Results 2,926 to 2,950 of 4109
-
09-16-2021, 05:34 AM #2926
How bout these? American Classic is back and the rubber looks good and it’s cheap! Just ordered a pair of Wentworths 700x40 tubeless, $70 for the pair! Gonna throw them on my gravel rig, will report back…
https://bikerumor.com/2021/09/15/ame...iny-price-tag/crab in my shoe mouth
-
09-16-2021, 05:41 AM #2927Registered User
- Join Date
- Oct 2017
- Location
- Evergreen Co
- Posts
- 969
I’ve been impressed with Maxxterra. Hard to put a number on but it seems a lot more grippy than their standard dual casing tires.
-
09-16-2021, 06:44 AM #2928
I put some max grip on the back for riding some rock slab last year and was blown away at the Velcro feel for that… then in swapping I ended up with that in the back and max terra in front and that was a mistake… it’s a boat anchor but man is it also fun.
Skared…
I think it depends on what fun is
Sent from my iPhone using TGR Forumswww.dpsskis.com
www.point6.com
formerly an ambassador for a few others, but the ski industry is... interesting.
Fukt: a very small amount of snow.
-
09-27-2021, 10:28 AM #2929
Update on Butcher and Eliminator.
I'm a bit torn on these, when they work well, I think they work great. However, I've had a few instances that are leaving me questioning them.
1. Eliminator Grid Gravity T7/T9 29 x 2.6- This worked great on the rear on the Switchblade. It's lacks the full braking / climbing traction that something like a DHR has, but it was very predictable while cornering. Ultimately, though, it is slow as hell. Whether it's the compound or the casing I was struggling to keep up on climbs. The T9 cornering knobs seem to be wearing faster than the T9 Butcher I have in the front. Center lugs still look good.
2. Eliminator Grid Trail T7 29x 2.6: Same as above but much improved on the rolling resistance. For general trail riding it's great. For Steep and Loose it could be better. Doesn't seem to have any wear issues, but too early to tell.
3. Butcher Grid Trail T9 29 x 2.6: I got this as a DHF alternative. Braking traction is great. Compound seems good for our dry trails. Wear is appropriate (better than MaxxGrip) / wearing slower than the T9 compound in the rear Eliminator. I do, however, think they have a design issue. The Side Lugs are set next to the center lugs, which is in contrast to the DHF where they are offset from each other. On the Specialized, with the side and center lugs lined up, this creates a clear lateral channel. I've had a lot of front end "push", especially on looser / sandy surfaces. I've never had this issue with a DHF, so I don't think it's a lean issue. Maybe there is some soil conditions where this is helpful (organic / wet?). I can also see this open channel design being useful on a rear tire where a controlled drift can be welcomed (Maxxis Dissector has a similar lug alignment). Because of this issue, though, I've lost trust in the tire.
4. Specialized Eliminator Grid T7 29x 2.3: This is on the front of the burlier wheelset for the Epic Evo. Some far I'm happy with it. Rolls reasonably well and seems to hook up when I mob into corners way too hot for 120mm of suspension to handle. Definitely not an XC tire but fast enough for when you need a grippy tire on a trail bike. I have gotten one puncture through a rocky section that was sealed without issue with a Stan dart. Riding buddy didn't puncture, but I can't say I'm surprised I got the flat.
5. Specialized Purgatory Grid T7 29 x 2.3: Rear of the burley wheelset for the Epic Evo. Same as above; seems completely appropriate for a trail-bike rear tire. Less grip than anything I'd run on the Switchblade, but fast enough for when I want a grippier tire on the trail bike.
-
09-27-2021, 02:07 PM #2930
Im with ya on the eliminator grid gravity. The t7 center knob rubber sucks on wet roots and rocks. Worse than any tire in recent memory. Other than that theyve been great. I bought them to try thinking theyd extend the tire life for the bike park and they have. Good design in that regard because the t9 side knobs still work well.
No issues with the butcher t9. Quite impressed actually. Might be our dirt but super traction on some funky missed lines and they just hooked up no drama. Considering putting one ln the rear for fall.
Grid gravitys are a nice weight compromise looking at dh tires. Not the heaviest or heaviest duty but then theyre not as sluggish as heavier options. After a few weeks im noticing sone tire squirm unless i pay attention to psi. 20/21 front w no liner was sketchy and any low 20s rear was the same w liner. Started to hear rim pings and thought the tires were going to rip off.
I'd like to get some sturdy casing 2.6 ultrasofts from schwalbe for fall. Big betty f/r or mm f/bb r in supergravity. Super dh might be overkill for my spring fall usage but with the wider tire i want a more rigid casing to mask sone of that balloon tire feel. I think its just schwalbe offering sonething like that. Weight penalty but they were good shoes
Sent from my SM-G950W using TGR Forums mobile app
-
09-27-2021, 02:22 PM #2931
-
09-27-2021, 02:29 PM #2932Registered User
- Join Date
- Feb 2014
- Location
- NorCal coast
- Posts
- 1,951
I noticed push on the Butcher 29x2.6 also, and chalked it up to being 2.6 and round profile. It honestly felt mismatched with the Eliminator... like the Eliminator was a bit better grip than I expected, and the Butcher worse.
-
09-27-2021, 02:35 PM #2933
Agreed that the Butcher pushes a little more than a DHF.
The Butcher falls into the category of "looks like a DHF, but performs a little worse," which is a category that covers a shitload of tires from the last ~15 years.
-
09-27-2021, 02:45 PM #2934Dad core
- Join Date
- Dec 2006
- Location
- Back in Seattle
- Posts
- 1,259
Eliminator T7 vs Dissector Maxxterra vs Nobby Nic as the front tire on the hard tail trail bike in the PNW? Looking for some new rubber as I start to ride the hardtail more due to rain, want something fast rolling and lightish but still solid grip for more packed smoother trails but still plenty of wet roots and rock. I have a Hans Damf on there now which I don't really like, had a magic mary on there before but want something faster. I also have a FS for harder trails.
-
09-27-2021, 07:53 PM #2935Registered User
- Join Date
- Oct 2009
- Posts
- 536
New Season, New Tires, New Thread
Agree with 3., 2.6 pushes out front but only recently while worn in a grid trail T9. I feel like my cornering trust has gone down recently. I want to try the 2.3 butcher grid trail T9 up front as it actually measures close to a 2.4. I think taller center knobs would also be good, closer to a MM.
As for the eliminator 2.3 grid trail T7 in the rear, love it, like a dissector. I live in the desert per-say and its been great other than a torn side lug which i super glued. Great grip on up and down and great breaking in the dry.
Overall great tires for the money, skin wall looses air faster than other non-skin kin. Will buy again in 2.3 on both ends.
Sent from my iPhone using TGR Forums
-
09-27-2021, 09:41 PM #2936
Eliminator T9/T7 2.6 Grid Gravity Whatever DH layup. Set up in the back.
1. Wearing like a MaxxGrip. Maybe wearing faster. Probably not quite as grippy. So the lower price advantage isn’t working out, since I wanted it to last like a MaxxTerra.
2. Good tread grip 85% of the time. But 15% of the time it’ll swim around a bit. Especially on fast flat turns. So, like a Butcher: great straight line traction. Not as great for the turnings.
Sent from my iPhone using TGR ForumsHowever many are in a shit ton.
-
10-07-2021, 10:50 AM #2937
Speaking of Eliminator, anyone interested in this one?
Ordered a black one from Specialized and they sent me the penis-colored version. Vanity prevents me from mounting it on my glorious-looking bike so I got in touch with customer service to setup up a return after I found the right model locally. No response from CS until yesterday when I got an email saying keep the tire and expect a replacement in the mail. Now I have 3 Eliminators. I'll put the tan sidewall one in the mail for shipping + beer $$."Your wife being mad is temporary, but pow turns do not get unmade" - mallwalker the wise
-
10-07-2021, 11:35 AM #2938Registered User
- Join Date
- Oct 2009
- Posts
- 536
I’ll take it if it’s not already spoken for, p.m. sent
Sent from my iPhone using TGR Forums
-
10-07-2021, 11:48 AM #2939
Tire is most likely gone, 2 people in line, I responded to PMs!
