Results 101 to 125 of 1319
Thread: Fritschi Tecton
-
05-27-2017, 11:36 PM #101
That was my take as well (the design goal of saving weight via a shallower heel cup), but I'm definitely taking a wait and see approach with them.
... ThomGalibier Designcrafting technology in service of music
-
05-29-2017, 04:03 PM #102Registered User
- Join Date
- Nov 2011
- Posts
- 2,480
The only thing fritschi could bring to the table for me are working brakes...
-
05-29-2017, 04:51 PM #103
Agreed about brake deployment being a bit finicky. They're still my binding of choice for anything but uber-light. #2 would likely be a coin toss between G3 & ATK. I think Lindahl's approach (a page or two back) is the way to go as far as fixing Vipec brake deployment.
... ThomGalibier Designcrafting technology in service of music
-
05-29-2017, 05:31 PM #104Registered User
- Join Date
- Nov 2011
- Posts
- 2,480
-
05-29-2017, 11:23 PM #105
At the end of the day, it seems as if brake reliability implies weight (robustness).
I've been threatening (to myself) for well over a year to pick up a set of B&D leashes to gain some confidence in their efficacy - use both for a while until gaining enough confidence in them to remove the brakes. This has been a screwy season for me, and a lot of gear experimentation didn't happen.
... ThomGalibier Designcrafting technology in service of music
-
05-30-2017, 08:11 AM #106Registered User
- Join Date
- Nov 2011
- Posts
- 2,480
Just throwing a half ass brake for the sake of having a brake that usually deploys in the showroom is bullshit.
I was looking in to fusible link leashes. I NEVER fall, but it's a bit unerving when half the time the breaks don't deploy when I step out of the binding.
-
05-30-2017, 12:55 PM #107Registered User
- Join Date
- Jul 2005
- Posts
- 3,230
^^^im soooo much better than you.
-
05-30-2017, 08:16 PM #108
I agree with you, but in fairness, I haven't seen a tech binding with brakes that work as well as an alpine binding's. It has to be the weight thing, although the Ions' brakes are acceptable, as would be the Vipecs' if they'd deploy dependably (I'm slowly dialing them in - don't want to file away too much plastic).
The last Dyna-fiddle brakes I played with were the Comfort/Vertical generations and they were downright scary.
... ThomGalibier Designcrafting technology in service of music
-
05-31-2017, 12:24 PM #109
never had a problem with vertical brakes on 3-4 different sets of dynafit bindings from 92-132 mm
Aggressive in my own mind
-
05-31-2017, 05:12 PM #110Registered User
- Join Date
- Nov 2011
- Posts
- 2,480
-
05-31-2017, 07:26 PM #111
I'm sticking with old tech...
frustrating that these new bindings struggle so with the brakesAggressive in my own mind
-
06-01-2017, 10:57 PM #112
Methinks you're experiencing a bit of the IAE (Internet Amplification Effect).
If you judge a brake on it's function (to stop a ski), then the Ions and Vipecs are far superior to the TLT Comfort and Vertical generations. I have no experience with Radicals. With the Comfort/Vertical, the brake arms swing open dependably, but the springs are so weak that I'd call them ski "slower-downers" rather than brakes.
Another thing to keep in mind with the Vipecs (much as I'd feel more comfortable if they deployed more smoothly on the bench right out of the box) ... if you release from a ski, it's bouncing, vibrating and flexing, and renders all of this non-deploying brake commentary somewhat academic. The stickiness we're reporting requires very little vibration to free the brake.
One caveat regarding daught's point: I don't ski in the PNW where wet snow might change the equation in terms of icing. I'll bet Alpy and Lee can comment further with respect to wet snow.
... ThomGalibier Designcrafting technology in service of music
-
06-03-2017, 08:06 AM #113Registered User
- Join Date
- Apr 2004
- Location
- Vermont
- Posts
- 316
If you don't like the way the brakes work, then dump them and go with a leash. A lighter option and you won't be digging around for a lost ski.
-
06-03-2017, 09:16 AM #114
-
06-03-2017, 09:58 AM #115Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,085
While they do always deploy in a rather elegant fashion, the RAD1 & Vert brakes don't necessarily stop well IME
I have seen a dynafit ski/rad binding still go a very long way with the brake deployed on a couple of occasions, once on a hard blue ski hill run and once in the BC in dust on an alpine crust, they just don't work the way I have come to expect from alpine binding brakes,
one thing I tried was swapping salomon brake guardian arms (cheaper than dynafit) into a RAD brake assmebly , it works well/ deploys well but the springs are so weak the arms don't stay down so i tried to figure out another way to strengthen the springs but couldn't, i figure they will work fine in pow and they are now on a pow ski
I Got some BnD leashes they work well on any sized ski, I haven't had to try out the safety link but it should work, but brakes are just more convenient so I put brakes back on the ski they were used on for now, still I think i will use the BnD on big pow days so I don't lose the skiLast edited by XXX-er; 06-03-2017 at 10:56 AM.
Lee Lau - xxx-er is the laziest Asian canuck I know
-
06-03-2017, 02:36 PM #116Galibier Designcrafting technology in service of music
-
07-27-2017, 12:05 PM #117Registered User
- Join Date
- Jul 2017
- Posts
- 14
Now that the Marker KP is apparently dead in the US for this upcoming season, it seems Fritschi has entered the market with perfect timing. I do a lot of sidecountry/slackcountry, and a lot of skinning in-bounds early in the morning before work at my local hill. About 50/50 for lift days and skinning days. I was hoping to pick up some kingpins this summer to replace my tank-like Barons, but my local shop sold out just the other day.
Came on here to see what else is out there. Tecton looks like a good fit for me, and would allow me to up my touring game in the BC this winter. Guess I will pick up a pair in October and report back once we have some skiable snow in NM.
-
07-27-2017, 12:49 PM #118
Report back with some naked pics of your girlfriend.
Well maybe I'm the faggot America
I'm not a part of a redneck agenda
-
07-27-2017, 12:56 PM #119Registered User
- Join Date
- Jul 2017
- Posts
- 14
-
07-27-2017, 05:13 PM #120
Not even talking the Tecton, but I got a few days in on the black Vipecs late last season in both great and shit conditions, and I'd ski that binding everyday and inbounds. Toured and skied very very well. I'm thinking the Tecton is going to be a winner.
-
09-19-2017, 11:27 AM #121
-
09-28-2017, 06:17 PM #122
-
09-28-2017, 08:30 PM #123
-
09-28-2017, 08:58 PM #124
One of us was going to cave first on Tectons ;-). It was only a matter of time.
Of course, your first assignment is to report back on the hole pattern for the heel track. Dawson seems tlo think the pair he got last year had a demo track - that Vipec/Evo and Tectons use the identical template.
... ThomGalibier Designcrafting technology in service of music
-
09-28-2017, 09:15 PM #125
Bookmarks