Results 1 to 25 of 33
Thread: WTB: Replacement liner
-
02-29-2016, 03:19 PM #1
WTB: Replacement liner
Looking to replace the stock liners from my 3 year old Lange RX130s. Size 28.5. Anyone looking to sell?
-
02-29-2016, 03:51 PM #2
There's a mag selling pro tongues http://www.tetongravity.com/forums/s...d.php?t=300510
Why don't you go practice fallin' down? I'll be there in a minute.
-
02-29-2016, 04:02 PM #3
I have some 28 power wraps. Molded for Kryptons but can certainly take another mold. Only skied 10 days or so.
50$ shipped?
-
02-29-2016, 05:21 PM #4
WTB: Replacement liner
I'm used to the tongue type liners. Do the wrap type fit/perform better?
On the Intuition website, they say to round up for half sizes. I'm interested in the 28s. My Lange boot says 28-28.5. Does this mean the shell is 28 but can fit 28 and 28.5 liners? Thoughts?
-
02-29-2016, 05:30 PM #5
Well...my answer on the wrap vs tongue question would be biased, but tons of feedback in the big intuition thread
I've never understood the "size up for half sizes" logic. The shell for 28 and 28.5 is the same. Size up to a 29 and all you get is a higher volume liner up front. Half sizes in general are a crock, I think, unless you're just getting a thinner boot board on the half size - which is its own special kind of crock.
-
02-29-2016, 05:31 PM #6
I have the same boot in the same size as you. I replaced the liners. They have about 20 days on them. No funk. Not really interested in shipping them but if you're in the Slc area you can have them.
-
02-29-2016, 05:33 PM #7
If you're looking for custom, check out the foam liners from Boot Doctor. I went with the blue ones and couldn't be happier.
-
02-29-2016, 10:10 PM #8
With a wrap liner, it sounds like it's significantly stiffer than a tongue? Since I'm in an RX130, I'm concerned a wrap will be too stiff. Is this correct?
-
02-29-2016, 10:10 PM #9
-
03-01-2016, 09:39 PM #10
Bump
-
03-04-2016, 07:07 PM #11
Bump
-
03-04-2016, 09:39 PM #12Registered User
- Join Date
- Oct 2003
- Location
- JAC
- Posts
- 1,299
I have a pair of 285 Zipfit liners, nice shape. I picked them up lightly used wanted to try them vs the Intuition wrap styles that I have used for 15 years or so. Short story the flex difference was considerable...I'm in a 110 boot and the Intution wraps get me to about a 130. The Zipfits which are a conventional style with laces got me back to the stock flex of about 110. They retail in the 350 range...I'll take 125 shipped.
-
03-06-2016, 08:07 PM #13
Still looking.
I'm also interested in any stock liners (like my current Lange RX 130s 28-28.5) that aren't worn out...
-
03-09-2016, 01:24 PM #14
Bump
-
09-06-2017, 12:02 PM #15
Bump
-
09-08-2017, 08:05 AM #16
Call Lange/Dynastar. I did and got a backup liner for my Rossi Sensor 130 (same boot as Lange RX130 LF)
Number: 435-252-3300
-
09-08-2017, 11:03 AM #17
-
09-08-2017, 06:52 PM #18
Don't have to say anything except you want a replacement. Was about $105 as I recall.
May not be same "exact" liner but it will be a liner that fits your boot. They know what will fit.
-
09-08-2017, 08:50 PM #19
-
09-18-2017, 04:00 PM #20
-
09-18-2017, 05:26 PM #21
I have some old Powerwraps marked "10.0." They're free if you can pick them up. I'm honestly not sure how much life they have left. I live in Lafayette, work in Boulder.
-
01-17-2019, 12:43 PM #22
Bump...back in the market for a replacement or Intuition. Size 28.5. Anyone looking to sell?
-
01-20-2019, 09:05 AM #23
Bump...anyone?
-
01-20-2019, 11:02 AM #24
PMd
-
12-09-2019, 09:33 PM #25
Bump: Looking to replace my liners again from my Lange RX130s. Size 28.5. Anyone looking to sell Lange stock liners they don’t need?
Bookmarks