Results 1,551 to 1,575 of 1728
Thread: Binding Mount Paper Templates
-
02-24-2021, 06:01 PM #1551
Sent from my iPhone using TGR Forums
-
02-26-2021, 03:22 PM #1552Registered User
- Join Date
- Apr 2020
- Posts
- 21
Im mounting a pair of Look SPX12 demo/rental. I have checked this massive thread but cant seem to find any template for them. I found something Rossi but that didn't work at all. The width between my holes are 33mm (give or take a few) both toe and heel. The distance between hole pairs are toe piece 92mm and heel 80mm. Anyone sitting on a template for this binding?
-
02-26-2021, 04:55 PM #1553
I'm guessing you looked at the Demo template I put up for the Axial 2? (It sounds like it's not even close.)
I'd be glad to help you create one.
It's not that hard.
You follow some steps to get measurements, and I'll crank the template. We might need 2-3 iterations before it's good, but it's really not that hard or even time-consuming.
-
02-26-2021, 11:03 PM #1554
-
02-27-2021, 01:22 AM #1555
Measured from a previous mount with said binding has 120 mm from toe piece rear holes to rec line, and 115 mm from heal piece front holes to rec line. 92 and 80 mm seems accurate. Holes closest to rec line, toe and heel plate 32 mm apart. Holes furthest from rec line 35 mm apart.
Caveat. Not confirmed 100% that this puts BC at rec line with binding set to corresponding boot size though.
-
03-01-2021, 06:49 PM #1556
Anyone mount kingpins with inserts? Anything special I need to know?
-
03-02-2021, 02:05 AM #1557Registered User
- Join Date
- Apr 2020
- Posts
- 21
Only mounted Kingpins once. Extremely sensitive plastic in the heel plate. Be careful so you dont thread to far when adjusting forward pressure. But if you already have them mounted and just are changing the holes into inserts I dont see any problems there
-
03-09-2021, 03:38 PM #1558Registered User
- Join Date
- Apr 2020
- Posts
- 21
Here we go again! Im mounting ATK Crest 10 (Hagan Pure 10 is the same binding branded for the american market). ATK are very generous and provide a paper template themselves. https://www.atkbindings.com/wp-conte...-crest8-10.pdf The problem is that the template is not made to mount according to boot center line and with a bsl-measurement to adapt. I find it extremely complicated to find a way to get the boot center properly and totally vertical down to the ski so therefore I prefer proper paper templates. Does anyone know of one?
-
03-10-2021, 08:18 AM #1559
Searched with no luck. Anyone have a template for Tyrolia SLR 7.5 AC junior binders? there is a demo plate involved. thanks!
-
03-13-2021, 01:56 PM #1560Minion
- Join Date
- Mar 2021
- Posts
- 1
-
03-18-2021, 10:50 AM #1561Minion
- Join Date
- Mar 2021
- Posts
- 1
Atomic M10/L10 demo paper template
Instead of me(new member) filtering thru the pages, does anyone have a link for an Atomic M10/L10 demo binding template?
-
03-25-2021, 03:00 AM #1562Registered User
- Join Date
- Apr 2020
- Posts
- 21
Anyone know of a template for Marker Free 200? The binding is really not new
-
04-07-2021, 06:18 AM #1563Minion
- Join Date
- Apr 2021
- Posts
- 1
Marker 4.5 junior bindings paper template
Hi,
Does anyone here have these?
Many thanks
-
05-21-2021, 09:48 AM #1564Registered User
- Join Date
- Mar 2009
- Location
- LA
- Posts
- 8
Dynafit Superlite 150/175 templates. Just a scan of the templates and a ruler for scale
https://drive.google.com/file/d/1xsm...ew?usp=sharing
-
08-18-2021, 01:52 PM #1565
Looking for a template for Look/Rossi/Dynastar NX7. I've searched with no luck. Wondering if it shares the PX pattern? thanks.
-
08-18-2021, 02:33 PM #1566Minion
- Join Date
- Aug 2021
- Posts
- 1
what template works for Atomic Z12?
The Atomic Z12 has been around a long time, maybe something else works for it? it has the 3 point toe
I paid about $35 new and need to mount then on my Olin Mark VI SL Comps
Edit...found it in a Saloman template
-
09-04-2021, 12:07 PM #1567"Poop is funny" - Frank Reynolds
www.experiencedgear.net
-
09-06-2021, 01:20 AM #1568
-
09-16-2021, 09:26 AM #1569
Do the Guardians share toe holes with any other bindings? I was hoping to swap between Wardens and Guardians with some inserts but it looks like they don’t share a toe mount.
Why? I have several pairs of already drilled skis. Wouldn’t mind the weight savings of ditching the Guardians for days I’m not planning on bringing skins (most days). Don’t want to move the mount point though because I like them where they are.
-
09-21-2021, 07:53 PM #1570
-
10-19-2021, 10:23 PM #1571Registered User
- Join Date
- Dec 2020
- Posts
- 679
Is the Salomon template in the first post compatible with STH2 or only older STH/916 bindings?
-
10-21-2021, 11:40 PM #1572
That link is for the older STH/916 hole pattern.
Here's a link for the STH2/Warden template: https://drive.google.com/file/d/1maC...gb1PXF1e1/view
-
10-22-2021, 12:27 AM #1573Registered User
- Join Date
- Dec 2020
- Posts
- 679
-
11-02-2021, 02:03 PM #1574Registered User
- Join Date
- Oct 2019
- Posts
- 26
Does anyone have a template for Ski Trab? Specifically, Titan Vario.2. I've been looking everywhere and can't seem to find even a jig.
-
11-03-2021, 11:06 AM #1575Registered User
- Join Date
- Oct 2003
- Posts
- 1,037
What hole pattern does Dynafit adjustment plate use ?
https://www.dynafit.com/en-us/adj-pl...-08-0000048786
Bookmarks