Binding Mount Paper Templates

[skinipenem]

I'll need to circle back again and clean up a template if it'll work, but this is what I have for Warden demo layouts:

Attachment 491243

As noted, I'd think Pivot heels ought to clear. You'd need to confirm toes. If there is, you can always plug holes and/or maybe install ss inserts.

Thank you!

Sent from my SM-S908U1 using Tapatalk

[nickesthomas3@gmail.com]

In today’s dynamic and quickly evolving business landscape, organizations constantly seek innovative strategies to remain competitive and achieve sustainable growth. This is where management consulting services play a pivotal role.

[factive]

Any info on this? I cannot get the Stage to match anything I've seen before.

Not sure if the 10s are different, but I just mounted some Stage 11s this morning for my lady using the Warden 11 / Strive 12,14 template. It was perfect.

[bearcub69]

ive searched but im having trouble finding the sth template if anyone can help out

[NW_SKIER]

ive searched but im having trouble finding the sth template if anyone can help out

STH:

https://docs.google.com/file/d/0B0Sn...hOVmQ5ZGM/edit

STH2:

https://drive.google.com/file/d/1maC...w?usp=drivesdk

[bearcub69]

STH:

https://docs.google.com/file/d/0B0Sn...hOVmQ5ZGM/edit

STH2:

https://drive.google.com/file/d/1maC...w?usp=drivesdk

big thanks

[skibummin]

Anybody have a template for the new marker griffon demo? It no longer matches the previous griffon demo/schizo template.

Sent from my SM-S928U1 using Tapatalk

[shank]

Anybody have a template for the new marker griffon demo? It no longer matches the previous griffon demo/schizo template.

Lucknau posted one circa 2018 - I've got no experience with the mount itself but he said he'd checked it out. I'm not 100% sure that 2017 Marker demos are == to 2024, but checking a tech manual from here shows that the product ID for the jig for Marker TCX demos in 2022 matched the product ID lucknau mentioned elsewhere in the thread in 2018 - and I'm pretty sure no changes to Marker demos in the past couple of years at least. Would def mount on a 2x4 first to confirm holes and boot center, but it should be a decent start.

Made a template for post 2017 Griffon/Squire Demo:

Marker Griffon and Squire Demo c.2017 template

Tested on several boot sizes ranging from 260mm to 337mm. Boot center for all tests landed with an accuracy of 2mm on either side of the reference mark.

Marshal was also asking about new marker demos upthread, he might have found a solution he can share too.

[skibummin]

Lucknau posted one circa 2018 - I've got no experience with the mount itself but he said he'd checked it out. I'm not 100% sure that 2017 Marker demos are == to 2024, but checking a tech manual from here shows that the product ID for the jig for Marker TCX demos in 2022 matched the product ID lucknau mentioned elsewhere in the thread in 2018 - and I'm pretty sure no changes to Marker demos in the past couple of years at least. Would def mount on a 2x4 first to confirm holes and boot center, but it should be a decent start.



Marshal was also asking about new marker demos upthread, he might have found a solution he can share too.

Thank you, I think that second template is the right one. I'm mounting a monoski for a friend and will confirm on a board first.

Sent from my SM-S928U1 using Tapatalk