Results 1 to 10 of 10
  1. #1
    Join Date
    Nov 2004
    Location
    San Francisco, CA
    Posts
    2,141

    PSA: Salomon STH 14s w/ 115mm Brake for $175 shipped

    Not a horde worthy deal but if you are looking for solid new clamps with wide brakes, this is a legit deal. Picked up a pair today - thought I would pass it along:

    http://www.o2gearshop.com/catalog/pr...ducts_id=15830

  2. #2
    Join Date
    Nov 2002
    Location
    Deep Playa
    Posts
    4,798
    Sweet. thx. Would the 115mm be compatible with a 130 waisted ski without too much bending?

  3. #3
    Join Date
    Apr 2006
    Location
    Wasatch
    Posts
    5,092
    hey bend easy, 7mm per side
    I need to go to Utah.
    Utah?
    Yeah, Utah. It's wedged in between Wyoming and Nevada. You've seen pictures of it, right?

    So after 15 years we finally made it to Utah.....


    Thanks BCSAR and POWMOW Ski Patrol for rescues

    8, 17, 13, 18, 16, 18, 20, 19, 16

    2018/2019 (24/32)

  4. #4
    Join Date
    Nov 2002
    Location
    Deep Playa
    Posts
    4,798
    Quote Originally Posted by whyturn View Post
    hey bend easy, 7mm per side
    Cool... thanks B! I didn't want to have to redrill the skis I bought from you since we have the same BSL

  5. #5
    Join Date
    Oct 2009
    Location
    Deadmonton, AB
    Posts
    120
    Anyone know if these mount up the same hole pattern as STH 12s (non-driver toe)?
    Thinking of remounting a pair of skis with the 14s and switching the 12s to my wife's new skis...but don't want add any holes.

  6. #6
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    997
    Not sure if they match, but if they don't you'll only need to drill two new holes. Everything except the top holes should match. Non-driver has one hole in the middle. Driver should have two holes on the sides.

  7. #7
    Join Date
    Oct 2003
    Location
    Lapping the pow with the GSA in the PNW
    Posts
    2,986
    Quote Originally Posted by bern43 View Post
    Not sure if they match, but if they don't you'll only need to drill two new holes. Everything except the top holes should match. Non-driver has one hole in the middle. Driver should have two holes on the sides.
    What he said and I have I've done it before. Plug the front center-screw from the non-driver toe and drill two front holes for the toe pieces. The back holes on the toe pieces and all the heel piece holes line up.

  8. #8
    Join Date
    Aug 2008
    Location
    Morrisville, VT
    Posts
    21
    Raps, thanks for posting this. Pulled the trigger on a pair.

  9. #9
    Join Date
    Feb 2007
    Location
    Idaho
    Posts
    930
    fyi...not everybody thrilled with this shop

    https://www.tetongravity.com/forums/s...r-shop-warning

  10. #10
    Join Date
    Nov 2004
    Location
    San Francisco, CA
    Posts
    2,141
    Looks like there are a lot of negative things to say about 02 buuut after a few weeks I actually have the bindings in hand!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •