Results 1,276 to 1,300 of 1728
Thread: Binding Mount Paper Templates
-
10-12-2018, 07:07 PM #1276but not a marker fanboy
- Join Date
- Apr 2012
- Location
- N@
- Posts
- 394
No worries, only concern is where you end up relative to the ski's boot center -- pattern is spot on. Make sure to report back in this thread
-
10-29-2018, 10:16 PM #1277Registered User
- Join Date
- Oct 2018
- Posts
- 8
-
10-29-2018, 10:18 PM #1278
-
10-30-2018, 10:07 AM #1279Registered User
- Join Date
- Oct 2018
- Posts
- 8
-
10-30-2018, 10:11 AM #1280
Binding Mount Paper Templates
Thanks. Okay, I'll fix it on Thursday or Friday. I had someone check dimensions against a jig, but maybe he didn't check everything. Or I just fucked up something.
Edit. template has been updated, as of 11/2/2018, HERELast edited by lucknau; 11-02-2018 at 11:53 AM.
-
11-01-2018, 09:57 AM #1281
Does anyone know of a template for the G3 Zed? Is it similar to the Ion?
-
11-01-2018, 09:59 AM #1282
-
11-01-2018, 10:32 AM #1283
-
11-02-2018, 08:47 AM #1284Registered User
- Join Date
- Oct 2013
- Posts
- 67
Car also confirm for the Shift that the two back holes on the toe-piece are slightly too close together. Also, check the BSL measurement, because where they're at on the template my test came out having to have the heel piece all the way back to fit the boot, rather than being an inch or so up on the mounting rail like they're supposed to be.
-
11-02-2018, 08:55 AM #1285
Yeah, it was all jacked up. I'm almost done. Got the toe and heel patterns fixed and working on the BSL right now. Original dimensions given were eyeball close, but not accurate enough for a build. Will post a fixed template later today.
Edit: done! linked HERELast edited by lucknau; 11-02-2018 at 11:54 AM.
-
11-02-2018, 11:45 AM #1286
Okay, it's fixed and uploaded. I updated the link on my original post, #1251.
The originally given dimensions were just a hair off in all directions and the boot center line was off by 10mm.
I measured on my bindings when they arrived yesterday, modified and tested the template on two boot sole lengths, and it was accurate: right on the center line of the adjustment range.
Also learned today that my 331mm (stamped) Salomon MTN labs are actually 334mm.
-
11-02-2018, 07:38 PM #1287
-
11-02-2018, 07:43 PM #1288
-
11-02-2018, 07:53 PM #1289
-
11-03-2018, 12:17 AM #1290
-
11-03-2018, 12:18 AM #1291
-
11-05-2018, 02:42 PM #1292Registered User
- Join Date
- Oct 2018
- Posts
- 8
Thanks for fixing the template. Used it to successfully mount my shifts last night. I think holes are absolutely dead on however I think the BSL measurements on the heel are off by between 2 and 5 mm. The centerline is close on the toe but i think it's also off by a tiny bit. I have 301mm MTN Lab boots and i'm measuring the center mark as dead in the middle with my calipers so that fact that you said your MTN labs were off by 3mm makes me think that you may have had a similar issue? Either way, it's such a small amount that I didn't even both trying to figure out how much it was off by. The only thing that might concern me is the possibly slightly off toe centerline marks.
In another related note, the shift mounting diagrams show adjusting the heel to a spot on the plate that it marks as "=L". Any idea what this is referring to? I think it was in step 3? Mostly just curious.
-
11-06-2018, 05:24 PM #1293
-
11-08-2018, 12:06 PM #1294
Used the Shift template last night. It was spot on.
Thanks Shane
-
11-10-2018, 12:50 PM #1295Minion
- Join Date
- Nov 2018
- Posts
- 1
tyrolia_paper_template_R4 vs PowderGuide Tyrolia / Head template
I'm about to mount the Tyrolia Attack2 13 GW. Searched for some templates for Tyrolia bindings and found two, the one listed in this thread's first post and the PowderGuide one. Printed both of them and checked the scales and they were perfect on both templates. Then I cut and aligned them to BSL of 305 mm. I then noticed that the tyrolia_paper_template_R4 positioned the toe piece 5 mm further to the tip compared to the PowerGuide one. The heel piece were identically positioned on both templates.
The question is... Which template is correct?Last edited by macke; 11-11-2018 at 04:44 AM.
-
11-10-2018, 01:02 PM #1296
-
11-10-2018, 01:12 PM #1297but not a marker fanboy
- Join Date
- Apr 2012
- Location
- N@
- Posts
- 394
The Powderguide template is much more accurate in terms of getting your boot center correct. Use that one. But still do a test mount to tweak if necessary. I just tested the same thing you did last week.
-
11-19-2018, 01:02 AM #1298
Binding Mount Paper Templates
Tried searching and came up short, anyone have a kingpin template they have tested?
Edit #961 seems to have it.
Sent from my iPhone using TGR Forums
-
11-29-2018, 01:31 PM #1299Minion
- Join Date
- Nov 2018
- Posts
- 1
Plum Yaks?
Hey, long time lurker and user of the excellent templates here.
Anyone got a template for a Plum Yak? The one in the sticky got a narrower pattern (Guide?) and the Yaks are wider in both X and Y planes.
-
11-29-2018, 07:59 PM #1300
Can anyone point me in the direction of an Atomic Warden 13 MNC mounting template? Couldn't find it in this thread (though I saw the demo version)... any help is appreciated.
Bookmarks