Results 7,176 to 7,200 of 9600
Thread: Home Remodel: Do, Don'ts, Advice
-
08-15-2022, 04:44 PM #7176
Hey do any of you own/recommend a decent home pressure washer?
Do I need a fully full on pressure washer machine or would one of those high pressure guns you screw onto your hose be adequate for the occasional cleaning of the patio pavers and the super bug gunk from the thule, etc?
Thanks!
ps maybe not the right thread- tools perhaps? anyway this was the first one I saw that was applicable so TY in advanceskid luxury
-
08-15-2022, 05:11 PM #7177
we have a no-name with a Honda engine in it that was $300 or so at Home Depot about 8yrs ago
it goes like a champ with little care
it's got a soap dispenser if you need that
depending on the sprayer tip angle, you get different pressures: from take the hide off a moose to rinse grandma
it's most like this one (tho this is Dewalt-badged): https://www.homedepot.com/p/DEWALT-3...3123/319720758
-
08-15-2022, 05:12 PM #7178Registered User
- Join Date
- Oct 2010
- Posts
- 1,958
I’m in the same boat and have decided just to go with the cheapie Sun Joe electric model. Around 2000 psi is enough for light duty jobs like you described and they’re under $200 online.
And for infrequently used appliances like this I hate gas motors. It’s such a hassle having a gas can around, then not leaving gas in the machine in the hot garage, then winterizing everything. I’ve replaced multiple carbs on my chainsaw and am converting all my tools over to electric.
-
08-15-2022, 05:15 PM #7179
-
08-15-2022, 05:17 PM #7180
I likely have that Sunjo and it has been good to me for 4-5 years. That said, the concrete in the side yard really needs a solid cleaning and the Sunjo isn't up to the task in any sort of expedient manner. I need way more PSI.
That is odd El Chup as I have those GFCI plugs around the yard and have no tripping issues.
-
08-15-2022, 05:47 PM #7181
We have an electric Ryobi 1800psi 1.2 gpm that works ok cleaning the deck after the masons got some mortar on it. It's lunchbox size, not inlcuding hose, cord, and wand, so light and easy to move around. It replaces a standup Husky that leaks badly and doesn't produce any more pressure and is much heavier. I don't know how it compares to a hose attachment high pressure nozzle. The deal with all these things is that you get pressure at the expense of flow, so I usually rinse with a low pressure, high volume hose after pressure washing. If you want pressure and volume both I think you need gas.
-
08-15-2022, 06:37 PM #7182Registered User
- Join Date
- Nov 2007
- Location
- So. VT
- Posts
- 2,829
The electric sun joe gets rave reviews and is probably fine for your use.
I bought a Simpson with their engine (Honda clone). I'm on year 3 with it, I wash the house 1x per year, the tractor and vehicles a couples times a month on average. I needed the higher pressure to run a wet sand blast, happy with it but I know the cheap(ish) pump will burn out.
-
08-15-2022, 06:44 PM #7183
-
08-15-2022, 06:49 PM #7184
-
08-15-2022, 06:51 PM #7185
This is uncanny.
-
08-15-2022, 07:43 PM #7186
If you're just cleaning cars, bikes, plastic, etc, something around 2000 psi would be fine. If you want to clean wood or concrete, you'll want at least 2500 psi. Personally, I like the 3000 range. Keep in mind, you can typically throttle down gas models to lower the pressure.
Currently I have a 600 psi, 18V battery powered Ryobi model. It's perfect for rinsing off the fatbikes in the winter, paddleboards in the summer. It can get it's water from the hose, a 5 gallon pail, or even a soda bottle which makes it handy in the winter when you've already turned off the outside faucet.
If I have a larger job to tackle in the winter, I have a 1200 psi battery powered SunJoe. It has an integrated bucket that I'll take inside to fill with hot or warm water for extra punch in the winter.
Finally I just picked up this 3600 psi gas powered Ryobi model. It's a fucking beast. It'll easily take the paint off the car if you're not careful. It's so effective and easy to use I find myself constantly finding jobs around the house to use it on.
RE: Gas vs Electric, as long as you take reasonable care of a gasoline engine, there's no reason to stay away from them. Use non-ethanol gas, shut the fuel off when you're done using them and drain them at the end of the season. It's really not that hard. I also run a can of Pump Saver through the system before I put it up at the end of the year. It's cheap insurance if you're worried about the pump cracking when temperatures get below freezing.
-
08-16-2022, 05:10 AM #7187Registered User
- Join Date
- Nov 2007
- Location
- So. VT
- Posts
- 2,829
-
08-16-2022, 08:26 AM #7188
I wonder if Sunjoe and Ryobi come from the same factory, or just use the same paint.
One nice thing about the hand held models is that there small enough to store in a heated space if desired.
-
08-16-2022, 08:51 AM #7189Registered User
- Join Date
- Dec 2010
- Posts
- 3,932
are integrated outdoor speakers on the patio worth it, or would a $100 bluetooth portable speaker do the same thing for a few hundred less?
-
08-16-2022, 09:27 AM #7190
Home Remodel: Do, Don'ts, Advice
Do you have speakers installed elsewhere in the house? So you can have seamless sound from the kitchen, to the dining room, to the yard?
Do you want that?
If not, just get a nice Bluetooth speaker.
Sent from my iPhone using TGR ForumsBest Skier on the Mountain
Self-Certified
1992 - 2012
Squaw Valley, USA
-
08-16-2022, 10:01 AM #7191Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,040
-
08-16-2022, 10:06 AM #7192
-
08-16-2022, 10:08 AM #7193
Home Remodel: Do, Don'ts, Advice
A little late to the conversation on pressure washers, but it all depends on use. A couple vehicles at a time, house or patio once a year, cleaning soft surfaces like wood - electric is fine. A fleet of vehicles, deep cleaning concrete, heavy grunge that needs both volume and pressure to remove and flush away, go gas. A lot depends on the nozzle head as well. Get a variety, and change for new every couple years. I used a 2200psi 2gpm electric with one of those rotating stripper heads, and it cleaned my cedar panel fence back to new. Had to be careful to not remove wood even with that light model using that scrubber head.
The note about maintenace is spot on. Poor fuel, not servicing when specified, not wintering well will kill a gas (or electric with a winter freeze) fast. I think work has replaced ours 3 times over the past decade cause some numbnuts forgot to drain it before a cold snap.
We currently use a 3000psi, 2.5gpm pump paired with a 187cc Honda motor for the fleet, and it can run all day, but it is loud and thirsty. Needs new nozzle heads badly.
But nothing beats the 2” hose out back, delivering about 50gpm. What would take that pressure washer an hour to remove spring gumbo mud off a vehicle’s undercarriage takes that fire hose 15min. Thankfully it’s on its own cistern and pump, it would shock the well and burn out the well pump in no time!
-
08-16-2022, 10:33 AM #7194Registered User
- Join Date
- Feb 2008
- Posts
- 2,734
-
08-16-2022, 11:17 AM #7195
-
08-16-2022, 11:34 AM #7196
-
08-16-2022, 04:37 PM #7197
-
08-16-2022, 06:08 PM #7198
So far we have a recommendation for a 10 year old Harbor Freight pressure washer and a collapsible hose. FFS.
-
08-16-2022, 06:09 PM #7199
Thanks for all the insight gang.
I think a smaller electric unit will do the trick for my infrequent needs. But I appreciate the psi breakdowns, etc (touring sedan…..you may have a problem )skid luxury
-
08-16-2022, 06:32 PM #7200
I have this ryobi one. Use it a few times a year.
https://www.homedepot.com/p/RYOBI-19...TVNM/311223300
It’s fine for washing siding, cleaning our brick planter box, and washing cars.
Bookmarks