Page 7 of 7 FirstFirst ... 2 3 4 5 6 7
Results 151 to 157 of 157
  1. #151
    Join Date
    Mar 2009
    Posts
    2,172
    I'd just seal that one up and clamp it. Do your best to get epoxy to wet out the delam

  2. #152
    Join Date
    Mar 2009
    Posts
    2,172
    Does the sidewall sound hollow if you tap it w/ a screwdriver handle?

  3. #153
    Join Date
    Mar 2009
    Posts
    2,172
    Tuco's Edgewerx back in businessClick image for larger version. 

Name:	PXL_20210330_231030773.jpg 
Views:	41 
Size:	2.16 MB 
ID:	369808Click image for larger version. 

Name:	PXL_20210330_231034708.jpg 
Views:	41 
Size:	1.00 MB 
ID:	369809
    Straighten edgeClick image for larger version. 

Name:	PXL_20210330_231902756.jpg 
Views:	38 
Size:	1.14 MB 
ID:	369810Click image for larger version. 

Name:	PXL_20210330_233035670.jpg 
Views:	38 
Size:	1.21 MB 
ID:	369811
    Marking opposing ski to cut matching sidecut to repair mayerialClick image for larger version. 

Name:	PXL_20210330_235216436.jpg 
Views:	38 
Size:	1.31 MB 
ID:	369812Click image for larger version. 

Name:	PXL_20210330_235400106.jpg 
Views:	36 
Size:	1.76 MB 
ID:	369813
    Line up repair material to remove damaged baseClick image for larger version. 

Name:	PXL_20210331_001854495.jpg 
Views:	36 
Size:	1.57 MB 
ID:	369814

  4. #154
    Join Date
    Mar 2009
    Posts
    2,172
    More pics coming later

  5. #155
    Join Date
    Jan 2019
    Location
    59715
    Posts
    3,095
    Shark attack?

  6. #156
    Join Date
    Mar 2009
    Posts
    2,172
    Fellow maggots spliboard, but yes

  7. #157
    Join Date
    Nov 2020
    Posts
    1

    Any tips?

    Whacked my ski good.

    Both edges are blown out a little, but seem to be solid still-- so I just plan to bend those back into place and then put two long base material patches down both sides of my ski. Not sure about delamination/if I should do anything special about the fact that the base is bubbled 1-2mm lower than the edge (you can also see the stress marks in the sidewall, which spook me a little).

    This is my first real surgery outside of binding mounting/ski tuning so I'm a little nervous to just dig in with a knife but this thread is super helpful so thank you! Just wondering if you see anything I should pay particular attention to here or if it is pretty straightforward? Also, is there anywhere to pick up base materially locally (REI, maybe my local ski shop will sell it, I dunno) or should I get the stuff from tognar? Thanks in advance.

    I am working on figuring out how to get the pics embedded on here. Maybe can't post pics because I'm new? They are at imgur(not .net)/a/ID8cINt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •