Screw list for Sollyfit plates?

[hutash]

Got a set of Solly fits, but no screws. About have the packing list from Jondrom for the plates?

Does Binding Freedom sell pre-packed packages of sollyfit screws? Couldn't find anything on his website.

[doebedoe]

They were pretty responsive when I emailed them regarding screws -- esp as the sollyfits are one of their former products I'd bet they'd know and help.

[skinipenem]

Maybe someone has the packing list and could post. I lost mine a long time ago. I think they are m5x8 screws.

[Alpinord]

What's the difference in thickness of the plates vs BF inserts? Seems like it'd be easy to figure out from the Binding Freedom screw list: (or just measure the depth from binding through plate?)

SALOMON:
❅-STH 2 WTR
•8 – 20mm small heads (20mm screw is not yet available but will be introduced for the 15/16 season, you can source your own screws for now)
•8 – 12mm small heads
❅-Warden
•8 – 12mm small heads
•8 – 16mm small heads
❅-Guardian
•8 – 10mm flat heads
•12 – 12mm flat heads (screw coming soon – if ordering for this binding its best to source your own 10mm counter sunk screws. Our Small head screw gets in the way of the heel release function. Our new flat head screw being introduced for next season will eliminate this problem)
❅-914/916/STH916
•2 – 12mm small heads
•4 – 14mm small heads
•6 – 16mm small heads
•4 – 26mm low heads
❅-STH12/STH14/Z
•4 – 12mm small heads
•2 – 14mm small heads
•6 – 16mm small heads
•4 – 20mm low heads
❅-STH14 Driver (2011 & newer) NOT STH2
•4 – 12mm small heads
•10 – 16mm small heads
•4 – 26mm small heads
❅-912 Ti
•12 – 18mm small heads
•4 – 26mm low heads

[doebedoe]

I think OP was asking for the screws to mount the plates to the skis? Not bindings to the plate?

Mine came with some but of course i didn't measure before putting in. Were pretty standard looking flat head alpine binding screws.

[Alpinord]

I think OP was asking for the screws to mount the plates to the skis? Not bindings to the plate?

Mine came with some but of course i didn't measure before putting in. Were pretty standard looking flat head alpine binding screws.

Then plate thickness plus embed length?

[hutash]

No, I need the binding to plate screws.

That link above should do the trick, thanks.

[skinipenem]

Screw lost for dynadukes

Sorry can't figure out how to rotate image

[Alpinord]

Sorry can't figure out how to rotate image

[hutash]

That's the Dynaduke list, not Sollyfit list. I did find a copy which I will take a photo of a post for future reference. I think it is the same list (but with drawings) that Aplinord posted above.

[hutash]

FYI...