off Ebay two weeks ago and changed directions with the wife's setup before they arrived.

$45 shipped

[TransplantedFromRMNP]

EPF or non EPF?

[mcfarlandandrew]

Not sure - how can I tell?

[mcfarlandandrew]

Bump for price drop - $45 shipped. Just got a pair of non-EPF barons and the holes line up with those.

[prsboogie]

Anyone know if schizo/demos will fit on there?

[PlayItLeo]

Anyone know if schizo/demos will fit on there?

Print a duke template and see if it lines up with your schizos...

[prsboogie]

Great idea thx

[prsboogie]

I'll take them as long as the binding match up. Printing out now

[ACH]

EPF or non EPF?

Print a duke template and see if it lines up with your schizos...

From the waybackmachine:
Dynaduke (same as listed here):
These swap plates mount easily on any pair of skis, using standard mounting tools and have extra-durable threaded holes which match the pattern for Marker Duke or Baron bindings, as well as all versions of Dynafit bindings. They are also compatible with Dynafit brakes and/or crampons. It takes about 5 minutes to attach either style of binding using the included screws and tools. If care is taken to avoid cross-threading the screws, these plates will last through 100's of swaps.

These plates add about 130grams per ski, and 7mm of stack height to your bindings. They are specifically designed to minimize to effect on the flex pattern of the ski. The wide mounting pattern is designed to maximize torsional stiffness even on the widest of new-school skis.

----

Markerfit:
These swap plates mount easily on any pair of skis, using standard mounting tools and have extra-durable threaded holes which match the pattern for all versions of Dynafit (both Radical and Traditional versions of ST, FT, and TLT Speed) as well as all versions of the Marker Royal family (Duke, Baron, Duke EPF, F12, F10, Jester, Griffon, Lord, Squire). They are also compatible with Dynafit brakes and/or crampons. It takes about 5 minutes to attach either style of binding using the included screws and a Pozi-3 screwdriver. If care is taken to avoid cross-threading the screws, these plates will last through 100's of swaps.

MarkerFit is the successor to our very first and most popular swap plate product the DynaDuke. The design is similar and will mount in the same hole pattern as the Dynaduke if used with the Marker Touring series of bindings. When used with the Marker Alpine series, the heel plate may need to mount in a different location depending on the boot size. These plates are intended to support either DynaFit/Jester or DynaFit/Duke binding swaps, but not Jester/Duke swaps.

These plates add about 130grams per ski, and 7mm of stack height to your bindings. They are specifically designed to minimize the effect on the flex pattern of the ski. The wide mounting pattern is designed to maximize torsional stiffness even on the widest of new-school skis.

[mcfarlandandrew]

Sold

[prsboogie]

From the waybackmachine:
Dynaduke (same as listed here):
These swap plates mount easily on any pair of skis, using standard mounting tools and have extra-durable threaded holes which match the pattern for Marker Duke or Baron bindings, as well as all versions of Dynafit bindings. They are also compatible with Dynafit brakes and/or crampons. It takes about 5 minutes to attach either style of binding using the included screws and tools. If care is taken to avoid cross-threading the screws, these plates will last through 100's of swaps.

These plates add about 130grams per ski, and 7mm of stack height to your bindings. They are specifically designed to minimize to effect on the flex pattern of the ski. The wide mounting pattern is designed to maximize torsional stiffness even on the widest of new-school skis.

----

Markerfit:
These swap plates mount easily on any pair of skis, using standard mounting tools and have extra-durable threaded holes which match the pattern for all versions of Dynafit (both Radical and Traditional versions of ST, FT, and TLT Speed) as well as all versions of the Marker Royal family (Duke, Baron, Duke EPF, F12, F10, Jester, Griffon, Lord, Squire). They are also compatible with Dynafit brakes and/or crampons. It takes about 5 minutes to attach either style of binding using the included screws and a Pozi-3 screwdriver. If care is taken to avoid cross-threading the screws, these plates will last through 100's of swaps.

MarkerFit is the successor to our very first and most popular swap plate product the DynaDuke. The design is similar and will mount in the same hole pattern as the Dynaduke if used with the Marker Touring series of bindings. When used with the Marker Alpine series, the heel plate may need to mount in a different location depending on the boot size. These plates are intended to support either DynaFit/Jester or DynaFit/Duke binding swaps, but not Jester/Duke swaps.

These plates add about 130grams per ski, and 7mm of stack height to your bindings. They are specifically designed to minimize the effect on the flex pattern of the ski. The wide mounting pattern is designed to maximize torsional stiffness even on the widest of new-school skis.

Thanks for posting this

[prsboogie]

Plates came in today. Thanks a lot.