Binding Mount Paper Templates

[Jongle]

Yeah I didn't have any luck finding anything either. I just replaced my Kingpins with Alpinists, so my toe was a direct fit but I had to drill 4 new holes for the heel. I wasn't confident I could keep the heel squared up if I freehanded it, so I made this PDF for the heel. You could combine that with a Kingpin toe mounting plate. Only thing you'd need to deal with is getting the BSL right, but that shouldn't be too hard.

Hope this is helpful!

That's awesome, thanks!

[Shorty_J]

Knut... your library of templates is great... thanks!

I found an "error" on one template. On the Warden 11 template you have the heel screw front to back measure STATED as 75mm but it measure out around 80mm.

I say "error" because I have a warden 11 demo (non-MNC) and my heel track lines up exactly with your template heel, but I measure that spacing at ~79mm with digital calipers. gregorys made a warden 11 demo template he posted a link to and he measures it at 80mm, FWIW.

I can't comment at all on the toe piece because the demo toe isn't close to the what you have there.

[lucknau]

Knut... your library of templates is great... thanks!

I found an "error" on one template. On the Warden 11 template you have the heel screw front to back measure STATED as 75mm but it measure out around 80mm.

I say "error" because I have a warden 11 demo (non-MNC) and my heel track lines up exactly with your template heel, but I measure that spacing at ~79mm with digital calipers. gregorys made a warden 11 demo template he posted a link to and he measures it at 80mm, FWIW.

I can't comment at all on the toe piece because the demo toe isn't close to the what you have there.

I don't see an error. Are the Warden 11 heelplates different than the 13?


That looks like 75mm, on center, to me. If you're mounting used Wardens, there's around +-5mm wiggle room for the two front screws, because those black plastic inserts and the stainless steel plate on top are made to slide.

[j0z77]

testmounted Tyrolia Attack 13 using jondrums's Tyrolia template R4.pdf, I found they are about 6mm forward than the line which I intended.
I made some mistakes or the template is not for Attacks?
I think I can simply set back 6mm but please let me know if anyone knows better or updated template.

[j0z77]

I've found another template for Tyrolia by Powder Guide.
Printed and compared, It seems fine.


Sent from my iPhone using TGR Forums

[j0z77]

Judging by my test,

toe of PG's is perfect.
heel of PG's is OK but 2.5mm father(select 5mm longer BSL) is better to center of forward pressure indecator.
toe of BF's needs to be shortened 5mm(select 10mm shorter BSL).
heel of BF's OK same as PG's but 2.5mm father(select 5mm longer BSL) is better, too.


Sent from my iPhone using TGR Forums

[MRR11]

Yeah there have been known issues with the tyrolia template in this thread for some time now. It's been a while since I used it last but I think the jigarex tyrolia plate is off by the same amount as well. I came here to point you to the powderguide template, but I see that you've found it already. That's what I use (instead of the BF template and jigarex plates) for all my tyrolia mounts.

[Shorty_J]

I don't know if the 11 and 13 have different heel patterns as I've only ever owned the 11 demo.

But my point was that on the template itself, the hole spacing is around 79-80mm (measured on the paper) but it SAYS its 75mm.

Sent from my SM-A505W using Tapatalk

[lucknau]

I don't know if the 11 and 13 have different heel patterns as I've only ever owned the 11 demo.

But my point was that on the template itself, the hole spacing is around 79-80mm (measured on the paper) but it SAYS its 75mm.

Sent from my SM-A505W using Tapatalk

Maybe we're using different metric systems. Are you printing to scale? This is what I measure.



Post a link to the template you're using.

Edit: Fack. Never mind. I see what you're saying now. I'm not looking at the same template as you.

[Shorty_J]

^^^ you got it.

Sent from my SM-A505W using Tapatalk

[lucknau]

^^^ you got it.

Sent from my SM-A505W using Tapatalk

Took a couple of tries.

[m8d988]

Took a couple of tries.

How did it go?

[MegaStoke]

Is there a template out there that works for the non-demo Warden 11s?

[Shorty_J]

^^^ Knut's full template library... there's a link in here a ways back.

Sent from my SM-A505W using Tapatalk

[jondrums]

Yeah there have been known issues with the tyrolia template in this thread for some time now. It's been a while since I used it last but I think the jigarex tyrolia plate is off by the same amount as well. I came here to point you to the powderguide template, but I see that you've found it already. That's what I use (instead of the BF template and jigarex plates) for all my tyrolia mounts.

can you link the powderguide template? I'll fix the one here

[jondrums]

do me a favor and link knuts library, I'll put a link on the first page
was also going to link the verified shift template on the first page

[MRR11]

can you link the powderguide template? I'll fix the one here

Slidewright's binding template page has a link to Knut's google drive for all templates. The Tyrolia template is the last one at the bottom.

I'd offer to test it once you make the changes, but I don't have a loose pair of Tyrolias sitting around at the moment.

https://www.slidewright.com/powdergu...ing-templates/

https://drive.google.com/drive/folde...yYY6Gg2a3Dd245

[pembyguy]

I used the Tyrolia template found on the google drive for some attack 14at. On the money.


Sent from my iPhone using TGR Forums

[Shorty_J]

do me a favor and link knuts library, I'll put a link on the first page
was also going to link the verified shift template on the first page

If you're adding stuff to the original post, could you add the images from this thread for the Warden 11 Demo?

I've mounted with it and it looks good.

https://www.tetongravity.com/forums/...PAPER-TEMPLATE

Sent from my SM-A505W using Tapatalk

[lucknau]

do me a favor and link knuts library, I'll put a link on the first page
was also going to link the verified shift template on the first page

Salomon/Atomic SHIFT MNC 13 Binding Template

[backcountrybummer]

Pretty niche but does anyone have a paper template of the Cast 2.0s brake holder+climbing bale mounting, mine got pretty beat up.

[ThatsNotIrony]

Just had to say thanks for everyone who pulled these templates together and verified them - super helpful!!

[kid-kapow]

Pretty niche but does anyone have a paper template of the Cast 2.0s brake holder+climbing bale mounting, mine got pretty beat up.

39mm and 55mm in front of the the center of the two most forward heel holes of a standard Pivot heel.




The lines line up, just poor perspective in the pic. This is the tip most at 55, the tail most being at 39mm.

[Cabinfever]

Subscribed


Sent from my iPhone using TGR Forums

[wildcats1425]

Thanks to everyone who compiled these. I've used a few different templates and they've all worked perfectly