Results 1 to 11 of 11
Thread: Look PX question...
-
04-21-2009, 05:28 PM #1
Look PX question...
Do you seriously need an allen wrench to adjust the DIN on the heel piece of a PX 18? There is no posidrive head in there... Truthfully, it doesn't look like much of a hex either...
Am I crazy or did I get some defective binders? Both heels are like that."Shit, I'll choke her while she's cleaning, and I'll do it wearing a helmet cam mounted on a full-face helmet.
I'll have meatdrink9 do the lighting for the shot. He'll make it artsy as fuck." - Phunk
-
04-21-2009, 07:19 PM #2
They should have posidrive. Sounds like you may have some defective bindings.
-
04-21-2009, 09:11 PM #3Registered User
- Join Date
- Sep 2008
- Location
- Canmore
- Posts
- 63
-
04-22-2009, 07:09 AM #4Registered User
- Join Date
- Aug 2008
- Location
- Central VT
- Posts
- 4,808
my px14s have a posi on the heels, its a bitch to turn it but its definitley a posi.
-
04-22-2009, 07:20 AM #5
PX 18's have the allen key...they are not defective.
You should have been here yesterday!
-
04-22-2009, 07:26 AM #6
Hmmm, my PX 18 and all my PX 14 have posidrive and hex in the heel.
Last edited by ACHTUNG; 04-22-2009 at 10:44 AM.
-
04-22-2009, 08:13 AM #7
My Axial2 200s need an allen key on the heel...
-
04-22-2009, 08:44 AM #8
Hmm... must be a fairly new thing. Not a bad idea, though... those things can be a bitch to turn up high.
"Shit, I'll choke her while she's cleaning, and I'll do it wearing a helmet cam mounted on a full-face helmet.
I'll have meatdrink9 do the lighting for the shot. He'll make it artsy as fuck." - Phunk
-
04-22-2009, 09:14 AM #9Registered User
- Join Date
- Nov 2003
- Location
- none
- Posts
- 8,368
My first gen. pairs have a posi drive, but they are a bitch to turn up. Perhaps that's why the switched to hex?
-
04-22-2009, 10:03 AM #10
All the Pivot/ Axial bindings I have or have had (and there's been a lot) have had both the pozi and an allen key heel piece screw for the DIN setting (8mm IIRC).
All the PX/ Axial 2 bindings I have or have had (and there's been only a few) have also had both pozi and allen key, same as the old Pivot/ Axial.
I like the design, because it's hard to turn up the tension with the pozi -- much easier with the leverage of a big allen key.
-
04-24-2009, 08:48 AM #11Registered User
- Join Date
- Jan 2009
- Posts
- 157
My px14 racing need an allen key for sure...they are a bitch to adjust too !
Bookmarks