Results 651 to 675 of 1053
Thread: Cast Iron Skillet
-
10-23-2021, 07:15 PM #651
If this was for me, I thought induction was ok. Bit better than regular electric. We didn't have any pans that didn't work with it, so that was a bonus. I did find that many of the pans were not completely flat, which lead to hot spots. I am looking forward to the gas unit for this main reason. The 20,000 BTU middle burner will be killer for boiling water. That took forever on the induction unit.
-
10-23-2021, 09:14 PM #652Registered User
- Join Date
- Mar 2008
- Location
- northern BC
- Posts
- 31,089
thats interesting cuz even my brand new pots are not completely flat so I think i will stay with what I got
The "Turkey test " was a real thing so my tech support guy told me, the biggest thing a scale/scanner would encounter is a 24 lb turkey dropped on a scale/ scanner by a checker with carpal tunnel syndrome so they would test by dropping 24 lbs to see if it would breakLee Lau - xxx-er is the laziest Asian canuck I know
-
10-23-2021, 10:00 PM #653
That's how my mom did the brisket--with onions and also with potatoes. The potatoes would only be partly submerged so they would be soft on the bottom and crispy on top. I should try sometime but I didn't get the recipe. Brisket, potato salad, cheesecake. The only things she could cook.
-
10-23-2021, 11:38 PM #654
-
06-07-2022, 02:48 AM #655Registered User
- Join Date
- May 2016
- Posts
- 3,612
OK, so after watching a couple vids about carbon steel I push the button and order one of the higher cost versions to give it a try.
So I’m ramping up on that, developing seasoning and so on, and cooking a few steaks to test things out. Seeing some heat distribution issues, but maybe that’s due to my glass top stove?
So in the process of doing multiple oven baking sessions using the seasoning wax/oil from the manufacture, I noticed my set of cast iron pans, which looked like could use some oil and baking as well, so I start working my way through those (I have about 10 or 15 of them).
So, naturally, the thought occurred to me to go ahead and just cook a steak in the cast iron pan. So I did. And damn was it good. Maybe now I’m back in the cast iron camp.
-
06-07-2022, 05:49 AM #656
Start with a seasoned room temp steak on a rack at 200 in the oven. Buy a thermometer. Pull at 125 degrees, then throw in some grape seed oil in a blazing cast iron, rest the steak for 2 minutes, slap the steak in the pan and don't touch it for 4 minutes, then flip, add some butter, baste and flip every minute until your liking. Open windows or doors. Rest for 15 honest minutes. Season again.
Easy peazy.Is it radix panax notoginseng? - splat
This is like hanging yourself but the rope breaks. - DTM
Dude Listen to mtm. He's a marriage counselor at burning man. - subtle plague
-
06-07-2022, 08:52 AM #657
If you have a budget glass top, it could be part of your challenge.
The heavier weight CI is going to do better on a shittier stove.
The heavier weight CI is going to do better with a thick steak on it.
I like a small carbon steel pan for the small/quick pan fry, sauté, stir fry jobs…. It’s lighter weight than the cast iron, but holds and disperses heat well.
Sent from my iPhone using TGR ForumsBest Skier on the Mountain
Self-Certified
1992 - 2012
Squaw Valley, USA
-
06-07-2022, 09:08 AM #658
One twenty five?!?!?!??!? It don’t need to be killed twice. I skip the resting part at the end too; Bubbe-meise!
Srsly tho reverse sear is pretty legit for thick cuts or if someone wants medium or (dear dog no) medium well. I didn’t have great luck with grape seed but I maybe had the crappy stuff, the taste after searing became strong and burnt. Couldn’t get it to work I guess just went back to cheap evo and good amounts of butter.
Cast iron skillet or Dutch oven for me every time but I’ve had OK luck with some stainless steel stuff.
My carbon steel pan was the hardest to get the seasoning right. Not sure I ever really did.
I also think you gotta be willing to stain the enamel if you use (even a fancy) Dutchie.
Sent from my iPhone using TGR ForumsIf we're gonna wear uniforms, we should all wear somethin' different!
-
06-07-2022, 09:16 AM #659
125 and then 4 minutes per side? Holy shit. Unless that's a four inch thick steak, four minutes per side in a blazing pan is going to be pretty near just right for a two inch steak. Without the oven. And I do a dry pan.
-
06-07-2022, 09:56 AM #660
-
06-07-2022, 09:58 AM #661"fuck off you asshat gaper shit for brains fucktard wanker." - Jesus Christ
"She was tossing her bean salad with the vigor of a Drunken Pop princess so I walked out of the corner and said.... "need a hand?"" - Odin
"everybody's got their hooks into you, fuck em....forge on motherfuckers, drag all those bitches across the goal line with you." - (not so) ill-advised strategy
-
06-07-2022, 10:00 AM #662
-
06-07-2022, 10:04 AM #663User
- Join Date
- Oct 2003
- Location
- Ogden
- Posts
- 9,164
I did a reverse sear elk backstrap last night. I smoked it on the grill at 225 until it hit 110 and then seared in a blazing hot cast iron skillet for about a minute each side. After the flip I spooned butter and garlic over it till it came off. Rested for ten minutes under tented foil. I’d say it was a perfect, warmish pink center medium rare.
Sent from my iPhone using TGR Forums
-
06-07-2022, 12:04 PM #664
-
06-07-2022, 12:10 PM #665
I bought my carbon pan at the resto supply. Cheap. Then cooked in it (always with fat, preferably bacon fat) until it was seasoned. Clean it by heating it up after cooking, under cold water and a scotchbrite scrub. Clean as a whistle and seasons quickly. That other shit is too fussy and isn't that much faster.
-
06-07-2022, 12:36 PM #666Registered User
- Join Date
- Feb 2008
- Posts
- 2,742
We recently got some stainless skillets and after using them for a few weeks went back to our CI for most things. Possible I'm doing it wrong, but the stainless is stickier even with some EVO on it, and much harder to clean. It does seem to sear a little better than CI though.
Also, re: swapping out induction for gas, that's a hard no from me. We just went from induction to natural gas, and we liked induction better on all fronts, particularly how it heats the pan faster. Boiling water on induction was amazingly fast.
-
06-07-2022, 01:08 PM #667
-
06-07-2022, 01:20 PM #668
-
06-07-2022, 01:48 PM #669
For the home cook the benefit of stainless is for the stick. So you can make a pan sauce.
A 12”-14” stainless sauté pan with a lid is should be in the quiver for most home cooks.
Brown SOBI chick thighs in a stainless sauté. Pull them. Add onions, dijon, white wine… scrape up all the brown bits. Add chicken back, cover until done.
A million variations of that in every French cookbook.
Sent from my iPhone using TGR ForumsBest Skier on the Mountain
Self-Certified
1992 - 2012
Squaw Valley, USA
-
06-07-2022, 04:06 PM #670
We have a small and large carbon steel pan. Took a bit to get them seasoned but they are rolling now. Try cooking eggs in em with a bit of oil. Seasons them pretty well if you do that for many days.
Eggs in them now with just a bit of oil is slipperier than nonstick. Easiest way to describe to folks how they should use and season their carbon steel pans is showing them the griddle station in a diner or a cheesesteak place.
-
06-07-2022, 04:20 PM #671Registered User
- Join Date
- Feb 2008
- Posts
- 2,742
-
06-07-2022, 05:40 PM #672
I admit I'm bad at guessing time. I just use my finger.
Is it radix panax notoginseng? - splat
This is like hanging yourself but the rope breaks. - DTM
Dude Listen to mtm. He's a marriage counselor at burning man. - subtle plague
-
06-07-2022, 06:06 PM #673
-
06-07-2022, 06:18 PM #674
These guys make really nice stuff.
https://madeincookware.com/collections/shop-all
This one is on the wish list:
-
06-07-2022, 08:31 PM #675
Bookmarks