Page 1 of 2 1 2 LastLast
Results 1 to 25 of 27
  1. #1
    Join Date
    Jan 2004
    Location
    the Low Sierra
    Posts
    17,820

    official shop callout: wrong hole

    plugs

    I know some of you were following my hole plug woes in this thread, and basically the shit never got fixed. I've been back to the fucking shop over and over again and nothing seems to help. Well today I found out why. I went to another fucking shop to have them evaluated by Christ, who informed me that not only are the plugs the wrong color, but they were about 2 sizes too big too, we're talking easily .0005+ centimeter hole fit here. He was in complete disbelief that Jeremy at the shop would do such a poor fit job, as he has referred many customers there when he didn't have what they needed and has seen good things. He was even more appalled that instead of recognizing the mistake and getting the right plug size and color, they kept doing little bullshit band-aid fixes to try and cover it up, like grinding/stretching the holes, the internal frame, coloring the plugs with a Sharpie pen, and plug mods (and charging me for it). So basically I'm well over $1200 into hole plugs that are completely useless. The fucking shop sold me a 27.5 PlugTech RX 130 and after spending hours at the other fucking shop today looking at different colors, plug fitting, etc, Christ is positive I should be in the same plugs in a 25.5. This explains why the color was all wrong. He also made me a new PlugTech holes, and all plug work free, which all combined still will cost less then the fucking shop did with just the holes, stock plugs, and the wrong color. At the fucking shop, we tried on two holes: a 26.5 Plugger and a 27.5 PluTech RX 130. At the other fucking shop, I tried just about every fucking hole in every fucking size before Christ settled on one, which we played with for quite a while just to be sure. Basically, the fucking shop did a super quick, half assed job fitting my holes and plugging them. I gave them every possible opportunity to plug my holes right. I want nothing to do with them anymore and strongly advise anyone going to them for hole work to head over to the other fucking shop instead. Christ guarantees his fits with 100% satisfaction or money back.

    What is the possibility of getting my money back from the fucking shop? I'll be heading back over there sometime next week to demand a fuckingrefund, but given the amount the holes have been plugged and modified, any way this will happen (it fucking should)?

    Fuck you fucking shop.





















































































































    I didn't believe in reincarnation when I was your age either.

  2. #2
    Join Date
    Dec 2009
    Posts
    7,167
    WONGMUTHAFUCKINGFOWUMJONG!!!!!























    heh, good one

    rog

  3. #3
    Join Date
    Dec 2007
    Location
    monument
    Posts
    6,929
    did you do hole fit test?


    what size hole do you normally fill?


    hole fit is personal, but i like a nice even amount of pressure on all sides, with maybe just a bit of resistance upon penetration.
    In search of the elusive artic powder weasel ...

  4. #4
    Join Date
    Feb 2010
    Posts
    237
    Yeah, I normally like to size down in my holes but you have to be careful. Sizing down too much can get you in some serious trouble. Some people like to squirt some lube on if can't get your plug in there initially but personally I've found a little spit does the trick.
    Quote Originally Posted by bite me View Post
    Texas is better than Hell? Maybe I'm not familiar enough with Hell, but it would be hard to imagine it being worse than Texas.

  5. #5
    Join Date
    Apr 2006
    Location
    Bravo Delta.
    Posts
    6,135
    BWAAAAAAAAAA HAAAAAAA HAAAA HAAAA.


    this thread rules.
    Quote Originally Posted by Socialist View Post
    They have socalized healthcare up in canada. The whole country is 100% full of pot smoking pro-athlete alcoholics.

  6. #6
    Join Date
    Jan 2004
    Location
    the Low Sierra
    Posts
    17,820
    Quote Originally Posted by pfluffenmeister View Post
    did you do hole fit test?


    what size hole do you normally fill?


    hole fit is personal, but i like a nice even amount of pressure on all sides, with maybe just a bit of resistance upon penetration.
    fuck - do they have a machine to do hole fit test? I don't even know what my DIN is
    I didn't believe in reincarnation when I was your age either.

  7. #7
    Join Date
    Feb 2008
    Location
    Sandy
    Posts
    781
    I lol'd 5678

  8. #8
    Join Date
    Oct 2010
    Location
    Denver, CO
    Posts
    25
    I'm a little confused how you could go into the shop having *no idea* what your plug size was?

    I mean, really, even a cursory search around the internet will give you plenty of instruction on plug/hole fitting. There are even videos on the subject if reading poses difficulty for you.
    Maybe if you took your headphones out, you'd realize the girl next to you on the lift is hitting on you.

  9. #9
    Join Date
    Oct 2005
    Location
    Sandy
    Posts
    5,179
    I HATE it when I'm trying to plug someones holes and they tell me how someone else does it and how much better they are at it.
    When life gives you haters, make haterade.

  10. #10
    Join Date
    Sep 2011
    Location
    here & there
    Posts
    1,404
    I plugged two holes last night, one pink, one brown...




    ...in that order (you don’t want to mix the pink with the brown, trust me).
    "In a perfect world I'd have all 10 fingers on my left hand, so I could just use my right hand for punching."

  11. #11
    Join Date
    Feb 2008
    Location
    here and there
    Posts
    18,593
    Look at it this way the shop did a crappy job of plugging your skis but they did a A1 job plugging you.


    BTW does anyone know where I can get some extra large holes?
    watch out for snakes

  12. #12
    Join Date
    Nov 2005
    Location
    Mt Baldys shoes
    Posts
    2,983
    Take it to Tech Talk....
    And you should know this shit! Look at your post count.What the hell do you do here,look at porn?

  13. #13
    Join Date
    May 2006
    Location
    Eagle County
    Posts
    12,618
    PM Rontele
    ROLL TIDE ROLL

  14. #14
    Join Date
    Feb 2004
    Posts
    7,221
    If you have to take your plugs to a shop in the 1st place and then come on TGR crying about how they fucked up your plugs, well then, you should pretty much quit skiing and stick to just pretending you do on the interwebz.
    Security is mostly a superstition. It does not exist in nature... Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing. -Helen Keller

  15. #15
    Join Date
    May 2011
    Location
    Truckee & Nor Cal
    Posts
    15,726
    Official shop callout and you don't name the shop?

    EDIT: Umm... yeah.
    Last edited by TahoeJ; 10-08-2012 at 09:31 PM. Reason: It was Monday

  16. #16
    Join Date
    Feb 2004
    Posts
    7,221
    Quote Originally Posted by TahoeJ View Post
    Official shop callout and you don't name the shop?
    I think it was either Ripoff Loft or Bendover Barn.
    Security is mostly a superstition. It does not exist in nature... Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing. -Helen Keller

  17. #17
    Join Date
    Dec 2005
    Location
    sandy, sl,ut
    Posts
    9,326
    I guess boot fitting is better work than carpentry these days.
    __________________________________________________ __________________________________________________ ________________
    "We don't need predator control, we need whiner control. Anyone who complains that "the gummint oughta do sumpin" about the wolves and coyotes should be darted, caged, and released in a more suitable habitat for them, like the middle of Manhattan." - Spats

    "I'm constantly doing things I can't do. Thats how I get to do them." - Pablo Picasso

    Cisco and his wife are fragile idiots who breed morons.

  18. #18
    Join Date
    May 2008
    Location
    soaring on the shitwinds
    Posts
    7,322
    Hahahahahahaha oh god I can't stop laughing hahahahaha
    "If you limit your choices only to what seems possible or reasonable, you disconnect yourself from what you truly want, and all that is left is a compromise." -Robert Fritz

    Quote Originally Posted by skifishbum View Post
    not enough nun fisters in that community

  19. #19
    Join Date
    Feb 2008
    Location
    In a parallel universe
    Posts
    4,756
    All the thread needs now is Greg from AZ.

  20. #20
    Join Date
    Feb 2008
    Location
    here and there
    Posts
    18,593
    Quote Originally Posted by powder11 View Post
    I think it was Bendover Barn.
    FTW

    23456
    watch out for snakes

  21. #21
    Join Date
    Jan 2009
    Posts
    1,009
    Good thing this is a 1st world problem.

    otherwise i'd be telling you to go get that rapid hiv test

  22. #22
    Join Date
    Mar 2007
    Location
    O-Town
    Posts
    2,664
    I deserve this.
    All I know is that I don't know nothin'... and that's fine.

  23. #23
    Join Date
    Jan 2008
    Location
    the gach
    Posts
    5,663
    Quote Originally Posted by Dickeymotto View Post
    I deserve this.
    It's big of you to admit this. Now if only it would fucking snow already.
    But Ellen kicks ass - if she had a beard it would be much more haggard. -Jer

  24. #24
    Join Date
    Feb 2006
    Location
    New England
    Posts
    12,098
    Quote Originally Posted by Dickeymotto View Post
    I deserve this.
    Internet group therapy...


    Funny as hell and free.
    Screw the net, Surf the backcountry!

  25. #25
    Join Date
    Jan 2004
    Location
    the Low Sierra
    Posts
    17,820
    funny thing is I posted the other thread almost a year ago to make fun of people who don't get it, then Dickeymotto storms in....
    I didn't believe in reincarnation when I was your age either.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •