Results 51 to 75 of 84
Thread: Beast 14
-
12-04-2014, 06:00 PM #51Registered User
- Join Date
- Sep 2013
- Posts
- 103
Hi, I just received my Beast 14's with the 105 brake. These my 1st Dynafits. A couple of questions:
1) How wide a ski would a 105 brake fit? Would a V-Werks Katana 112 work?
2) The locking lever on the toe piece doesn't seem to be solid laterally - there's a slight plasticky/chattery sound when wiggling it. Since it is the same on both toes, I presume this is normal. I wonder if it is to accommodate for temperature expansion of the axis to which the lever is attached. Kind of weird since it does not inspire much confidence in durability (I have an Onyx and no such thing there)
-
12-04-2014, 06:15 PM #52
-
12-05-2014, 08:17 PM #53
-
12-11-2014, 02:54 PM #54Registered User
- Join Date
- Oct 2014
- Posts
- 3
Any idea how these are going to perform on inbounds East Coast hard pack? I'm considering getting them but this unknown has me hesitant to pull the trigger on them.
-
12-12-2014, 06:16 PM #55Registered User
- Join Date
- Dec 2014
- Posts
- 2
-
04-04-2015, 06:22 PM #56
Anybody actually ski the things who can compare them to the 16's?
-
04-05-2015, 01:54 AM #57
Been on the 14's the second half of the season. ca 20 days. Haven't been on the 16's so cant compare that but to me they feel bomber. Release when they should, no chattery feel, very connected and secure. I have them on 185 cochise's and weigh 67 kg sans gear, and I ski moderately fast fwiw.
-
04-05-2015, 06:09 AM #58
Thanks. Next question.
Would the 120 brakes stick out too far on 98 waisted skis, or do they retract pretty well? I'd be swapping bindings 98 and 115 waisted skis.
-
04-05-2015, 06:14 AM #59
-
12-31-2018, 09:15 AM #60
Anyone else ever have issues with the first riser - the darker grey one - getting "locked" into the brake? As soon as I step on the riser it clicks into place behind the brake, and then it is quite a struggle to get it out of there and back to ski mode. I can wedge my pole tip under it and pry up from the ski to pop the riser free, but this just seems like way too violent of a motion to be correct. Thoughts?
I think the potato gun proved the stability.
-
12-31-2018, 09:46 AM #61
-
12-31-2018, 05:46 PM #62
I still pry away at that first riser. Sure it's loosened up over time but it sure is stiff
-
01-02-2019, 09:06 AM #63
Try this:
Keep your toes in and locked. Raise the lighter high riser to meet your boot sole at an angle (see photo). Step down on the high riser. This will push the heel unit back in its track against the forward pressure spring, and because the brake is fixed will release the lower riser.
You will probably have to fiddle around with the angle of the riser for a little while as it takes some coordination between pole tip and boot pressure. Err on the steeper side. You'll probably lock the high riser in the first few attempts, but it gets really quick and easy w practice. It will take a good deal of pressure on the riser, but use consistent, smooth force, slowly ramping up. Stomping down will just cause the riser to engage or jump out of the way, you want to start to overcome the spring and any heel friction while maintaining your boot's grip on the riser. Stomping on an unsupported piece of plastic is probably never a good idea anyway (but we are already prying at them). After doing this, I step down again to engage ski mode and then strip skins for a really fast transition and no wallowing in snow. When you get the hang of it, the beast transitions as easily as any dynafit.
I've been doing this for a couple years after a friend showed me (previously a pry-er), I haven't noticed any problems in the forward pressure. When you get the hang of it, it works so smoothly I swear this was a design feature that dynafit didn't bother translating to english. But if anyone knows better let me know.
-
01-02-2019, 11:29 AM #64
That's a great tip. Can't wait to try it.
Sent from my iPhone using TGR Forums
-
01-02-2019, 11:36 AM #65Registered User
- Join Date
- Aug 2007
- Location
- United States of Aburdistan
- Posts
- 7,281
WHOA. Thanks, i had no idea!
-
01-03-2019, 09:07 AM #66
That's the ticket! Took me a couple tries at first, it took more downward pressure with the the heel than I anticipated. When I just pressed with some weight the whole heelpiece (including locked riser and brake) just moved backwards, but then with a little more pressure, viola! Thanks a tonI think the potato gun proved the stability.
-
01-03-2019, 08:39 PM #67
Glad it worked for ya!
-
01-03-2019, 10:32 PM #68
Used your tip today. Worked 1st try, very easy on a side hill. Can't believe this feature hasn't been widely shared.
Sent from my iPhone using TGR Forums
-
01-04-2019, 09:23 PM #69
Yeah it seems like it must have been designed in. Seems like it was a casualty of “user manuals” that just serve as a legal warning to take bindings to an authorized dealer before each run.
-
01-15-2019, 10:45 AM #70
These things are being unloaded for next to nothing now. Is there a problem with this binding or just better alternatives out there now?
-
01-15-2019, 10:49 AM #71Registered User
- Join Date
- May 2017
- Location
- Zurich, Switzerland
- Posts
- 420
Some people argue it is still the be(a)st for downhill. Get one if you don't need skinning without raisers and don't mind the weight. I never skied them but regret not to have profited from the low price the last time I needed bindings.
-
01-15-2019, 11:11 AM #72Registered User
- Join Date
- Jul 2008
- Location
- High and dry
- Posts
- 53
Blurred, you seen them cheap somewhere ? Backcountry blew them out at 175 but I was too slow to pick up on that deal. Would like to get a pair if I found 'em at the right price.
-
01-15-2019, 11:47 AM #73
seems like I should revive my gear swap listing
Aggressive in my own mind
-
01-16-2019, 05:49 PM #74
So I was trying to show my buddy the trick to return to ski mode today and he broke the taller heel riser. Anyone know where to get a replacement?
Sent from my iPhone using TGR Forums
-
01-16-2019, 06:59 PM #75
Bookmarks