Results 1,626 to 1,650 of 9602
Thread: Home Remodel: Do, Don'ts, Advice
-
02-16-2020, 10:28 PM #1626Registered User
- Join Date
- Feb 2008
- Posts
- 2,734
So I guess something like this is out of the question...
Bought the sink, had a local fabricator that does commercial kitchens weld it into a countertop. The seam is invisible, it's great for cleaning, but I get this look is not for everyone.
-
02-16-2020, 10:49 PM #1627
The look is fine-personally I like a double sink--soapy water in one side, rinse or drying rack in the other, whichever you prefer.
-
02-17-2020, 12:05 AM #1628Good-lookin' wool
- Join Date
- Oct 2005
- Posts
- 11,756
I actually like that a lot, and looks like the ones iceman linked. And it would get the wife on board. Mind if I ask how much labor and materials all together cost?
Sent from my iPhone using TGR Forums
-
02-17-2020, 08:56 AM #1629Registered User
- Join Date
- Feb 2008
- Posts
- 2,734
The sink is actually a cheapie from Overstock. The brand is Vigo: https://www.overstock.com/Home-Garde...39/subcat.html
I did this about 5 years ago, in Portland, so today's pricing in your location may have changed. I don't remember exactly what the sink cost us, but maybe in the $200-$300 range, and it came with a faucet which is admittedly not amazing, but works fine. It's worth noting that the people I worked with could have built a custom sink too - I didn't necessarily need to bring one - but I didn't realize that was an option initially.
To get the sink fabricated into a countertop, I first talked to counter contractors focused on residential, and the quotes were stupid - on the order of $4k for approx. 25 square feet (it's an "L" shape that's about 7 feet on the long side). I called around and got the commercial stainless guys I mentioned - they were at $1700 to fabricate with the sink I purchased, deliver, and install, but I got them down to around $1,350 and installed it myself. It's an Ikea kitchen, and I had installed the bottom cabs and the subtop for the countertop, so I figured installation was not a big deal, but it turned out to be kind of a PITA because there are walls on both sides of the sink run, it was a tight fit, and a big chunk of stainless is not that heavy but is floppy and awkward to move around.
It has all the fingerprint issues that you know and love if you have stainless appliances, but I like that it's easy to clean and bulletproof. One note on that: stainless does not like hot pans directly on top because it can damage the bond to the sub top (we used construction adhesive). Use a trivet!
-
02-17-2020, 09:12 AM #1630
-
02-17-2020, 10:02 AM #1631
I have stainless counters and they are the fucking jam. I like that sink welded in and might add it. The current white porcelain one is looking old and haggard.
Live Free or Die
-
02-17-2020, 11:09 AM #1632Registered User
- Join Date
- Feb 2008
- Posts
- 2,734
-
02-17-2020, 02:50 PM #1633
-
02-17-2020, 09:42 PM #1634
Welp, I've got all my supplies for the guest bathroom remodel that I mentioned a couple pages ago. I've decided to keep the existing tub and redo everything else in the bathroom.
Mentioned this to my parents today (they are the most recent occupants of my guest room) and they asked what I was going to to about the creeking, flexing bottom of the tub. I haven't showered in that room in years, so the creaking wasn't on my radar.
I went in and checked it out and sure enough, the tub flexes and creaks if you stand in one spot.
This makes me question whether the tub is actually cast iron, but also if there is a way to reinforce it while the rest of the bathroom is in demo mode.
What's the verdict- Replace the entire tub? Reinforce by spraying expanding foam under the tub? Any other ideas?
-
02-17-2020, 09:50 PM #1635
-
02-17-2020, 09:51 PM #1636
If it creaks it ain't cast iron. Likely fiberglass that is breaking down. Spray foam isn't going to fix it. Bathfitters shell or I would replace it if it was mine. ICP asks if you used a magnet to check the tub?
www.apriliaforum.com
"If the road You followed brought you to this,of what use was the road"?
"I have no idea what I am talking about but would be happy to share my biased opinions as fact on the matter. "
Ottime
-
02-17-2020, 09:52 PM #1637
Who takes baths? Take it out, fix the floor, and put in a shower, especially if you have another tub.
-
02-17-2020, 09:55 PM #1638
-
02-17-2020, 10:20 PM #1639
The only other tub in my house is in the basement (already removed the master bathroom tub), so I think it would hurt resale value to remove this tub.
Just checked and the tub is magnetic. I'm going to assume it is the cheapest cast iron money could buy for a 1992 spec home.
This brings up other important questions like "is the subfloor intact" and "how the hell is there flexing going on in a cast iron tub?"
-
02-18-2020, 08:05 AM #1640
if it's cast iron, no way the tub is flexing and creaking - it's got to be the subfloor/framing underneath it. You got a crawlspace underneath to check framing and for water damage?
All that being said, I say get rid of it. I hate bathtubs, and fuck resale. But that's just me, and I'm currently fighting the resale battle with my wife over remodeling our baths.
-
02-18-2020, 08:12 AM #1641yelgatgab
- Join Date
- Oct 2002
- Location
- Shadynasty's Jazz Club
- Posts
- 10,249
Magnetic could be enameled steel which could flex enough to creek. It’s possible it was installed on a mud bed and that’s breaking up and making noise under the tub.
Enameled steel wouldn’t be too difficult to pull up and check and reuse or replace. Cast iron is a different story due to the weight.Remind me. We'll send him a red cap and a Speedo.
-
02-18-2020, 09:23 AM #1642
I get this thinking, but it made me chuckle seeing these polar opposite mindsets back to back.
For the record though, I don't see how Kevo gets around this without removing the tub because this sounds like a subfloor issue, so might as well add a shower. If you have 1 tub in the house you have enough that resale won't get tinged.Live Free or Die
-
02-18-2020, 09:42 AM #1643
-
02-18-2020, 10:01 AM #1644
I survived the insulating and sheetrock. Hired two friends for the day and the lift. Went fairly easy. Ready to step up. Want to turn two decks in to sun porches and add around 15 feet to one side of the house. Would include new bathroom and possibly utility room. None of the local architects or builders return calls.
Was wondering about https://www.homedesignsoftware.tv/pp...SABEgJfRvD_BwE
anyone have experience with this product or recommendation on another one.off your knees Louie
-
02-18-2020, 10:12 AM #1645
i've been using sketchup (free version) for all my plans (no codes/permits area). if you need full architectural docs i believe you would need the pro version.
-
02-18-2020, 10:16 AM #1646
-
02-18-2020, 10:19 AM #1647Registered User
- Join Date
- Jan 2010
- Location
- your vacation
- Posts
- 4,738
The tub is steel if you live in any sort of track home its steel if the back of the tub is more up and down than angled its steel a cast iron tub does not make any noise when you stand in it a steel tub has cheep foam between the tub and the floor it probably was installed poorly to begin with tap the tub if it echos its steel if it sounds solid its cast iron I'll bet anything its steel tear it out put a shower in dont over think it
-
02-18-2020, 10:27 AM #1648
-
02-18-2020, 10:37 AM #1649
-
02-18-2020, 10:50 AM #1650
Bookmarks