Results 1,401 to 1,425 of 1728
Thread: Binding Mount Paper Templates
-
10-26-2019, 06:35 PM #1401Registered User
- Join Date
- Aug 2018
- Posts
- 229
-
11-01-2019, 11:47 AM #1402
Knut... your library of templates is great... thanks!
I found an "error" on one template. On the Warden 11 template you have the heel screw front to back measure STATED as 75mm but it measure out around 80mm.
I say "error" because I have a warden 11 demo (non-MNC) and my heel track lines up exactly with your template heel, but I measure that spacing at ~79mm with digital calipers. gregorys made a warden 11 demo template he posted a link to and he measures it at 80mm, FWIW.
I can't comment at all on the toe piece because the demo toe isn't close to the what you have there.Goal: ski in the 2018/19 season
-
11-02-2019, 12:57 AM #1403
I don't see an error. Are the Warden 11 heelplates different than the 13?
That looks like 75mm, on center, to me. If you're mounting used Wardens, there's around +-5mm wiggle room for the two front screws, because those black plastic inserts and the stainless steel plate on top are made to slide.
-
11-02-2019, 07:09 AM #1404Registered User
- Join Date
- Nov 2011
- Posts
- 68
testmounted Tyrolia Attack 13 using jondrums's Tyrolia template R4.pdf, I found they are about 6mm forward than the line which I intended.
I made some mistakes or the template is not for Attacks?
I think I can simply set back 6mm but please let me know if anyone knows better or updated template.
-
11-02-2019, 07:34 AM #1405Registered User
- Join Date
- Nov 2011
- Posts
- 68
I've found another template for Tyrolia by Powder Guide.
Printed and compared, It seems fine.
Sent from my iPhone using TGR Forums
-
11-02-2019, 09:31 AM #1406Registered User
- Join Date
- Nov 2011
- Posts
- 68
Judging by my test,
toe of PG's is perfect.
heel of PG's is OK but 2.5mm father(select 5mm longer BSL) is better to center of forward pressure indecator.
toe of BF's needs to be shortened 5mm(select 10mm shorter BSL).
heel of BF's OK same as PG's but 2.5mm father(select 5mm longer BSL) is better, too.
Sent from my iPhone using TGR Forums
-
11-02-2019, 09:57 AM #1407but not a marker fanboy
- Join Date
- Apr 2012
- Location
- N@
- Posts
- 394
Yeah there have been known issues with the tyrolia template in this thread for some time now. It's been a while since I used it last but I think the jigarex tyrolia plate is off by the same amount as well. I came here to point you to the powderguide template, but I see that you've found it already. That's what I use (instead of the BF template and jigarex plates) for all my tyrolia mounts.
-
11-02-2019, 11:48 AM #1408
I don't know if the 11 and 13 have different heel patterns as I've only ever owned the 11 demo.
But my point was that on the template itself, the hole spacing is around 79-80mm (measured on the paper) but it SAYS its 75mm.
Sent from my SM-A505W using TapatalkGoal: ski in the 2018/19 season
-
11-02-2019, 01:15 PM #1409
-
11-02-2019, 01:21 PM #1410
^^^ you got it.
Sent from my SM-A505W using TapatalkGoal: ski in the 2018/19 season
-
11-02-2019, 02:04 PM #1411
-
11-15-2019, 03:04 AM #1412Registered User
- Join Date
- Nov 2019
- Posts
- 2
-
11-18-2019, 03:24 PM #1413
Is there a template out there that works for the non-demo Warden 11s?
-
11-18-2019, 03:51 PM #1414
^^^ Knut's full template library... there's a link in here a ways back.
Sent from my SM-A505W using TapatalkGoal: ski in the 2018/19 season
-
11-23-2019, 10:09 AM #1415
-
11-23-2019, 10:17 AM #1416
do me a favor and link knuts library, I'll put a link on the first page
was also going to link the verified shift template on the first page
-
11-23-2019, 10:30 AM #1417but not a marker fanboy
- Join Date
- Apr 2012
- Location
- N@
- Posts
- 394
Slidewright's binding template page has a link to Knut's google drive for all templates. The Tyrolia template is the last one at the bottom.
I'd offer to test it once you make the changes, but I don't have a loose pair of Tyrolias sitting around at the moment.
https://www.slidewright.com/powdergu...ing-templates/
https://drive.google.com/drive/folde...yYY6Gg2a3Dd245
-
11-23-2019, 12:09 PM #1418
I used the Tyrolia template found on the google drive for some attack 14at. On the money.
Sent from my iPhone using TGR Forums
-
11-23-2019, 05:03 PM #1419
If you're adding stuff to the original post, could you add the images from this thread for the Warden 11 Demo?
I've mounted with it and it looks good.
https://www.tetongravity.com/forums/...PAPER-TEMPLATE
Sent from my SM-A505W using TapatalkGoal: ski in the 2018/19 season
-
11-27-2019, 09:56 PM #1420
Binding Mount Paper Templates
-
12-01-2019, 01:42 AM #1421
Pretty niche but does anyone have a paper template of the Cast 2.0s brake holder+climbing bale mounting, mine got pretty beat up.
-
12-03-2019, 07:56 AM #1422Registered User
- Join Date
- Dec 2019
- Location
- Eastern PA
- Posts
- 30
Just had to say thanks for everyone who pulled these templates together and verified them - super helpful!!
-
12-03-2019, 12:50 PM #1423Registered User
- Join Date
- Oct 2017
- Posts
- 2,304
Last edited by kid-kapow; 12-04-2019 at 12:23 PM. Reason: add pic
-
12-03-2019, 07:38 PM #1424
Subscribed
Sent from my iPhone using TGR ForumsThat Don't Make No Sense
-
12-13-2019, 07:20 PM #1425Registered User
- Join Date
- Sep 2017
- Posts
- 5
Thanks to everyone who compiled these. I've used a few different templates and they've all worked perfectly
Bookmarks