Are these 912's wrecked? How about these bd sts skin tails?

[kokomas]

Can I cheaply resurrect these oldies but goodies? The binders have a crack in the plastic heel screw plate and the skins have a cracked link at the start of my rubber thingy

[GeezerSteve]

BD sells replacement STS straps

[skimaxpower]

Tabbed Solomon heel track (both the metal and plastic parts) can be easily replaced. Either salvage spare parts from other broken bindings, or ask your local Salomon dealer to order spare parts directly from Salomon's painfully slow an incompetent spare parts office. Probably free, or they might charge you ~<$15.

Or take this as an excuse to upgrade to the STH series which isn't prone to this kind of damage.

[Shorty_J]

See this thread...

http://www.tetongravity.com/forums/s...fix?highlight=

... where I was told that the plate is not structural to the binding and un-necessary to fix... but I fixed it before I was told this, obviously.

[kokomas]

you guys rock

[skimaxpower]

BD sells replacement STS straps

Beware the rabbit hole.... http://blackdiamondequipment.com/en/skiing/spare-parts

[kokomas]

sorry to be slow and lazy, which of these do i need? i don't have the skins in front of me and don't know riveted tail clip stays in or if i need to replace that too. thanks!

just the tail straps
full sts kit

[XXX-er]

http://www.backcountry.com/black-dia...ts-tail-straps

yeah thats ^^what you need, I would spread the clips to get the old straps out, replace them both and keep the used strap for a spare

[ex-powderbroker]

Let me look around to see if I have an extra tail clip for you...

[GeezerSteve]

[url]I would spread the clips to get the old straps out

No, no, don't spread anything. The rubber strap pulls out via the non-pointy end with pliers and a bit of wiggling.

[kokomas]

Ahh I see, thanks. ML I think I'll take you up on that, thanks man

[kokomas]

ML242 is one solid mag! Thanks for the tail strap!

[kokomas]

So I didn't know how to remove the old tail strap (despite you telling me in this thread). You DO NOT have to remove the rivets. With a screwdriver I could pop out the old strap. This video from another thread is helpful in showing how to pop the new strap in at 4:40. Thanks again ML and all

How To: Install Black Diamond STS tail kit: http://youtu.be/CQgsLlV9goc