"Your wife being mad is temporary, but pow turns do not get unmade" - mallwalker the wise
-
10-15-2021, 09:08 PM #2940Registered User
- Join Date
- Oct 2010
- Posts
- 1,953
New Season, New Tires, New Thread
Somebody rec me a DHF-style front tire in 27.5 x2.5ish.
I have a DHF in DD and I’m loving the sidewall support. Unfortunately the DD only comes in MaxxGrip and it’s suuuuper slow. I can feel myself slowing down on stuff I used to accelerate on. It’s taking a lot more pedal energy and I’m losing momentum in the pumps. DHF does come in EXO+ but from what I’ve read, it’s more puncture protection and doesn’t do anything for squirm.
Thinking Vittoria Mazza? I like the 4C compound (run on my Barzo/Mezcal) and it’s 120tpi. Maybe has more sidewall support than an EXO? Open to other suggestions.
-
10-15-2021, 09:29 PM #2941
I've been running a Mazza for a few months. Very high quality tire. Supportive and supple with a great casing. About to take it to Moab to see how it grips on slickrock.
-
10-15-2021, 09:58 PM #2942
-
10-15-2021, 10:02 PM #2943
My new bike came with Mazza/Martello, in the standard casing not the heavier e-bike/enduro or whatever they’re calling it casing.
I’d say the casing is more similar to an EXO than a DD, haven’t ridden EXO+. It’s not particularly thick or stiff, and I did put a good size hole in the Martello rear in only a few rides so replaced it with something more robust. As far as the tread goes though, I’ve been quite happy with the Mazza.
-
10-15-2021, 10:43 PM #2944Registered User
- Join Date
- Oct 2010
- Posts
- 1,953
-
10-16-2021, 03:35 PM #2945
-
10-16-2021, 05:42 PM #2946
-
10-18-2021, 07:37 AM #2947
So I just switched from 2.6 Specialzed Butcher/eliminator T9 to 2.5 DHF/2.4DHR 2 both 3c Maxxterra WT EXO +,. While I might end up the extra cushioning of the 2.6 rear tire on my Canfield N9, the Maxxis tires grip on wet roots an rocks so much better. like after 2 year on Specialized tires its like I can ignore root section when wet, the tires just grip so good that there is almost no difference between the hard surface and the dirt. With that said I think the Specialized combo was better in loose stuff, had more volume, and honestly on warm dry days probably is impossible to feel the less sticky rubber.
Basically if your ride where it can be damp/wet/ "Sweaty" rocks on humid days maxxis is worth the extra coin, if you are in dry most of the time, Specialized can save some money and proved to be a really durable tire. Does Maxxis Make a 2.6 EXO + DHR2 3c Maxterra? I can nt find that combo anywhere
-
10-18-2021, 09:34 AM #2948
They do, or at least did. They’re on the 2020 Maxxis catalog, but I didn’t see them listed on the website anymore. A few places had 29” in stock:
https://www.jensonusa.com/Maxxis-Min...-II-29-Tires-7
Quick search couldn’t find 27.5.
-
10-18-2021, 10:10 AM #2949Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 30,896
Bullit came with a 29" assegai 2.5 in front/ 27.5 DHR II 2.4 rear both in double down and i think I would just buy them again when i need new rubber cuz I'm impressed with how they grip
but then again i'm pretty much a minion dhf/dhr fan boiLee Lau - xxx-er is the laziest Asian canuck I know
-
11-05-2021, 05:21 PM #2950Registered User
- Join Date
- Aug 2006
- Location
- Calgary
- Posts
- 1,888
Nice, finally got my hands on a couple ‘unicorn’ tires!!!
Sent from my iPhone using Tapatalk
Bookmarks