Results 1 to 25 of 74
-
11-06-2012, 06:10 PM #1
Feeler - Group Order JesterFit Swap Plates (Binding Freedom)
Last edited by AlpenChronicHabitual; 11-12-2012 at 07:51 AM. Reason: Edited to add Jon's comments from a post below
-
11-06-2012, 08:20 PM #2glued
- Join Date
- Jan 2011
- Posts
- 202
I'd be down for 1 pair to start, and maybe more later as long as there's not some new hole pattern with the jester/griffon and it works with comforts.
Would want to get the plates in within a reasonable time frame so I don't have to hold off too long mounting some skis.
-
11-06-2012, 08:22 PM #3
i don't need any, but they should be green.
In search of the elusive artic powder weasel ...
-
11-06-2012, 09:00 PM #4Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,547
IF they had the hole for the demo jester/griffon then I would be interested.
-
11-06-2012, 09:02 PM #5
CaliBrit, I haven't seen a mounting template for the demo version.
I think Jon will need to look at that to know if it's possible.
-
11-06-2012, 10:24 PM #6
Did anyone ever figure out if the new jester has a different hole pattern? I might be interested in an older one, but not the new hole pattern.
-
11-06-2012, 10:42 PM #7
http://photos.imageevent.com/banos/l...dDemo_test.pdf
I'd be interested if the Demo hole was included.. just like the 5th hole is required for Duke/Barons'To quote my bro
"We're not K2. We're a bunch of maggots running one press at full steam building killer fukkin skis and putting smiles on our friends' faces." ' - skifishbum '08
"Adios Hugh you asshole" - Ghostofcarl '14
believe...
-
11-07-2012, 08:02 AM #8Banned
- Join Date
- May 2007
- Location
- Sandy, Utah
- Posts
- 14,410
Same hole pattern as the schizo or no? I would likely be in if its the same hole pattern. Thanks
-
11-07-2012, 11:28 AM #9
The entire Jester platform shares a common mounting hole pattern.
The following models are included:
Jester Pro
Jester 16
Griffon
Squire
All Schizo and demo variants (+1 hole behind the toe)
IMO it would make sense to configure the toe plate like the DynaDuke so the demo/schizo are also compatible (subject to confirmation from Jon).
-
11-07-2012, 04:00 PM #10
Hi guys,
* They will be either green or gold (I reserve the right to choose based on who has the most interesting argument for one or the other).
* I will include full compatibility for regular OR demo bindings. So that includes everything in ACH's post above.
*We need 25 pairs preordered to do the manufacturing run. They will become a standard product if made, but I need to be sure there is demand - thus the mini "kickstarter" group buy.
*Price for the group buy is $105/ea. If enough people confirm they are in here in the thread, I'll put an official pre-order up on the site and people can go on there and pay and then wait excitedly for the manufacturing run. Should take about 6 weeks to make them.
*I will design them, and then post up CAD renderings in the next week or so if there is enough interest.
Thanks all!
-
11-08-2012, 09:38 AM #11
If they would have the same mounting pattern as the SollyFits I'm in and I am psyched.
-
11-08-2012, 09:59 AM #12
-
11-08-2012, 12:37 PM #13
I think he means the plate mounting pattern. The four screws per plate
-
11-08-2012, 12:42 PM #14
^^^i think he means the 8 screws that attach plate to ski.
Some peeps run inserts and swap plates instead of the bindings
Sent from my DROID RAZR using TGR Forums
-
11-08-2012, 01:11 PM #15
-
11-08-2012, 02:08 PM #16Banned
- Join Date
- May 2007
- Location
- Sandy, Utah
- Posts
- 14,410
I'm in on a plate that work with schizo if we get enough peeps.
Thanks.
-
11-08-2012, 08:39 PM #17
So far it looks like we have 10 if I include interest from other non mag types.
-
11-08-2012, 09:59 PM #18Registered User
- Join Date
- Dec 2004
- Location
- Colorado
- Posts
- 858
-
11-09-2012, 02:44 PM #19Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,547
Wonder how the demo plate will line up on top of the fit plate.
-
11-09-2012, 04:12 PM #20
i might be interested in the future, but can't commit the money now
-
11-12-2012, 09:25 PM #21
Bumping for JesterFits...
We need 15 more to get an order going.
-
11-12-2012, 10:13 PM #22glued
- Join Date
- Jan 2011
- Posts
- 202
buump..........
-
11-13-2012, 02:27 PM #23
y'all need to get on board. if you ski in AT boots most of the time you want a jesterfit setup.
-
11-13-2012, 05:19 PM #24Registered User
- Join Date
- Dec 2009
- Location
- Sun Valley, ID
- Posts
- 2,547
-
11-13-2012, 06:29 PM #25
When will decision be made for which other plates (4 per plate) screw pattern would match jesterfit: dynaduke or sollyfit
Comparing the two, it seems that mid-sole line for dynaduke is a hair over 2 cm in front of sollyfit mid-sole at the same bsl (using the same front plate holes).
My example starts with sollyfits. To go from sollyfit to dynaduke with re-using the same front plate holes, looks like dynaduke rear plate holes must be 2 cm forward of sollyfit rear plate holes. This results in the mid-sole line moving 2 plus cm forward, which is the desired outcome for this swap.Aggressive in my own mind
Bookmarks