Results 4,176 to 4,200 of 6842
-
12-02-2020, 11:46 PM #4176
-
12-03-2020, 02:18 AM #4177
job security and as much ot as you want is never teriffying the outdoor industry economy is impressive right now
which is nice
we scored a mils worth of every rossi experiance and the they make
same with out elan smu were calling truflex this season so theres a lot of slap em on the track and ship it
were runnin 2 phantom wax boxes now and think i got 9or 10 out yesterday
i use steel wool and superglue for spinners on kids skis with a din less than 3
any other spinners git helicoils it takes less time than that ghetto shit and is proven
and i turn the new kids clutch's down another notch
it would be way harder if the current ski conditions were not sub marginal"When the child was a child it waited patiently for the first snow and it still does"- Van "The Man" Morrison
"I find I have already had my reward, in the doing of the thing" - Buzz Holmstrom
"THIS IS WHAT WE DO"-AML -ski on in eternal peace
"I have posted in here but haven't read it carefully with my trusty PoliAsshat antenna on."-DipshitDanno
-
12-03-2020, 06:54 AM #4178
what do you think of the phantom wax?
I didn't believe in reincarnation when I was your age either.
-
12-03-2020, 07:27 AM #4179
-
12-03-2020, 07:28 AM #4180
I think it works well for maritime (higher moisture content) snowpacks and is great if you don't wax your skis often and have the money. We are also running two cure stations full time. I would have done 3 pairs this season except for the backlog of paying customers; last season I did 2 pairs of my own skis.
-
12-03-2020, 07:34 AM #4181
I thinks there's a thread with my ramblins
It doesn't hurt cept core shots are a bit more difficult to bond
It helps more so warm wet spring
But no the never wax again dental sauce ain't
Gonna stop the tech with well waxed and tuned skis from blowing by you on the flats
Even the dps rep admitted that the never wax again thing was stupid
But whose gonna pay that for a wax enhancer
I will say I've probably done a few hundred
And no one has said this is bullshit and asked for a refund
And if Bob I never wax my skis MC says it works
That says a lot"When the child was a child it waited patiently for the first snow and it still does"- Van "The Man" Morrison
"I find I have already had my reward, in the doing of the thing" - Buzz Holmstrom
"THIS IS WHAT WE DO"-AML -ski on in eternal peace
"I have posted in here but haven't read it carefully with my trusty PoliAsshat antenna on."-DipshitDanno
-
12-03-2020, 07:36 AM #4182
I wax.
I didn't believe in reincarnation when I was your age either.
-
12-03-2020, 07:40 AM #4183
-
12-03-2020, 07:43 AM #4184
Where I notice it is on our 2 week bc hut trip road trip
When I dont got paid to wax my skis on the reg
And I doubts I'll ever work for a shop that can't afford an uv future waxer
I don't mind old school scraping at home but that shits becoming as outdated as dripping p tex candles"When the child was a child it waited patiently for the first snow and it still does"- Van "The Man" Morrison
"I find I have already had my reward, in the doing of the thing" - Buzz Holmstrom
"THIS IS WHAT WE DO"-AML -ski on in eternal peace
"I have posted in here but haven't read it carefully with my trusty PoliAsshat antenna on."-DipshitDanno
-
12-03-2020, 07:56 AM #4185
-
12-03-2020, 07:59 AM #4186
I also kinda like the time I spend waxing as long as it’s not 11pm the night before I’m leaving on a trip. Super relaxing.
Sent from my iPhone using TGR Forums
-
12-03-2020, 08:07 AM #4187
might give it a go if I’m ever near a place that does it
I didn't believe in reincarnation when I was your age either.
-
12-03-2020, 08:23 AM #4188
Anyone know the limit on the extension arms for the heel piece on a pivot? After spending a bit more time making sure my forward pressure was correct, I’m pretty sure I’m on the edge here with the existing mount location.
I can see all three bands and right on the edge of seeing threads. Is there an official limit suggested by Look? I can’t seem to find that info, but I’m sure I have read it in the past.
-
12-03-2020, 08:58 AM #4189Registered User
- Join Date
- Mar 2020
- Posts
- 205
One somewhat stiff spinner on a P18 mount... Must have drilled a bit crooked. Anything to be concerned about? Or just run it
-
12-03-2020, 09:14 AM #4190King potato
- Join Date
- Feb 2011
- Location
- BC
- Posts
- 1,926
-
12-03-2020, 09:15 AM #4191Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 30,885
Lee Lau - xxx-er is the laziest Asian canuck I know
-
12-03-2020, 09:31 AM #4192
if i evers makes it to the metalhead holy lands and i need to pay a retired burnout shuttle monkey
ill leave a few in the ashtray with the roachs as a tip"When the child was a child it waited patiently for the first snow and it still does"- Van "The Man" Morrison
"I find I have already had my reward, in the doing of the thing" - Buzz Holmstrom
"THIS IS WHAT WE DO"-AML -ski on in eternal peace
"I have posted in here but haven't read it carefully with my trusty PoliAsshat antenna on."-DipshitDanno
-
12-03-2020, 09:50 AM #4193Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 30,885
-
12-03-2020, 10:00 AM #4194
-
12-03-2020, 02:35 PM #4195
I have 3 setups with pivots and they all touch the arms with both pair of boots I have. I swear I recently stumbled upon some literature for pivot/fks that showed there was supposed to be contact there, but I can't find it again so I could be mistaken. Don't grind your boots.
-
12-03-2020, 03:13 PM #4196
Late to the party on this. I see no need for a 4.1mm bit if you own a 12AB tap.
Here's why ...
You should always tap metal (you knew that). The good news is that you can tap a hole drilled with a 3.6mm bit. Ergo, you'll never drill too large a hole if all you use is a 3.6 ;-)
.. ThomGalibier Designcrafting technology in service of music
-
12-03-2020, 03:44 PM #4197
Yeah it's like another "click" (1/2 turn?) and I see threads which seems like I'm pushing it. Is the intent of the hashes that the innermost and outermost are the limits of adjustment? Does anyone know the official word on that? Any techs in here?
First time messing with brand new pivots and the dildo seems to rotate a bit harder/less with the boot clicked in but the forward pressure indicator is right on, it passes the flips up at 50% test, and the slight movement of brakes when you lift the press on the boot trick. Seems to be set similar to my others just rotates less. If I have to back these off any more to get the correct forward pressure, I think a mount is in order.
-
12-03-2020, 11:36 PM #4198Registered User
- Join Date
- Apr 2020
- Posts
- 14
-
12-04-2020, 12:38 AM #4199
nice
I didn't believe in reincarnation when I was your age either.
-
12-04-2020, 05:22 AM #4200"When the child was a child it waited patiently for the first snow and it still does"- Van "The Man" Morrison
"I find I have already had my reward, in the doing of the thing" - Buzz Holmstrom
"THIS IS WHAT WE DO"-AML -ski on in eternal peace
"I have posted in here but haven't read it carefully with my trusty PoliAsshat antenna on."-DipshitDanno
Bookmarks