Page 2 of 2 FirstFirst 1 2
Results 26 to 35 of 35
  1. #26
    Join Date
    Dec 2014
    Location
    Colorado Front Range
    Posts
    1,693
    The SVST arrived today and I took it for a spin. It is clearly a superior tool, and my observations were correct, that you can perform cutting depth adjustments in flight by rotating the device while using it. I find this to be a good feature, because the depth on the sidewalls isn't consistent so backing off or getting slightly more aggressive without having to stop and reset the depth setting is a very nice feature. If you can control a file, you can easily control this tool.

    I learned that cutting near the tip and tail is still challenging, because the ends of the skis chatter, so in this sense, my inherited Swix wasn't as bad as I thought it was. With the SVST however, I can back off on the aggressiveness of the cut in these areas to reduce the chatter. Anchoring the skis closer to the ends helps a bit as well. At the end of the day, if this area is important to you, an educated hand and a panzer file is still your best friend.

    I likely would have been equally happy had I opted for the FKS/Kunzman.

    PSA: I'm going to put the Swix on the gear swap for $8.00 - to cover Priority Mail, PayPal 3% and my time.

    Cheers,
    Thom
    Last edited by galibier_numero_un; 05-28-2015 at 03:42 PM.
    Galibier Design
    crafting technology in service of music

  2. #27
    Join Date
    Nov 2010
    Posts
    553
    OK, I'm dredging this thread out of the long distant past.....

    Had to prep a new GS race ski today which reminded me how much I hate my SkiMan sidewall planer.
    I've got one like this with the round blade:
    Name:  sidewall_sharp-1_large.jpg
Views: 154
Size:  55.0 KB
    I find the round cutter sucks - on mine it cannot be pulled in to cut close enough to the edge so you have to cut really deep to get next to the edge and I would end up with a concave channel in the sidewall above the edge.

    I've done the panzar file thing - both freehand and using guide held at greater angle - it works and is probably better but isn't the most convenient.
    The FKS Pro 3148 looks pretty good but $125??

    So:
    • Can I put a square cutter on my skiman? Will that address my issues or not?
    • There's one (Beast??) I saw that puts a really short panzar file on a 7* side edge guide. Is that any good?
    • Galibier - you still liking the SVST?
    • Alpinord - what you got that might work for me? Can I still order FKS thru you if I decide to go that way?


    thanks

  3. #28
    Join Date
    Oct 2008
    Location
    off on yet another Tangent
    Posts
    2,254
    Quote Originally Posted by dcpnz View Post
    OK, I'm dredging this thread out of the long distant past.....

    Had to prep a new GS race ski today which reminded me how much I hate my SkiMan sidewall planer.
    I've got one like this with the round blade:
    Name:  sidewall_sharp-1_large.jpg
Views: 154
Size:  55.0 KB
    I find the round cutter sucks - on mine it cannot be pulled in to cut close enough to the edge so you have to cut really deep to get next to the edge and I would end up with a concave channel in the sidewall above the edge.

    I've done the panzar file thing - both freehand and using guide held at greater angle - it works and is probably better but isn't the most convenient.
    The FKS Pro 3148 looks pretty good but $125??

    So:
    • Can I put a square cutter on my skiman? Will that address my issues or not?
    • There's one (Beast??) I saw that puts a really short panzar file on a 7* side edge guide. Is that any good?
    • Galibier - you still liking the SVST?
    • Alpinord - what you got that might work for me? Can I still order FKS thru you if I decide to go that way?


    thanks
    I'd try the square blade first. I can send you mine for a test drive. (send shipping particulars).

    All SkiMan manufactured, Toko/Swix/Briko-Maplus, etc side wall planers use the same round or square blade options. The Tokos come with square blade.

    I can order the FK/SKS/Kunzmann Pro Sidewall trimmer, Swix World Cup or the SVST, among other options. They can get spendy, so I'd improve the one in hand first.
    Best regards, Terry
    (Direct Contact is best vs PMs)

    SlideWright.com
    Ski, Snowboard & Bike Tools, Wax and Wares
    Repair, Waxing, Tuning, Mounting Tips & more

  4. #29
    Join Date
    Dec 2014
    Location
    Colorado Front Range
    Posts
    1,693
    If Terry's awesome gesture doesn't work for you, get the SVST through him. It's a great tool.

    ... Thom
    Galibier Design
    crafting technology in service of music

  5. #30
    Join Date
    Oct 2008
    Location
    off on yet another Tangent
    Posts
    2,254
    FTR, the Swix Side Wall Cutter World cup uses the same blades as the SkiMan mfgr'd planers, including economy through Pros.

    The SVSt & FK/SKS/Kunzmann Pro Sidewall trimmer have unique cutters.
    Best regards, Terry
    (Direct Contact is best vs PMs)

    SlideWright.com
    Ski, Snowboard & Bike Tools, Wax and Wares
    Repair, Waxing, Tuning, Mounting Tips & more

  6. #31
    Join Date
    Nov 2010
    Posts
    553
    ^^That's very kind of you Terry, much appreciate the offer. Going to need a few other tuning things pretty soon so will probably just order one from you at same time.

  7. #32
    Join Date
    Nov 2010
    Posts
    553
    And update....

    Last night I pulled apart my SkiMan and found that the spring behind the cutter blade piece that was stopping it tightening in enough. Removed the spring and Iíve lost the ability to micro adjust the cutter blade in and out but its a couple of mm closer in and Iím able to use just the depth adjusters to now get it to cut right next to the edge.

    Still going to try the square blade soon but for now it is working much better.

  8. #33
    Join Date
    Sep 2017
    Posts
    164
    I just freehand it with a sharp metal scraper. What is this, epicski???

  9. #34
    Join Date
    Oct 2008
    Location
    off on yet another Tangent
    Posts
    2,254
    FWIW Fk-SKS-Kunsmann side wall strippers are due Monday, along with spare blades.
    Best regards, Terry
    (Direct Contact is best vs PMs)

    SlideWright.com
    Ski, Snowboard & Bike Tools, Wax and Wares
    Repair, Waxing, Tuning, Mounting Tips & more

  10. #35
    Join Date
    Jan 2009
    Location
    Park City
    Posts
    1,742
    My swix works great.

    http://www.racewax.com/sidewall-cutt...-planer-ta103/


    Sent from my iPhone using TGR Forums
    I rip the groomed on tele gear

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •