Page 53 of 53 FirstFirst ... 48 49 50 51 52 53
Results 1,301 to 1,316 of 1316
  1. #1301
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    210

    Binding Mount Paper Templates

    Quote Originally Posted by UpperDaze View Post
    Can anyone point me in the direction of an Atomic Warden 13 MNC mounting template? Couldn't find it in this thread (though I saw the demo version)... any help is appreciated.
    It's combined with the STH2 template. Can be found on Slidewright.com, but here's a direct link:

    https://drive.google.com/file/d/1maC...w?usp=drivesdk

  2. #1302
    Join Date
    Jan 2012
    Location
    SLC
    Posts
    21
    Quote Originally Posted by lucknau View Post
    It's combined with the STH2 template. Can be found on Slidewright.com, but here's a direct link:

    https://drive.google.com/file/d/1maC...w?usp=drivesdk
    Gracias

  3. #1303
    Join Date
    Nov 2018
    Posts
    3
    So the STH2 template V1.3 from powderguide is correct?

    Im asking cause i have seen already 3 different versions of templates for the STH2. Front screws 40, 42 or 42.5mm spaced

  4. #1304
    Join Date
    Aug 2014
    Posts
    2
    anyone have the paper template for Salomon Warden 11??? I have the jig for the 13 but the heel is different. Please send a link or send me PDF. Much thanks.

  5. #1305
    Join Date
    Feb 2017
    Posts
    58
    Quote Originally Posted by 1524251997 View Post
    anyone have the paper template for Salomon Warden 11??? I have the jig for the 13 but the heel is different. Please send a link or send me PDF. Much thanks.
    good god, man, edit your fucking screen name & maybe someone will give you some help


    gonna have to change my name
    PM me your favorite stashes, I'll send you a pic of NW_SKIER's tits

  6. #1306
    Join Date
    Nov 2006
    Location
    NCW
    Posts
    1,596
    Quote Originally Posted by CarlE View Post
    So... Any europeans that can get the template/measurements for the Salomon MTN bindning? As far as I know, it is only available in the alp/euro zone (no US, no Nordics). Don't ask me how i managed to get hold of the binding here in Sweden... ;-)
    Was this ever made available anywhere in the US?

  7. #1307
    Join Date
    Nov 2018
    Posts
    3
    Regarding shift template:


    I compared it with a salomon jig today:

    The distance front single screw to first row of screws is 64.5mm

    Half sole length mark on front: 16mm in front of first double screw row (seen from tip)

    Half sole on rear: 20mm after first double screw row (seen from tip)


    Cheers - Tom

    Quote Originally Posted by lucknau View Post
    Okay, it's fixed and uploaded.

  8. #1308
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    210
    Quote Originally Posted by tomelgato View Post
    Regarding shift template:


    I compared it with a salomon jig today:

    The distance front single screw to first row of screws is 64.5mm

    Half sole length mark on front: 16mm in front of first double screw row (seen from tip)

    Half sole on rear: 20mm after first double screw row (seen from tip)


    Cheers - Tom
    So half sole would be a dashed line to show where the boot heel and toe will be?

    Not sure why that first measurement is 1.5mm shorter. I'd think as far forward as possible would be best, but maybe I don't think it matters, as long as the piece sits in the track and doesn't come loose... I can change it though, for the sake of OCD.

    Can you do a center to center diagonal measurement from the front screw to a first row screw?

  9. #1309
    Join Date
    Nov 2018
    Posts
    3
    Yes, i like the half sole length marks like on the powderguide templates. You can verify the boot center mark easily.

    My first measurement on the bindings was 65.5 mm as well. Maybe salomon had a little bit of sliding tolerance in mind, if the ski flexes. Like on some plates. The front part is quite long.

    Diagonal i can do next time when im in that workshop.

    Click image for larger version. 

Name:	img_7218.jpg 
Views:	33 
Size:	267.9 KB 
ID:	258623
    Last edited by tomelgato; 12-05-2018 at 03:28 AM.

  10. #1310
    Join Date
    Feb 2015
    Posts
    2

    Dynafit Beast 14

    Forgive me if it's already out there on this thread but I can't find it. Any paper templates out there for the Dynafit Beast 14? I've heard its a toe piece like the Radical 2 and a heel piece like the beast 16 but can't seem to find either template like what's on here.

    Thanks

  11. #1311
    Join Date
    May 2009
    Location
    pdx
    Posts
    10,021
    the rad 2 I found on knut's website
    pm him or search for his link in this thread
    maybe he's got the beast 14 too

  12. #1312
    Join Date
    Feb 2015
    Posts
    2

    Beast 14

    Quote Originally Posted by acinpdx View Post
    the rad 2 I found on knut's website
    pm him or search for his link in this thread
    maybe he's got the beast 14 too
    Beauty! I found his earlier post linked to google drive. Thank you.

  13. #1313
    Join Date
    Mar 2017
    Posts
    14

    Ski Trab TR2 Template

    I got a PDF emailed to me of the TR2 template if anyone needs it.

    Used it successfully once, about to use it again - printed on a plotter.

    Can't seem to attach it yet so let me know and I'll try to throw it up somewhere (drive, dropbox, whatever).

  14. #1314
    Join Date
    Jan 2008
    Location
    livin the dream
    Posts
    3,307
    Quote Originally Posted by Muggydude View Post
    Updated the template for wardens as well. Also changed circle diameters to 20mm to aid in spacing holes from hold mounts.
    bump. took a while to find this. THANKS!
    Best Skier on the Mountain
    Self-Certified
    1992 - 2012
    Squaw Valley, USA

  15. #1315
    Join Date
    Mar 2011
    Location
    North,NorthEast
    Posts
    2,003
    Searched for a while and didnít really want to start a thread for one question, so Iíll start here - I have a pair of skis mounted with old dukes, I want to throw some griffons on instead, will the holes match up? And I can just plug that center hole....

  16. #1316
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    210
    Quote Originally Posted by t-the-east View Post
    Searched for a while and didnít really want to start a thread for one question, so Iíll start here - I have a pair of skis mounted with old dukes, I want to throw some griffons on instead, will the holes match up? And I can just plug that center hole....
    Not even close. You can confirm this by looking at the dimensions written on the two templates.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •