Page 57 of 57 FirstFirst ... 52 53 54 55 56 57
Results 1,401 to 1,425 of 1425
  1. #1401
    Join Date
    Aug 2018
    Posts
    41
    Quote Originally Posted by Dshack89 View Post
    Yeah I didn't have any luck finding anything either. I just replaced my Kingpins with Alpinists, so my toe was a direct fit but I had to drill 4 new holes for the heel. I wasn't confident I could keep the heel squared up if I freehanded it, so I made this PDF for the heel. You could combine that with a Kingpin toe mounting plate. Only thing you'd need to deal with is getting the BSL right, but that shouldn't be too hard.

    Hope this is helpful!
    That's awesome, thanks!

  2. #1402
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,721
    Knut... your library of templates is great... thanks!

    I found an "error" on one template. On the Warden 11 template you have the heel screw front to back measure STATED as 75mm but it measure out around 80mm.

    I say "error" because I have a warden 11 demo (non-MNC) and my heel track lines up exactly with your template heel, but I measure that spacing at ~79mm with digital calipers. gregorys made a warden 11 demo template he posted a link to and he measures it at 80mm, FWIW.

    I can't comment at all on the toe piece because the demo toe isn't close to the what you have there.
    Goal: ski in the 2018/19 season

  3. #1403
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    643
    Quote Originally Posted by Shorty_J View Post
    Knut... your library of templates is great... thanks!

    I found an "error" on one template. On the Warden 11 template you have the heel screw front to back measure STATED as 75mm but it measure out around 80mm.

    I say "error" because I have a warden 11 demo (non-MNC) and my heel track lines up exactly with your template heel, but I measure that spacing at ~79mm with digital calipers. gregorys made a warden 11 demo template he posted a link to and he measures it at 80mm, FWIW.

    I can't comment at all on the toe piece because the demo toe isn't close to the what you have there.
    I don't see an error. Are the Warden 11 heelplates different than the 13?


    That looks like 75mm, on center, to me. If you're mounting used Wardens, there's around +-5mm wiggle room for the two front screws, because those black plastic inserts and the stainless steel plate on top are made to slide.


  4. #1404
    Join Date
    Nov 2011
    Posts
    60
    testmounted Tyrolia Attack 13 using jondrums's Tyrolia template R4.pdf, I found they are about 6mm forward than the line which I intended.
    I made some mistakes or the template is not for Attacks?
    I think I can simply set back 6mm but please let me know if anyone knows better or updated template.

  5. #1405
    Join Date
    Nov 2011
    Posts
    60
    I've found another template for Tyrolia by Powder Guide.
    Printed and compared, It seems fine.


    Sent from my iPhone using TGR Forums

  6. #1406
    Join Date
    Nov 2011
    Posts
    60
    Judging by my test,

    toe of PG's is perfect.
    heel of PG's is OK but 2.5mm father(select 5mm longer BSL) is better to center of forward pressure indecator.
    toe of BF's needs to be shortened 5mm(select 10mm shorter BSL).
    heel of BF's OK same as PG's but 2.5mm father(select 5mm longer BSL) is better, too.


    Sent from my iPhone using TGR Forums

  7. #1407
    Join Date
    Apr 2012
    Location
    N@
    Posts
    371
    Yeah there have been known issues with the tyrolia template in this thread for some time now. It's been a while since I used it last but I think the jigarex tyrolia plate is off by the same amount as well. I came here to point you to the powderguide template, but I see that you've found it already. That's what I use (instead of the BF template and jigarex plates) for all my tyrolia mounts.

  8. #1408
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,721
    I don't know if the 11 and 13 have different heel patterns as I've only ever owned the 11 demo.

    But my point was that on the template itself, the hole spacing is around 79-80mm (measured on the paper) but it SAYS its 75mm.

    Sent from my SM-A505W using Tapatalk
    Goal: ski in the 2018/19 season

  9. #1409
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    643

    Binding Mount Paper Templates

    Quote Originally Posted by Shorty_J View Post
    I don't know if the 11 and 13 have different heel patterns as I've only ever owned the 11 demo.

    But my point was that on the template itself, the hole spacing is around 79-80mm (measured on the paper) but it SAYS its 75mm.

    Sent from my SM-A505W using Tapatalk
    Maybe we're using different metric systems. Are you printing to scale? This is what I measure.



    Post a link to the template you're using.

    Edit: Fack. Never mind. I see what you're saying now. I'm not looking at the same template as you.

  10. #1410
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,721
    ^^^ you got it.

    Sent from my SM-A505W using Tapatalk
    Goal: ski in the 2018/19 season

  11. #1411
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    643
    Quote Originally Posted by Shorty_J View Post
    ^^^ you got it.

    Sent from my SM-A505W using Tapatalk
    Took a couple of tries.

  12. #1412
    Join Date
    Nov 2019
    Posts
    2
    Quote Originally Posted by lucknau View Post
    Took a couple of tries.
    How did it go?

  13. #1413
    Join Date
    Feb 2012
    Posts
    48
    Is there a template out there that works for the non-demo Warden 11s?

  14. #1414
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,721
    ^^^ Knut's full template library... there's a link in here a ways back.

    Sent from my SM-A505W using Tapatalk
    Goal: ski in the 2018/19 season

  15. #1415
    Join Date
    Nov 2007
    Location
    sfbay
    Posts
    2,161
    Quote Originally Posted by MRR11 View Post
    Yeah there have been known issues with the tyrolia template in this thread for some time now. It's been a while since I used it last but I think the jigarex tyrolia plate is off by the same amount as well. I came here to point you to the powderguide template, but I see that you've found it already. That's what I use (instead of the BF template and jigarex plates) for all my tyrolia mounts.
    can you link the powderguide template? I'll fix the one here

  16. #1416
    Join Date
    Nov 2007
    Location
    sfbay
    Posts
    2,161
    do me a favor and link knuts library, I'll put a link on the first page
    was also going to link the verified shift template on the first page

  17. #1417
    Join Date
    Apr 2012
    Location
    N@
    Posts
    371
    Quote Originally Posted by jondrums View Post
    can you link the powderguide template? I'll fix the one here
    Slidewright's binding template page has a link to Knut's google drive for all templates. The Tyrolia template is the last one at the bottom.

    I'd offer to test it once you make the changes, but I don't have a loose pair of Tyrolias sitting around at the moment.

    https://www.slidewright.com/powdergu...ing-templates/

    https://drive.google.com/drive/folde...yYY6Gg2a3Dd245

  18. #1418
    Join Date
    Jul 2017
    Posts
    92
    I used the Tyrolia template found on the google drive for some attack 14at. On the money.


    Sent from my iPhone using TGR Forums

  19. #1419
    Join Date
    Oct 2008
    Location
    Somewhere else
    Posts
    3,721
    Quote Originally Posted by jondrums View Post
    do me a favor and link knuts library, I'll put a link on the first page
    was also going to link the verified shift template on the first page
    If you're adding stuff to the original post, could you add the images from this thread for the Warden 11 Demo?

    I've mounted with it and it looks good.

    https://www.tetongravity.com/forums/...PAPER-TEMPLATE

    Sent from my SM-A505W using Tapatalk
    Goal: ski in the 2018/19 season

  20. #1420
    Join Date
    Jun 2018
    Location
    Portland, OR
    Posts
    643

    Binding Mount Paper Templates

    Quote Originally Posted by jondrums View Post
    do me a favor and link knuts library, I'll put a link on the first page
    was also going to link the verified shift template on the first page
    Salomon/Atomic SHIFT MNC 13 Binding Template

  21. #1421
    Join Date
    Jan 2017
    Location
    Santa Cruz
    Posts
    42
    Pretty niche but does anyone have a paper template of the Cast 2.0s brake holder+climbing bale mounting, mine got pretty beat up.

  22. #1422
    Join Date
    Dec 2019
    Location
    Eastern PA
    Posts
    11
    Just had to say thanks for everyone who pulled these templates together and verified them - super helpful!!

  23. #1423
    Join Date
    Oct 2017
    Posts
    638
    Quote Originally Posted by backcountrybummer View Post
    Pretty niche but does anyone have a paper template of the Cast 2.0s brake holder+climbing bale mounting, mine got pretty beat up.
    39mm and 55mm in front of the the center of the two most forward heel holes of a standard Pivot heel.

    Click image for larger version. 

Name:	cast.jpg 
Views:	10 
Size:	996.8 KB 
ID:	304742


    The lines line up, just poor perspective in the pic. This is the tip most at 55, the tail most being at 39mm.
    Last edited by kid-kapow; 12-04-2019 at 12:23 PM. Reason: add pic

  24. #1424
    Join Date
    Dec 2008
    Location
    The Trees
    Posts
    664
    Subscribed


    Sent from my iPhone using TGR Forums
    That Don't Make No Sense

  25. #1425
    Join Date
    Sep 2017
    Posts
    5
    Thanks to everyone who compiled these. I've used a few different templates and they've all worked perfectly

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •