Results 1 to 15 of 15
-
12-10-2014, 05:35 PM #1
Want simple light(ish) risers for P18s...what are my options?
Does anybody make a simple plug and play riser setup for Look P18s?
-
12-10-2014, 06:03 PM #2
For the toes, or the whole boot? Each new P18/FKS185 comes with a pair of 4mm and 1mm toe lifts, and longer screws. Heel risers used to be made when this was used as a race binding. I would contact your local shop. Most of the time they mount the P18s without the toe lifts, and might have some heel lifts stowed around somewhere.
-
12-10-2014, 06:12 PM #3
I want the whole system up off the ski in much the same way as I've done with salomon drive plus plates and vist plates and derbyflex and whatnot over the years. I'm just curious what's out there for a p18.
-
12-10-2014, 07:03 PM #4Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
-
12-10-2014, 07:06 PM #5
yeah that's a thought.
-
12-10-2014, 07:43 PM #6
Just get some abs or even plexiglass sheet? Drill holes in it, trim, done.
-
12-10-2014, 07:50 PM #7
yeah, that's always an option. I did that last year and contrary to how simple it would seem, it was kind of a pain in the dick with the limitations of my living space and lack of tooling here.
Something like this would be awesome...anybody know where to find a set of these?
Last edited by ill-advised strategy; 12-11-2014 at 11:17 AM. Reason: me fail english, unpossible
-
12-10-2014, 11:15 PM #8
If you were really interested I could probably cnc some out of solid abs or use a 3d printer. How high do you want them? Already have the hole patterns from previous projects. Would cost price of materials shipping, and just a little extra for the time. PM me
-
12-11-2014, 12:03 AM #9
-
12-11-2014, 01:23 PM #10
-
12-11-2014, 01:32 PM #11Banned
- Join Date
- Oct 2003
- Location
- In Your Wife
- Posts
- 8,291
I have a set of brand new DynaLook plates, they've never been mounted, but I have no additional use for them. I would let them go cheaply if you're interested in going that route.
-
12-11-2014, 02:09 PM #12Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,546
Want simple light(ish) risers for P18s...what are my options?
I really think the Dynalook is the simplest easy option.
-
12-11-2014, 07:05 PM #13
GM....PM sent..
-
12-12-2014, 08:02 PM #14
I found my last set at the dump
-
12-12-2014, 09:37 PM #15Goal: ski in the 2018/19 season
Bookmarks